| CVE-2025-21785 | In the Linux kernel, the following vulnerability has been resolved: arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array The loop that detects/populates cache information already has a bounds check on the array size but does not account for cache levels with separate data/instructions cache. Fix this by incrementing the index for any populated leaf (instead of any populated level). | high | 2026-07-30 |
| CVE-2025-21778 | In the Linux kernel, the following vulnerability has been resolved: tracing: Do not allow mmap() of persistent ring buffer When trying to mmap a trace instance buffer that is attached to reserve_mem, it would crash: BUG: unable to handle page fault for address: ffffe97bd00025c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2862f3067 P4D 2862f3067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:validate_page_before_insert+0x5/0xb0 Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89 RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246 RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29 RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08 RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000 R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000 FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x1f ? __die+0x2e/0x40 ? page_fault_oops+0x157/0x2b0 ? search_module_extables+0x53/0x80 ? validate_page_before_insert+0x5/0xb0 ? kernelmode_fixup_or_oops.isra.0+0x5f/0x70 ? __bad_area_nosemaphore+0x16e/0x1b0 ? bad_area_nosemaphore+0x16/0x20 ? do_kern_addr_fault+0x77/0x90 ? exc_page_fault+0x22b/0x230 ? asm_exc_page_fault+0x2b/0x30 ? validate_page_before_insert+0x5/0xb0 ? vm_insert_pages+0x151/0x400 __rb_map_vma+0x21f/0x3f0 ring_buffer_map+0x21b/0x2f0 tracing_buffers_mmap+0x70/0xd0 __mmap_region+0x6f0/0xbd0 mmap_region+0x7f/0x130 do_mmap+0x475/0x610 vm_mmap_pgoff+0xf2/0x1d0 ksys_mmap_pgoff+0x166/0x200 __x64_sys_mmap+0x37/0x50 x64_sys_call+0x1670/0x1d70 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reason was that the code that maps the ring buffer pages to user space has: page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]); And uses that in: vm_insert_pages(vma, vma->vm_start, pages, &nr_pages); But virt_to_page() does not work with vmap()'d memory which is what the persistent ring buffer has. It is rather trivial to allow this, but for now just disable mmap() of instances that have their ring buffer from the reserve_mem option. If an mmap() is performed on a persistent buffer it will return -ENODEV just like it would if the .mmap field wasn't defined in the file_operations structure. | medium | 2026-07-30 |
| CVE-2025-21772 | In the Linux kernel, the following vulnerability has been resolved: partitions: mac: fix handling of bogus partition table Fix several issues in partition probing: - The bailout for a bad partoffset must use put_dev_sector(), since the preceding read_part_sector() succeeded. - If the partition table claims a silly sector size like 0xfff bytes (which results in partition table entries straddling sector boundaries), bail out instead of accessing out-of-bounds memory. - We must not assume that the partition table contains proper NUL termination - use strnlen() and strncmp() instead of strlen() and strcmp(). | high | 2026-07-30 |
| CVE-2025-21766 | In the Linux kernel, the following vulnerability has been resolved: ipv4: use RCU protection in __ip_rt_update_pmtu() __ip_rt_update_pmtu() must use RCU protection to make sure the net structure it reads does not disappear. | medium | 2026-07-30 |
| CVE-2025-21765 | In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU protection in ip6_default_advmss() ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear. | medium | 2026-07-30 |
| CVE-2025-21762 | In the Linux kernel, the following vulnerability has been resolved: arp: use RCU protection in arp_xmit() arp_xmit() can be called without RTNL or RCU protection. Use RCU protection to avoid potential UAF. | high | 2026-07-30 |
| CVE-2025-21760 | In the Linux kernel, the following vulnerability has been resolved: ndisc: extend RCU protection in ndisc_send_skb() ndisc_send_skb() can be called without RTNL or RCU held. Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu() and avoid a potential UAF. | high | 2026-07-30 |
| CVE-2025-21758 | In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: add RCU protection to mld_newpack() mld_newpack() can be called without RTNL or RCU being held. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection. | medium | 2026-07-30 |
| CVE-2025-21748 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix integer overflows on 32 bit systems On 32bit systems the addition operations in ipc_msg_alloc() can potentially overflow leading to memory corruption. Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow. | medium | 2026-07-30 |
| CVE-2025-21738 | In the Linux kernel, the following vulnerability has been resolved: ata: libata-sff: Ensure that we cannot write outside the allocated buffer reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to write outside the allocated buffer, overwriting random memory. While a ATA device is supposed to abort a ATA_NOP command, there does seem to be a bug either in libata-sff or QEMU, where either this status is not set, or the status is cleared before read by ata_sff_hsm_move(). Anyway, that is most likely a separate bug. Looking at __atapi_pio_bytes(), it already has a safety check to ensure that __atapi_pio_bytes() cannot write outside the allocated buffer. Add a similar check to ata_pio_sector(), such that also ata_pio_sector() cannot write outside the allocated buffer. | medium | 2026-07-30 |
| CVE-2025-21735 | In the Linux kernel, the following vulnerability has been resolved: NFC: nci: Add bounds checking in nci_hci_create_pipe() The "pipe" variable is a u8 which comes from the network. If it's more than 127, then it results in memory corruption in the caller, nci_hci_connect_gate(). | high | 2026-07-30 |
| CVE-2025-21734 | In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix copy buffer page size For non-registered buffer, fastrpc driver copies the buffer and pass it to the remote subsystem. There is a problem with current implementation of page size calculation which is not considering the offset in the calculation. This might lead to passing of improper and out-of-bounds page size which could result in memory issue. Calculate page start and page end using the offset adjusted address instead of absolute address. | high | 2026-07-30 |
