| CVE-2026-74297 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values. | high | 2026-10-16 |
| CVE-2026-74296 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one Free the UAR index returned by the hardware. | high | 2026-10-16 |
| CVE-2026-74295 | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value. | high | 2026-10-16 |
| CVE-2026-74294 | In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: aiu: Validate written enum values The AIU HDMI and internal codec mux put callbacks use the written enum value with snd_soc_enum_item_to_val() before checking whether the value is valid for the enumeration. Reject out-of-range values before converting the enum item, matching the validation already done by the G12A HDMI and internal codec mux controls. | high | 2026-10-16 |
| CVE-2026-74293 | In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_audmix: Validate written enum values fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src() convert the user-provided enum item with snd_soc_enum_item_to_val() before checking whether the item is within the enum's item count. The generic snd_soc_put_enum_double() helper performs that validation, but these callbacks use the converted value first: the clock-source path tests it with BIT(), and the output-source path indexes the prms transition table with it. Reject out-of-range enum items before converting them. | high | 2026-10-16 |
| CVE-2026-74292 | In the Linux kernel, the following vulnerability has been resolved: ASoC: tegra: tegra210_ahub: Validate written enum value tegra_ahub_put_value_enum() reads e->values[item[0]] before checking whether item[0] is within the enum item range. The existing check therefore happens too late to prevent an out-of-range read of the values array. Move the check before the array access. | high | 2026-10-16 |
| CVE-2026-74289 | In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't dump dying fib_info in fib_leaf_notify(). syzbot reported use-after-free in nsim_fib4_prepare_event(). [0] The problem is that the following functions call fib_info_hold() / refcount_inc() while dumping fib_info under RCU, which is unsafe. * mlxsw_sp_router_fib4_event() * rocker_router_fib_event() * nsim_fib4_prepare_event() refcount_inc_not_zero() must be used, but it would be too late there. Let's guarantee the lifetime of fib_info in fib_leaf_notify(). Note that IPv6 does not need the corresponding change since fib6_table_dump() holds fib6_table.tb6_lock. [0]: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25, CPU#0: kworker/u8:15/3420 Modules linked in: CPU: 0 UID: 0 PID: 3420 Comm: kworker/u8:15 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 Workqueue: netns cleanup_net RIP: 0010:refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25 Code: eb 66 85 db 74 3e 83 fb 01 75 4c e8 1b f1 22 fd 48 8d 3d 84 cb f1 0a 67 48 0f b9 3a eb 4a e8 08 f1 22 fd 48 8d 3d 81 cb f1 0a <67> 48 0f b9 3a eb 37 e8 f5 f0 22 fd 48 8d 3d 7e cb f1 0a 67 48 0f RSP: 0018:ffffc9000f2c7270 EFLAGS: 00010293 RAX: ffffffff84a18858 RBX: 0000000000000002 RCX: ffff888032ff9ec0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8f9353e0 RBP: 0000000000000000 R08: ffff888032ff9ec0 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880570cc000 R13: dffffc0000000000 R14: ffff88802b40563c R15: ffff8880570cc000 FS: 0000000000000000(0000) GS:ffff888126173000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1f4d5d000 CR3: 000000006072a000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] fib_info_hold include/net/ip_fib.h:629 [inline] nsim_fib4_prepare_event drivers/net/netdevsim/fib.c:930 [inline] nsim_fib_event_schedule_work drivers/net/netdevsim/fib.c:1000 [inline] nsim_fib_event_nb+0x1055/0x1240 drivers/net/netdevsim/fib.c:1043 call_fib_notifier+0x45/0x80 net/core/fib_notifier.c:25 call_fib_entry_notifier net/ipv4/fib_trie.c:90 [inline] fib_leaf_notify net/ipv4/fib_trie.c:2176 [inline] fib_table_notify net/ipv4/fib_trie.c:2194 [inline] fib_notify+0x36b/0x5e0 net/ipv4/fib_trie.c:2217 fib_net_dump net/core/fib_notifier.c:70 [inline] register_fib_notifier+0x184/0x360 net/core/fib_notifier.c:108 nsim_fib_create+0x85d/0x9f0 drivers/net/netdevsim/fib.c:1596 nsim_dev_reload_create drivers/net/netdevsim/dev.c:1604 [inline] nsim_dev_reload_up+0x374/0x7c0 drivers/net/netdevsim/dev.c:1058 devlink_reload+0x501/0x8d0 net/devlink/dev.c:475 devlink_pernet_pre_exit+0x1ff/0x420 net/devlink/core.c:558 ops_pre_exit_list net/core/net_namespace.c:161 [inline] ops_undo_list+0x187/0x940 net/core/net_namespace.c:234 cleanup_net+0x56e/0x800 net/core/net_namespace.c:702 process_one_work kernel/workqueue.c:3314 [inline] process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | high | 2026-10-16 |
| CVE-2026-74288 | In the Linux kernel, the following vulnerability has been resolved: net: fib_rules: Don't dump dying fib_rule in fib_rules_dump(). rocker_router_fib_event() calls fib_rule_get() during RCU dump. If the fib_rule is dying, refcount_inc() will complain about it. Let's call refcount_inc_not_zero() in fib_rules_dump(). | high | 2026-10-16 |