| CVE-2025-21730 | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid to init mgnt_entry list twice when WoWLAN failed If WoWLAN failed in resume flow, the rtw89_ops_add_interface() triggered without removing the interface first. Then the mgnt_entry list init again, causing the list_empty() check in rtw89_chanctx_ops_assign_vif() useless, and list_add_tail() again. Therefore, we have added a check to prevent double adding of the list. rtw89_8852ce 0000:01:00.0: failed to check wow status disabled rtw89_8852ce 0000:01:00.0: wow: failed to check disable fw ready rtw89_8852ce 0000:01:00.0: wow: failed to swap to normal fw rtw89_8852ce 0000:01:00.0: failed to disable wow rtw89_8852ce 0000:01:00.0: failed to resume for wow -110 rtw89_8852ce 0000:01:00.0: MAC has already powered on i2c_hid_acpi i2c-ILTK0001:00: PM: acpi_subsys_resume+0x0/0x60 returned 0 after 284705 usecs list_add corruption. prev->next should be next (ffff9d9719d82228), but was ffff9d9719f96030. (prev=ffff9d9719f96030). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:34! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 6918 Comm: kworker/u8:19 Tainted: G U O Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.514.0 03/25/2024 Workqueue: events_unbound async_run_entry_fn RIP: 0010:__list_add_valid_or_report+0x9f/0xb0 Code: e8 56 89 ff ff 0f 0b 48 c7 c7 3e fc e0 96 48 89 c6 e8 45 89 ff ... RSP: 0018:ffffa51b42bbbaf0 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff9d9719d82ab0 RCX: 13acb86e047a4400 RDX: 3fffffffffffffff RSI: 0000000000000000 RDI: 00000000ffffdfff RBP: ffffa51b42bbbb28 R08: ffffffff9768e250 R09: 0000000000001fff R10: ffffffff9765e250 R11: 0000000000005ffd R12: ffff9d9719f95c40 R13: ffff9d9719f95be8 R14: ffff9d97081bfd78 R15: ffff9d9719d82060 FS: 0000000000000000(0000) GS:ffff9d9a6fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007e7d029a4060 CR3: 0000000345e38000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? die+0xaa/0xd0 ? do_trap+0x9f/0x170 ? __list_add_valid_or_report+0x9f/0xb0 ? __list_add_valid_or_report+0x9f/0xb0 ? handle_invalid_op+0x69/0x90 ? __list_add_valid_or_report+0x9f/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x9f/0xb0 rtw89_chanctx_ops_assign_vif+0x1f9/0x210 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1] ? __mutex_unlock_slowpath+0xa0/0xf0 rtw89_ops_assign_vif_chanctx+0x4b/0x90 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1] drv_assign_vif_chanctx+0xa7/0x1f0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6] ieee80211_reconfig+0x9cb/0x17b0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] ? dev_printk_emit+0x51/0x70 ? _dev_info+0x6e/0x90 wiphy_resume+0x89/0x180 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] dpm_run_callback+0x37/0x1e0 device_resume+0x26d/0x4b0 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x29/0xd0 worker_thread+0x397/0x970 kthread+0xed/0x110 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> | medium | 2026-07-30 |
| CVE-2025-21725 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix oops due to unset link speed It isn't guaranteed that NETWORK_INTERFACE_INFO::LinkSpeed will always be set by the server, so the client must handle any values and then prevent oopses like below from happening: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 1323 Comm: cat Not tainted 6.13.0-rc7 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:cifs_debug_data_proc_show+0xa45/0x1460 [cifs] Code: 00 00 48 89 df e8 3b cd 1b c1 41 f6 44 24 2c 04 0f 84 50 01 00 00 48 89 ef e8 e7 d0 1b c1 49 8b 44 24 18 31 d2 49 8d 7c 24 28 <48> f7 74 24 18 48 89 c3 e8 6e cf 1b c1 41 8b 6c 24 28 49 8d 7c 24 RSP: 0018:ffffc90001817be0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811230022c RCX: ffffffffc041bd99 RDX: 0000000000000000 RSI: 0000000000000567 RDI: ffff888112300228 RBP: ffff888112300218 R08: fffff52000302f5f R09: ffffed1022fa58ac R10: ffff888117d2c566 R11: 00000000fffffffe R12: ffff888112300200 R13: 000000012a15343f R14: 0000000000000001 R15: ffff888113f2db58 FS: 00007fe27119e740(0000) GS:ffff888148600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe2633c5000 CR3: 0000000124da0000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0x159/0x1b0 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? do_error_trap+0x90/0x130 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? exc_divide_error+0x39/0x50 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? asm_exc_divide_error+0x1a/0x20 ? cifs_debug_data_proc_show+0xa39/0x1460 [cifs] ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? seq_read_iter+0x42e/0x790 seq_read_iter+0x19a/0x790 proc_reg_read_iter+0xbe/0x110 ? __pfx_proc_reg_read_iter+0x10/0x10 vfs_read+0x469/0x570 ? do_user_addr_fault+0x398/0x760 ? __pfx_vfs_read+0x10/0x10 ? find_held_lock+0x8a/0xa0 ? __pfx_lock_release+0x10/0x10 ksys_read+0xd3/0x170 ? __pfx_ksys_read+0x10/0x10 ? __rcu_read_unlock+0x50/0x270 ? mark_held_locks+0x1a/0x90 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe271288911 Code: 00 48 8b 15 01 25 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d b5 a7 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007ffe87c079d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007fe271288911 RDX: 0000000000040000 RSI: 00007fe2633c6000 RDI: 0000000000000003 RBP: 00007ffe87c07a00 R08: 0000000000000000 R09: 00007fe2713e6380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007fe2633c6000 R14: 0000000000000003 R15: 0000000000000000 </TASK> Fix this by setting cifs_server_iface::speed to a sane value (1Gbps) by default when link speed is unset. | medium | 2026-07-30 |
| CVE-2025-21720 | In the Linux kernel, the following vulnerability has been resolved: xfrm: delete intermediate secpath entry in packet offload mode Packets handled by hardware have added secpath as a way to inform XFRM core code that this path was already handled. That secpath is not needed at all after policy is checked and it is removed later in the stack. However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward), that secpath is not removed and packets which already were handled are reentered to the driver TX path with xfrm_offload set. The following kernel panic is observed in mlx5 in such case: mlx5_core 0000:04:00.0 enp4s0f0np0: Link up mlx5_core 0000:04:00.1 enp4s0f1np1: Link up Initializing XFRM netlink socket IPsec XFRM device driver BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] PREEMPT SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? show_regs+0x63/0x70 ? __die_body+0x20/0x60 ? __die+0x2b/0x40 ? page_fault_oops+0x15c/0x550 ? do_user_addr_fault+0x3ed/0x870 ? exc_page_fault+0x7f/0x190 ? asm_exc_page_fault+0x27/0x30 mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core] mlx5e_xmit+0x58e/0x1980 [mlx5_core] ? __fib_lookup+0x6a/0xb0 dev_hard_start_xmit+0x82/0x1d0 sch_direct_xmit+0xfe/0x390 __dev_queue_xmit+0x6d8/0xee0 ? __fib_lookup+0x6a/0xb0 ? internal_add_timer+0x48/0x70 ? mod_timer+0xe2/0x2b0 neigh_resolve_output+0x115/0x1b0 __neigh_update+0x26a/0xc50 neigh_update+0x14/0x20 arp_process+0x2cb/0x8e0 ? __napi_build_skb+0x5e/0x70 arp_rcv+0x11e/0x1c0 ? dev_gro_receive+0x574/0x820 __netif_receive_skb_list_core+0x1cf/0x1f0 netif_receive_skb_list_internal+0x183/0x2a0 napi_complete_done+0x76/0x1c0 mlx5e_napi_poll+0x234/0x7a0 [mlx5_core] __napi_poll+0x2d/0x1f0 net_rx_action+0x1a6/0x370 ? atomic_notifier_call_chain+0x3b/0x50 ? irq_int_handler+0x15/0x20 [mlx5_core] handle_softirqs+0xb9/0x2f0 ? handle_irq_event+0x44/0x60 irq_exit_rcu+0xdb/0x100 common_interrupt+0x98/0xc0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:pv_native_safe_halt+0xb/0x10 Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22 0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb 40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8 RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680 RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4 RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70 R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8 ? default_idle+0x9/0x20 arch_cpu_idle+0x9/0x10 default_idle_call+0x29/0xf0 do_idle+0x1f2/0x240 cpu_startup_entry+0x2c/0x30 rest_init+0xe7/0x100 start_kernel+0x76b/0xb90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc0/0x110 ? setup_ghcb+0xe/0x130 common_startup_64+0x13e/0x141 </TASK> Modules linked in: esp4_offload esp4 xfrm_interface xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binf ---truncated--- | medium | 2026-07-30 |
| CVE-2025-21719 | In the Linux kernel, the following vulnerability has been resolved: ipmr: do not call mr_mfc_uses_dev() for unres entries syzbot found that calling mr_mfc_uses_dev() for unres entries would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif alias to "struct sk_buff_head unresolved", which contain two pointers. This code never worked, lets remove it. [1] Unable to handle kernel paging request at virtual address ffff5fff2d536613 KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f] Modules linked in: CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline] lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334 Call trace: mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P) mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P) mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382 ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648 rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327 rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791 netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317 netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg net/socket.c:1055 [inline] sock_read_iter+0x2d8/0x40c net/socket.c:1125 new_sync_read fs/read_write.c:484 [inline] vfs_read+0x740/0x970 fs/read_write.c:565 ksys_read+0x15c/0x26c fs/read_write.c:708 | high | 2026-07-30 |
| CVE-2025-21718 | In the Linux kernel, the following vulnerability has been resolved: net: rose: fix timer races against user threads Rose timers only acquire the socket spinlock, without checking if the socket is owned by one user thread. Add a check and rearm the timers if needed. BUG: KASAN: slab-use-after-free in rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174 Read of size 2 at addr ffff88802f09b82a by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174 call_timer_fn+0x187/0x650 kernel/time/timer.c:1793 expire_timers kernel/time/timer.c:1844 [inline] __run_timers kernel/time/timer.c:2418 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2430 run_timer_base kernel/time/timer.c:2439 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2449 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1049 </IRQ> | high | 2026-07-30 |
| CVE-2025-21717 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: add missing cpu_to_node to kvzalloc_node in mlx5e_open_xdpredirect_sq kvzalloc_node is not doing a runtime check on the node argument (__alloc_pages_node_noprof does have a VM_BUG_ON, but it expands to nothing on !CONFIG_DEBUG_VM builds), so doing any ethtool/netlink operation that calls mlx5e_open on a CPU that's larger that MAX_NUMNODES triggers OOB access and panic (see the trace below). Add missing cpu_to_node call to convert cpu id to node id. [ 165.427394] mlx5_core 0000:5c:00.0 beth1: Link up [ 166.479327] BUG: unable to handle page fault for address: 0000000800000010 [ 166.494592] #PF: supervisor read access in kernel mode [ 166.505995] #PF: error_code(0x0000) - not-present page ... [ 166.816958] Call Trace: [ 166.822380] <TASK> [ 166.827034] ? __die_body+0x64/0xb0 [ 166.834774] ? page_fault_oops+0x2cd/0x3f0 [ 166.843862] ? exc_page_fault+0x63/0x130 [ 166.852564] ? asm_exc_page_fault+0x22/0x30 [ 166.861843] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.871897] ? get_partial_node+0x1c/0x320 [ 166.880983] ? deactivate_slab+0x269/0x2b0 [ 166.890069] ___slab_alloc+0x521/0xa90 [ 166.898389] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.908442] __kmalloc_node_noprof+0x216/0x3f0 [ 166.918302] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.928354] __kvmalloc_node_noprof+0x43/0xd0 [ 166.938021] mlx5e_open_channels+0x5e2/0xc00 [ 166.947496] mlx5e_open_locked+0x3e/0xf0 [ 166.956201] mlx5e_open+0x23/0x50 [ 166.963551] __dev_open+0x114/0x1c0 [ 166.971292] __dev_change_flags+0xa2/0x1b0 [ 166.980378] dev_change_flags+0x21/0x60 [ 166.988887] do_setlink+0x38d/0xf20 [ 166.996628] ? ep_poll_callback+0x1b9/0x240 [ 167.005910] ? __nla_validate_parse.llvm.10713395753544950386+0x80/0xd70 [ 167.020782] ? __wake_up_sync_key+0x52/0x80 [ 167.030066] ? __mutex_lock+0xff/0x550 [ 167.038382] ? security_capable+0x50/0x90 [ 167.047279] rtnl_setlink+0x1c9/0x210 [ 167.055403] ? ep_poll_callback+0x1b9/0x240 [ 167.064684] ? security_capable+0x50/0x90 [ 167.073579] rtnetlink_rcv_msg+0x2f9/0x310 [ 167.082667] ? rtnetlink_bind+0x30/0x30 [ 167.091173] netlink_rcv_skb+0xb1/0xe0 [ 167.099492] netlink_unicast+0x20f/0x2e0 [ 167.108191] netlink_sendmsg+0x389/0x420 [ 167.116896] __sys_sendto+0x158/0x1c0 [ 167.125024] __x64_sys_sendto+0x22/0x30 [ 167.133534] do_syscall_64+0x63/0x130 [ 167.141657] ? __irq_exit_rcu.llvm.17843942359718260576+0x52/0xd0 [ 167.155181] entry_SYSCALL_64_after_hwframe+0x4b/0x53 | high | 2026-07-30 |