| CVE-2026-74287 | In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded address parameter length sctp_verify_asconf() and sctp_verify_param() only validate ADD_IP, DEL_IP, and SET_PRIMARY parameters against a fixed minimum size of sizeof(struct sctp_addip_param) + sizeof(struct sctp_paramhdr). This ensures the outer parameter is large enough to contain an embedded address parameter header, but does not verify that the embedded address parameter's declared length fits within the bounds of the outer parameter. Later, sctp_process_param() and sctp_process_asconf_param() extract the embedded address parameter and pass it to af->from_addr_param(), which uses the address parameter length to parse the variable-length address payload. A malformed peer can therefore advertise an embedded address parameter length that exceeds the remaining bytes in the enclosing parameter. Validate that addr_param->p.length does not exceed the space available after the sctp_addip_param header before processing the embedded address parameter. Reject malformed parameters when the embedded address length extends beyond the enclosing parameter bounds. This prevents out-of-bounds reads when parsing malformed parameters carried in INIT or ASCONF processing paths. | critical | 2026-10-16 |
| CVE-2026-74283 | In the Linux kernel, the following vulnerability has been resolved: tipc: require net admin for TIPCv2 netlink mutators TIPCv2 registers mutating generic-netlink operations without admin permission flags. Generic netlink only checks CAP_NET_ADMIN when an operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local unprivileged process can currently change TIPC state through commands such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and bearer enable/disable. The legacy TIPC netlink API already checks netlink_net_capable(..., CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which maps to the same namespace-aware CAP_NET_ADMIN check that netlink_net_capable() performs, so the behaviour matches the legacy path and keeps working for CAP_NET_ADMIN holders in a non-initial user namespace (containers). A QEMU/KASAN repro run as uid/gid 65534 with zero effective capabilities previously succeeded in changing the network id and node identity, setting and flushing key material, and enabling/disabling a UDP bearer. With this patch applied the same operations fail with -EPERM. | high | 2026-10-16 |
| CVE-2026-74282 | In the Linux kernel, the following vulnerability has been resolved: tipc: prevent snt_unacked underflow on CONN_ACK tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count from the unsigned 16-bit send counter snt_unacked without checking that it does not exceed the number of messages actually outstanding: tsk->snt_unacked -= msg_conn_ack(hdr); msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK message. If the ack count is larger than snt_unacked, the subtraction wraps to a near-maximum value, leaving tsk_conn_cong() permanently true and starving the connection of further transmits. Validate the ACK count at the start of the CONN_ACK block and drop the message if it acknowledges more messages than are outstanding. A peer (or, for a local connection, the connected peer socket) can otherwise wedge a TIPC connection's send side by sending an oversized connection ack. | high | 2026-10-16 |
| CVE-2026-74281 | In the Linux kernel, the following vulnerability has been resolved: tipc: reject inverted service ranges from peer bindings tipc_update_nametbl() inserts a binding advertised by a peer node using the lower and upper service-range bounds taken directly from the wire, without checking that lower <= upper. The local bind path validates the ordering (tipc_uaddr_valid()), but the name-distribution path does not. A binding with lower > upper is inserted at the far end of the service-range rbtree (keyed on lower) where no lookup or withdrawal can ever match it (service_range_foreach_match() requires sr->lower <= end). The publication, its service_range node and the augmented rbtree entry are then leaked for the lifetime of the namespace, and there is no per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings. Reject inverted ranges in the network path as well. A peer node can otherwise leak unbounded binding-table memory by sending PUBLICATION items with lower > upper. | high | 2026-10-16 |
| CVE-2026-74279 | In the Linux kernel, the following vulnerability has been resolved: crypto: cavium/cpt - fix DMA cleanup using wrong loop index The sg_cleanup error path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one. | critical | 2026-10-16 |
| CVE-2026-74277 | In the Linux kernel, the following vulnerability has been resolved: iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length of the current scatterlist segment `s` is incorrectly assigned from the head entry `sg->length` instead of the current entry `s->length`. This typo causes all P2PDMA segments in the scatterlist to inherit the length of the first segment, leading to corrupted DMA lengths for multi- segment scatterlists. Fix this by using `s->length` instead of `sg->length`. | high | 2026-10-16 |