| CVE-2025-21712 | In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct md_bitmap_stats"), following panic is reported: Oops: general protection fault, probably for non-canonical address RIP: 0010:bitmap_get_stats+0x2b/0xa0 Call Trace: <TASK> md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that bitmap_get_stats() can be called at anytime if mddev is still there, even if bitmap is destroyed, or not fully initialized. Deferenceing bitmap in this case can crash the kernel. Meanwhile, the above commit start to deferencing bitmap->storage, make the problem easier to trigger. Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex. | medium | 2026-07-30 |
| CVE-2025-21710 | In the Linux kernel, the following vulnerability has been resolved: tcp: correct handling of extreme memory squeeze Testing with iperf3 using the "pasta" protocol splicer has revealed a problem in the way tcp handles window advertising in extreme memory squeeze situations. Under memory pressure, a socket endpoint may temporarily advertise a zero-sized window, but this is not stored as part of the socket data. The reasoning behind this is that it is considered a temporary setting which shouldn't influence any further calculations. However, if we happen to stall at an unfortunate value of the current window size, the algorithm selecting a new value will consistently fail to advertise a non-zero window once we have freed up enough memory. This means that this side's notion of the current window size is different from the one last advertised to the peer, causing the latter to not send any data to resolve the sitution. The problem occurs on the iperf3 server side, and the socket in question is a completely regular socket with the default settings for the fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket. The following excerpt of a logging session, with own comments added, shows more in detail what is happening: // tcp_v4_rcv(->) // tcp_rcv_established(->) [5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ==== [5201<->39222]: tcp_data_queue(->) [5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM [rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184] [copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0] [OFO queue: gap: 65480, len: 0] [5201<->39222]: tcp_data_queue(<-) [5201<->39222]: __tcp_transmit_skb(->) [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] [5201<->39222]: tcp_select_window(->) [5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] returning 0 [5201<->39222]: tcp_select_window(<-) [5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160 [5201<->39222]: [__tcp_transmit_skb(<-) [5201<->39222]: tcp_rcv_established(<-) [5201<->39222]: tcp_v4_rcv(<-) // Receive queue is at 85 buffers and we are out of memory. // We drop the incoming buffer, although it is in sequence, and decide // to send an advertisement with a window of zero. // We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means // we unconditionally shrink the window. [5201<->39222]: tcp_recvmsg_locked(->) [5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160 [5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368] [5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0] [5201<->39222]: NOT calling tcp_send_ack() [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] [5201<->39222]: __tcp_cleanup_rbuf(<-) [rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184] [copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0] returning 6104 bytes [5201<->39222]: tcp_recvmsg_locked(<-) // After each read, the algorithm for calculating the new receive // window in __tcp_cleanup_rbuf() finds it is too small to advertise // or to update tp->rcv_wnd. // Meanwhile, the peer thinks the window is zero, and will not send // any more data to trigger an update from the interrupt mode side. [5201<->39222]: tcp_recvmsg_locked(->) [5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160 [5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_n ---truncated--- | medium | 2026-07-30 |
| CVE-2025-21709 | In the Linux kernel, the following vulnerability has been resolved: kernel: be more careful about dup_mmap() failures and uprobe registering If a memory allocation fails during dup_mmap(), the maple tree can be left in an unsafe state for other iterators besides the exit path. All the locks are dropped before the exit_mmap() call (in mm/mmap.c), but the incomplete mm_struct can be reached through (at least) the rmap finding the vmas which have a pointer back to the mm_struct. Up to this point, there have been no issues with being able to find an mm_struct that was only partially initialised. Syzbot was able to make the incomplete mm_struct fail with recent forking changes, so it has been proven unsafe to use the mm_struct that hasn't been initialised, as referenced in the link below. Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to invalid mm") fixed the uprobe access, it does not completely remove the race. This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the oom side (even though this is extremely unlikely to be selected as an oom victim in the race window), and sets MMF_UNSTABLE to avoid other potential users from using a partially initialised mm_struct. When registering vmas for uprobe, skip the vmas in an mm that is marked unstable. Modifying a vma in an unstable mm may cause issues if the mm isn't fully initialised. | medium | 2026-07-30 |
| CVE-2025-21707 | In the Linux kernel, the following vulnerability has been resolved: mptcp: consolidate suboption status MPTCP maintains the received sub-options status is the bitmask carrying the received suboptions and in several bitfields carrying per suboption additional info. Zeroing the bitmask before parsing is not enough to ensure a consistent status, and the MPTCP code has to additionally clear some bitfiled depending on the actually parsed suboption. The above schema is fragile, and syzbot managed to trigger a path where a relevant bitfield is not cleared/initialized: BUG: KMSAN: uninit-value in __mptcp_expand_seq net/mptcp/options.c:1030 [inline] BUG: KMSAN: uninit-value in mptcp_expand_seq net/mptcp/protocol.h:864 [inline] BUG: KMSAN: uninit-value in ack_update_msk net/mptcp/options.c:1060 [inline] BUG: KMSAN: uninit-value in mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 __mptcp_expand_seq net/mptcp/options.c:1030 [inline] mptcp_expand_seq net/mptcp/protocol.h:864 [inline] ack_update_msk net/mptcp/options.c:1060 [inline] mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264 tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 do_softirq+0x9a/0x100 kernel/softirq.c:462 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4493 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236 __ip_finish_output+0x287/0x810 ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434 dst_output include/net/dst.h:450 [inline] ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x1f2a/0x20d0 net/ipv4/ip_output.c:536 ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:550 __tcp_transmit_skb+0x3cea/0x4900 net/ipv4/tcp_output.c:1468 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] ---truncated--- | medium | 2026-07-30 |
| CVE-2025-21701 | In the Linux kernel, the following vulnerability has been resolved: net: avoid race between device unregistration and ethnl ops The following trace can be seen if a device is being unregistered while its number of channels are being modified. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120 CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771 RIP: 0010:__mutex_lock+0xc8a/0x1120 Call Trace: <TASK> ethtool_check_max_channel+0x1ea/0x880 ethnl_set_channels+0x3c3/0xb10 ethnl_default_set_doit+0x306/0x650 genl_family_rcv_msg_doit+0x1e3/0x2c0 genl_rcv_msg+0x432/0x6f0 netlink_rcv_skb+0x13d/0x3b0 genl_rcv+0x28/0x40 netlink_unicast+0x42e/0x720 netlink_sendmsg+0x765/0xc20 __sys_sendto+0x3ac/0x420 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because unregister_netdevice_many_notify might run before the rtnl lock section of ethnl operations, eg. set_channels in the above example. In this example the rss lock would be destroyed by the device unregistration path before being used again, but in general running ethnl operations while dismantle has started is not a good idea. Fix this by denying any operation on devices being unregistered. A check was already there in ethnl_ops_begin, but not wide enough. Note that the same issue cannot be seen on the ioctl version (__dev_ethtool) because the device reference is retrieved from within the rtnl lock section there. Once dismantle started, the net device is unlisted and no reference will be found. | medium | 2026-07-30 |
| CVE-2025-21699 | In the Linux kernel, the following vulnerability has been resolved: gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag: depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two. | medium | 2026-07-30 |
| CVE-2025-21697 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Ensure job pointer is set to NULL after job completion After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished. | medium | 2026-07-30 |
| CVE-2025-21687 | In the Linux kernel, the following vulnerability has been resolved: vfio/platform: check the bounds of read/write syscalls count and offset are passed from user space and not checked, only offset is capped to 40 bits, which can be used to read/write out of bounds of the device. | high | 2026-07-30 |
| CVE-2025-21682 | In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: always recalculate features after XDP clearing, fix null-deref Recalculate features when XDP is detached. Before: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: off [requested on] After: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: on The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly. Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the: if (old_rx_rings != bp->hw_resc.resv_rx_rings && condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with: BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0 As we try to access a freed ring. The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues. | medium | 2026-07-30 |
| CVE-2025-21678 | In the Linux kernel, the following vulnerability has been resolved: gtp: Destroy device along with udp socket's netns dismantle. gtp_newlink() links the device to a list in dev_net(dev) instead of src_net, where a udp tunnel socket is created. Even when src_net is removed, the device stays alive on dev_net(dev). Then, removing src_net triggers the splat below. [0] In this example, gtp0 is created in ns2, and the udp socket is created in ns1. ip netns add ns1 ip netns add ns2 ip -n ns1 link add netns ns2 name gtp0 type gtp role sgsn ip netns del ns1 Let's link the device to the socket's netns instead. Now, gtp_net_exit_batch_rtnl() needs another netdev iteration to remove all gtp devices in the netns. [0]: ref_tracker: net notrefcnt@000000003d6e7d05 has 1/2 users at sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1558) udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18) gtp_create_sock (./include/net/udp_tunnel.h:59 drivers/net/gtp.c:1423) gtp_create_sockets (drivers/net/gtp.c:1447) gtp_newlink (drivers/net/gtp.c:1507) rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012) rtnetlink_rcv_msg (net/core/rtnetlink.c:6922) netlink_rcv_skb (net/netlink/af_netlink.c:2542) netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347) netlink_sendmsg (net/netlink/af_netlink.c:1891) ____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583) ___sys_sendmsg (net/socket.c:2639) __sys_sendmsg (net/socket.c:2669) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) WARNING: CPU: 1 PID: 60 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) Modules linked in: CPU: 1 UID: 0 PID: 60 Comm: kworker/u16:2 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179) Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89 RSP: 0018:ff11000009a07b60 EFLAGS: 00010286 RAX: 0000000000002bd3 RBX: ff1100000f4e1aa0 RCX: 1ffffffff0e40ac6 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c RBP: ff1100000f4e1af0 R08: 0000000000000001 R09: fffffbfff0e395ae R10: 0000000000000001 R11: 0000000000036001 R12: ff1100000f4e1af0 R13: dead000000000100 R14: ff1100000f4e1af0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9b2464bd98 CR3: 0000000005286005 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn (kernel/panic.c:748) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158) ? kfree (mm/slub.c:4613 mm/slub.c:4761) net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467) cleanup_net (net/core/net_namespace.c:664 (discriminator 3)) process_one_work (kernel/workqueue.c:3229) worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391 ---truncated--- | medium | 2026-07-30 |