| CVE-2026-74270 | In the Linux kernel, the following vulnerability has been resolved: handshake: Require admin permission for DONE command ACCEPT and DONE are the two downcalls of the handshake genl family, both intended for use by the trusted handshake agent (tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has no privilege check at all. The fd-lookup in handshake_nl_done_doit() only confirms that some pending handshake request exists for the supplied sockfd; it does not authenticate the sender. An unprivileged process that guesses or observes a valid sockfd can therefore submit a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel consumer to proceed as if the handshake succeeded. A non-zero status on a forged DONE tears down a legitimate in-flight handshake before tlshd can report its real result. | high | 2026-10-16 |
| CVE-2026-74269 | In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | critical | 2026-10-16 |
| CVE-2026-74268 | In the Linux kernel, the following vulnerability has been resolved: tcp: clear sock_ops cb flags before force-closing a child socket A child socket inherits the listener's bpf_sock_ops_cb_flags via sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() / tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs without it. If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state() calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me(): WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550 RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799 Call Trace: <IRQ> tcp_done+0xba/0x250 net/ipv4/tcp.c:5095 tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787 tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926 tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164 </IRQ> The child is freed before it is ever established, so it should run no sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(), the common point for the IPv4, IPv6 and chtls forced-close paths and for the MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done() on a child that was never established too. | critical | 2026-10-16 |
| CVE-2026-74267 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a wild memory access when qfq has codel as a child: [ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full) [ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216 [ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000 [ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000 [ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024 [ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000 [ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578 [ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000 [ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0 [ 36.344359][ T370] PKRU: 55555554 [ 36.344481][ T370] Call Trace: ... [ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057) [ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. | critical | 2026-10-16 |
| CVE-2026-74264 | In the Linux kernel, the following vulnerability has been resolved: net: watchdog: fix refcount tracking races Blamed commit converted the untracked dev_hold()/dev_put() calls in the watchdog code to use the tracked dev_hold_track()/dev_put_track() (which were later renamed/interfaced to netdev_hold() and netdev_put()). By introducing dev->watchdog_dev_tracker to store the reference tracking information without adding synchronization between netdev_watchdog_up() and dev_watchdog(), it enabled the race condition where this pointer could be overwritten or freed concurrently, leading to the list corruption crash syzbot reported: list_del corruption, ffff888114a18c00->next is NULL kernel BUG at lib/list_debug.c:52 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 Workqueue: events_unbound linkwatch_event RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:246 [inline] list_move_tail include/linux/list.h:341 [inline] ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329 netdev_tracker_free include/linux/netdevice.h:4491 [inline] netdev_put include/linux/netdevice.h:4508 [inline] netdev_put include/linux/netdevice.h:4504 [inline] netdev_watchdog_down net/sched/sch_generic.c:600 [inline] dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363 dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397 linkwatch_do_dev net/core/link_watch.c:184 [inline] linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166 __linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314 process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 [inline] worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This patch has three coordinated parts: 1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations. 2) Remove netdev_watchdog_up() call from netif_carrier_on(): This ensures netdev_watchdog_up() is only called from process/BH context (via linkwatch workqueue dev_activate()), allowing us to use spin_lock_bh() for synchronization. 3) Synchronize watchdog up and watchdog timer: Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock. Only allocate a new tracker in netdev_watchdog_up() if one is not already present. In dev_watchdog(), ensure we don't release the tracker if the timer was rescheduled either by dev_watchdog() itself or concurrently by netdev_watchdog_up(). | high | 2026-10-16 |