| CVE-2025-21677 | In the Linux kernel, the following vulnerability has been resolved: pfcp: Destroy device along with udp socket's netns dismantle. pfcp_newlink() links the device to a list in dev_net(dev) instead of net, where a udp tunnel socket is created. Even when net is removed, the device stays alive on dev_net(dev). Then, removing net triggers the splat below. [0] In this example, pfcp0 is created in ns2, but the udp socket is created in ns1. ip netns add ns1 ip netns add ns2 ip -n ns1 link add netns ns2 name pfcp0 type pfcp ip netns del ns1 Let's link the device to the socket's netns instead. Now, pfcp_net_exit() needs another netdev iteration to remove all pfcp devices in the netns. pfcp_dev_list is not used under RCU, so the list API is converted to the non-RCU variant. pfcp_net_exit() can be converted to .exit_batch_rtnl() in net-next. [0]: ref_tracker: net notrefcnt@00000000128b34dc has 1/1 users at sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1558) udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18) pfcp_create_sock (drivers/net/pfcp.c:168) pfcp_newlink (drivers/net/pfcp.c:182 drivers/net/pfcp.c:197) rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012) rtnetlink_rcv_msg (net/core/rtnetlink.c:6922) netlink_rcv_skb (net/netlink/af_netlink.c:2542) netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347) netlink_sendmsg (net/netlink/af_netlink.c:1891) ____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583) ___sys_sendmsg (net/socket.c:2639) __sys_sendmsg (net/socket.c:2669) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) WARNING: CPU: 1 PID: 11 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) Modules linked in: CPU: 1 UID: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179) Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89 RSP: 0018:ff11000007f3fb60 EFLAGS: 00010286 RAX: 00000000000020ef RBX: ff1100000d6481e0 RCX: 1ffffffff0e40d82 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c RBP: ff1100000d648230 R08: 0000000000000001 R09: fffffbfff0e395af R10: 0000000000000001 R11: 0000000000000000 R12: ff1100000d648230 R13: dead000000000100 R14: ff1100000d648230 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005620e1363990 CR3: 000000000eeb2002 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn (kernel/panic.c:748) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158) ? kfree (mm/slub.c:4613 mm/slub.c:4761) net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467) cleanup_net (net/cor ---truncated--- | medium | 2026-07-30 |
| CVE-2025-21676 | In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. | medium | 2026-07-30 |
| CVE-2025-21673 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double free of TCP_Server_Info::hostname When shutting down the server in cifs_put_tcp_session(), cifsd thread might be reconnecting to multiple DFS targets before it realizes it should exit the loop, so @server->hostname can't be freed as long as cifsd thread isn't done. Otherwise the following can happen: RIP: 0010:__slab_free+0x223/0x3c0 Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89 1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f> 0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80 RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246 RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068 RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400 RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000 R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500 R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068 FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000) 000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4: PKRU: 55555554 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __reconnect_target_unlocked+0x3e/0x160 [cifs] ? __die_body.cold+0x8/0xd ? die+0x2b/0x50 ? do_trap+0xce/0x120 ? __slab_free+0x223/0x3c0 ? do_error_trap+0x65/0x80 ? __slab_free+0x223/0x3c0 ? exc_invalid_op+0x4e/0x70 ? __slab_free+0x223/0x3c0 ? asm_exc_invalid_op+0x16/0x20 ? __slab_free+0x223/0x3c0 ? extract_hostname+0x5c/0xa0 [cifs] ? extract_hostname+0x5c/0xa0 [cifs] ? __kmalloc+0x4b/0x140 __reconnect_target_unlocked+0x3e/0x160 [cifs] reconnect_dfs_server+0x145/0x430 [cifs] cifs_handle_standard+0x1ad/0x1d0 [cifs] cifs_demultiplex_thread+0x592/0x730 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> | medium | 2026-07-30 |
| CVE-2025-21669 | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: discard packets if the transport changes If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference. | medium | 2026-07-30 |
| CVE-2025-21664 | In the Linux kernel, the following vulnerability has been resolved: dm thin: make get_first_thin use rcu-safe list first function The documentation in rculist.h explains the absence of list_empty_rcu() and cautions programmers against relying on a list_empty() -> list_first() sequence in RCU safe code. This is because each of these functions performs its own READ_ONCE() of the list head. This can lead to a situation where the list_empty() sees a valid list entry, but the subsequent list_first() sees a different view of list head state after a modification. In the case of dm-thin, this author had a production box crash from a GP fault in the process_deferred_bios path. This function saw a valid list head in get_first_thin() but when it subsequently dereferenced that and turned it into a thin_c, it got the inside of the struct pool, since the list was now empty and referring to itself. The kernel on which this occurred printed both a warning about a refcount_t being saturated, and a UBSAN error for an out-of-bounds cpuid access in the queued spinlock, prior to the fault itself. When the resulting kdump was examined, it was possible to see another thread patiently waiting in thin_dtr's synchronize_rcu. The thin_dtr call managed to pull the thin_c out of the active thins list (and have it be the last entry in the active_thins list) at just the wrong moment which lead to this crash. Fortunately, the fix here is straight forward. Switch get_first_thin() function to use list_first_or_null_rcu() which performs just a single READ_ONCE() and returns NULL if the list is already empty. This was run against the devicemapper test suite's thin-provisioning suites for delete and suspend and no regressions were observed. | medium | 2026-07-30 |
| CVE-2025-21663 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac-tegra: Read iommu stream id from device tree Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be written to the MGBE_WRAP_AXI_ASID0_CTRL register. The current driver is hard coded to use MGBE0's SID for all controllers. This causes softirq time outs and kernel panics when using controllers other than MGBE0. Example dmesg errors when an ethernet cable is connected to MGBE1: [ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms [ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter. [ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171) [ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features [ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock [ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode [ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337 [ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8) [ 181.921878] Sending NMI from CPU 4 to CPUs 7: [ 181.921886] NMI backtrace for cpu 7 [ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 181.922847] pc : handle_softirqs+0x98/0x368 [ 181.922978] lr : __do_softirq+0x18/0x20 [ 181.923095] sp : ffff80008003bf50 [ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74 [ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1 [ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 181.967591] Call trace: [ 181.970043] handle_softirqs+0x98/0x368 (P) [ 181.974240] __do_softirq+0x18/0x20 [ 181.977743] ____do_softirq+0x14/0x28 [ 181.981415] call_on_irq_stack+0x24/0x30 [ 181.985180] do_softirq_own_stack+0x20/0x30 [ 181.989379] __irq_exit_rcu+0x114/0x140 [ 181.993142] irq_exit_rcu+0x14/0x28 [ 181.996816] el1_interrupt+0x44/0xb8 [ 182.000316] el1h_64_irq_handler+0x14/0x20 [ 182.004343] el1h_64_irq+0x80/0x88 [ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P) [ 182.012305] cpuidle_enter+0x3c/0x58 [ 182.015980] cpuidle_idle_call+0x128/0x1c0 [ 182.020005] do_idle+0xe0/0xf0 [ 182.023155] cpu_startup_entry+0x3c/0x48 [ 182.026917] secondary_start_kernel+0xdc/0x120 [ 182.031379] __secondary_switched+0x74/0x78 [ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/. [ 212.985935] rcu: blocking rcu_node structures (internal RCU debug): [ 212.992758] Sending NMI from CPU 0 to CPUs 7: [ 212.998539] NMI backtrace for cpu 7 [ 213.004304] CPU: 7 UID: 0 PI ---truncated--- | medium | 2026-07-30 |
| CVE-2025-21661 | In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix missing lookup table cleanups When a virtuser device is created via configfs and the probe fails due to an incorrect lookup table, the table is not removed. This prevents subsequent probe attempts from succeeding, even if the issue is corrected, unless the device is released. Additionally, cleanup is also needed in the less likely case of platform_device_register_full() failure. Besides, a consistent memory leak in lookup_table->dev_id was spotted using kmemleak by toggling the live state between 0 and 1 with a correct lookup table. Introduce gpio_virtuser_remove_lookup_table() as the counterpart to the existing gpio_virtuser_make_lookup_table() and call it from all necessary points to ensure proper cleanup. | medium | 2026-07-30 |
| CVE-2025-21659 | In the Linux kernel, the following vulnerability has been resolved: netdev: prevent accessing NAPI instances from another namespace The NAPI IDs were not fully exposed to user space prior to the netlink API, so they were never namespaced. The netlink API must ensure that at the very least NAPI instance belongs to the same netns as the owner of the genl sock. napi_by_id() can become static now, but it needs to move because of dev_get_by_napi_id(). | medium | 2026-07-30 |
| CVE-2025-21655 | In the Linux kernel, the following vulnerability has been resolved: io_uring/eventfd: ensure io_eventfd_signal() defers another RCU period io_eventfd_do_signal() is invoked from an RCU callback, but when dropping the reference to the io_ev_fd, it calls io_eventfd_free() directly if the refcount drops to zero. This isn't correct, as any potential freeing of the io_ev_fd should be deferred another RCU grace period. Just call io_eventfd_put() rather than open-code the dec-and-test and free, which will correctly defer it another RCU grace period. | medium | 2026-07-30 |
| CVE-2025-21650 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 | high | 2026-07-30 |
| CVE-2025-21647 | In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: add bounds checks to host bulk flow fairness counts Even though we fixed a logic error in the commit cited below, syzbot still managed to trigger an underflow of the per-host bulk flow counters, leading to an out of bounds memory access. To avoid any such logic errors causing out of bounds memory accesses, this commit factors out all accesses to the per-host bulk flow counters to a series of helpers that perform bounds-checking before any increments and decrements. This also has the benefit of improving readability by moving the conditional checks for the flow mode into these helpers, instead of having them spread out throughout the code (which was the cause of the original logic error). As part of this change, the flow quantum calculation is consolidated into a helper function, which means that the dithering applied to the ost load scaling is now applied both in the DRR rotation and when a sparse flow's quantum is first initiated. The only user-visible effect of this is that the maximum packet size that can be sent while a flow stays sparse will now vary with +/- one byte in some cases. This should not make a noticeable difference in practice, and thus it's not worth complicating the code to preserve the old behaviour. | high | 2026-07-30 |
| CVE-2025-21646 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix the maximum cell name length The kafs filesystem limits the maximum length of a cell to 256 bytes, but a problem occurs if someone actually does that: kafs tries to create a directory under /proc/net/afs/ with the name of the cell, but that fails with a warning: WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405 because procfs limits the maximum filename length to 255. However, the DNS limits the maximum lookup length and, by extension, the maximum cell name, to 255 less two (length count and trailing NUL). Fix this by limiting the maximum acceptable cellname length to 253. This also allows us to be sure we can create the "/afs/.<cell>/" mountpoint too. Further, split the YFS VL record cell name maximum to be the 256 allowed by the protocol and ignore the record retrieved by YFSVL.GetCellName if it exceeds 253. | medium | 2026-07-30 |
| CVE-2025-21640 | In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is used. | medium | 2026-07-30 |
| CVE-2025-21638 | In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: auth_enable: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. | medium | 2026-07-30 |
| CVE-2025-21637 | In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. | medium | 2026-07-30 |
| CVE-2025-21629 | In the Linux kernel, the following vulnerability has been resolved: net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets The blamed commit disabled hardware offoad of IPv6 packets with extension headers on devices that advertise NETIF_F_IPV6_CSUM, based on the definition of that feature in skbuff.h: * * - %NETIF_F_IPV6_CSUM * - Driver (device) is only able to checksum plain * TCP or UDP packets over IPv6. These are specifically * unencapsulated packets of the form IPv6|TCP or * IPv6|UDP where the Next Header field in the IPv6 * header is either TCP or UDP. IPv6 extension headers * are not supported with this feature. This feature * cannot be set in features for a device with * NETIF_F_HW_CSUM also set. This feature is being * DEPRECATED (see below). The change causes skb_warn_bad_offload to fire for BIG TCP packets. [ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0 [ 496.310297] ? skb_warn_bad_offload+0xc4/0xe0 [ 496.310300] skb_checksum_help+0x129/0x1f0 [ 496.310303] skb_csum_hwoffload_help+0x150/0x1b0 [ 496.310306] validate_xmit_skb+0x159/0x270 [ 496.310309] validate_xmit_skb_list+0x41/0x70 [ 496.310312] sch_direct_xmit+0x5c/0x250 [ 496.310317] __qdisc_run+0x388/0x620 BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to communicate packet length, as this is an IPv6 jumbogram. But, the feature is only enabled on devices that support BIG TCP TSO. The header is only present for PF_PACKET taps like tcpdump, and not transmitted by physical devices. For this specific case of extension headers that are not transmitted, return to the situation before the blamed commit and support hardware offload. ipv6_has_hopopt_jumbo() tests not only whether this header is present, but also that it is the only extension header before a terminal (L4) header. | medium | 2026-07-30 |
| CVE-2025-12530 | IBM watsonx.data intelligence 5.2.2, 5.3.0, 5.3.1, 5.3.1 through Patch 1 transmits data in clear text that could allow an attacker to obtain sensitive information using man in the middle techniques. | medium | 2026-07-30 |
| CVE-2025-10656 | The Spreadsheet Price Changer for WooCommerce and WP E-commerce – Light plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 2.4.37 vi the user_filter function. This makes it possible for unauthenticated attackers to create admin accounts. | critical | 2026-07-30 |
| CVE-2025-0152 | IBM Engineering Requirements Management DOORS and DOORS Web Access 9.7.2.1 through 9.7.2.11, and 9.6.1.1 through 9.6.1.13 is vulnerable to cross-site scripting. This vulnerability allows an unauthenticated attacker to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | medium | 2026-07-30 |
| CVE-2024-58355 | Cal.com (calcom/cal.diy) versions through 4.7.15 contain a stored cross-site scripting vulnerability. The single booking view (e.g., https://app.cal.com/booking/<id>) renders booking-question field labels via React's dangerouslySetInnerHTML without sanitizing or escaping user input. An attacker who can create an event type with a malicious booking-question label can inject arbitrary HTML/JavaScript that executes when a victim opens the crafted booking URL. The issue is fixed in v4.7.16. | critical | 2026-07-30 |
| CVE-2024-58354 | cal.com (calcom repository, later renamed cal.diy) is affected by a repository takeover vulnerability in its GitHub Actions workflows. The workflow pr.yml uses the pull_request_target trigger with the repository's default write permissions and passes them down to check-types.yml. check-types.yml then performs a 'dangerous' checkout of the attacker-submitted pull request code (via the dangerous-git-checkout action) and subsequently executes it (through yarn install and package.json scripts). An attacker can open a pull request whose code runs arbitrary commands with the repository's write-scoped GITHUB_TOKEN, allowing them to push commits, merge or mutate pull requests, add or delete comments, and delete or force-push branches, thereby compromising the repository. The main branch is affected; no patched version is available. | high | 2026-07-30 |
| CVE-2024-58353 | Cal.com (repository calcom/cal.diy) in versions <= 4.7.15 is vulnerable to cross-site scripting (XSS) on the publicly accessible single booking view (e.g., /booking/<id>). Booking question (form field) labels are rendered via React's dangerouslySetInnerHTML without proper input sanitization or CSP, so an attacker who can create an event type with a malicious booking question label can inject arbitrary HTML/JavaScript that executes when a victim visits the booking view URL. Self-hosted instances with open registration are particularly at risk. The issue is fixed in version 4.7.16. | critical | 2026-07-30 |