| CVE-2026-74262 | In the Linux kernel, the following vulnerability has been resolved: kcm: use WRITE_ONCE() when changing lower socket callbacks kcm_attach() replaces a live lower TCP socket's sk_data_ready and sk_write_space callbacks with KCM handlers, and kcm_unattach() restores them later. Those callback-pointer updates are still plain stores even though the same fields can be read and invoked concurrently on other CPUs. If another CPU observes an older callback snapshot after the live field has already been restored, callback execution can run with a mismatched target and sk_user_data state, leading to stale or misdirected wakeups. Use WRITE_ONCE() for the callback replacement and restore operations so these shared callback fields follow the same visibility contract already established by the earlier 4022 fixes. | high | 2026-10-16 |
| CVE-2026-74259 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-74258 | In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/[email protected]/ | high | 2026-10-16 |
| CVE-2026-74257 | In the Linux kernel, the following vulnerability has been resolved: sockmap: Fix use-after-free in udp_bpf_recvmsg() syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0] sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock, but its processing is lockless. Thus, sk_msg_recvmsg() must be serialised by callers, otherwise multiple threads could touch the same sk_msg. For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock. Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited commit removed it. Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg(). Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not an option due to copy_page_to_iter() in sk_msg_recvmsg(). [0]: BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020 CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xba/0x230 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84 inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891 sock_recvmsg_nosec net/socket.c:1078 [inline] sock_recvmsg+0x1a8/0x270 net/socket.c:1100 ____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812 ___sys_recvmsg+0x215/0x590 net/socket.c:2854 do_recvmmsg+0x334/0x800 net/socket.c:2949 __sys_recvmmsg net/socket.c:3023 [inline] __do_sys_recvmmsg net/socket.c:3046 [inline] __se_sys_recvmmsg net/socket.c:3039 [inline] __x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb319f9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9 RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004 RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98 </TASK> Allocated by task 6019: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] alloc_sk_msg net/core/skmsg.c:510 [inline] sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612 sk_psock_verdict_apply net/core/skmsg.c:1038 [inline] sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236 udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045 sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257 __udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789 __udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline] udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475 __udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585 __udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318 dst_input include/net/dst.h:474 [inline] ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584 ip_list_rcv_finish net/ipv4/ip_inp ---truncated--- | high | 2026-10-16 |
| CVE-2026-74256 | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check start and len are u32, so u64 last = start + len; evaluates start + len in 32-bit and wraps before storing it in last. The bounds check if (start >= offset + l || last > msg->sg.size) return -EINVAL; can then be passed with an out-of-range start/len, after which the pop loop runs off the end of the scatterlist and sk_msg_shift_left() calls put_page() on the empty msg->sg.end slot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline] RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline] RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984 Call Trace: <TASK> bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8 bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746 sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934 tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline] tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583 __sock_sendmsg+0x153/0x1c0 net/socket.c:802 __sys_sendto+0x326/0x430 net/socket.c:2265 __x64_sys_sendto+0xe3/0x100 net/socket.c:2268 do_syscall_64+0x14c/0x480 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Widen the addition with a (u64) cast so the bound is evaluated in 64-bit and a len near U32_MAX no longer wraps below msg->sg.size. While here, change pop from int to u32. It counts bytes against the unsigned scatterlist lengths and can never be negative, so the signed type only invites sign-confusion in the pop loop. | high | 2026-10-16 |
| CVE-2026-74255 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in tipc_l2_send_msg() Syzbot reported a slab-use-after-free in ipvlan_hard_header() when called from tipc_l2_send_msg(). The root cause is that tipc_disable_l2_media() calls synchronize_net() while b->media_ptr is still valid. This allows concurrent RCU readers to obtain the device pointer after synchronize_net() has finished. The pointer is cleared later in bearer_disable(), but without any subsequent synchronization, allowing the device to be freed while still in use by readers. Fix this by clearing b->media_ptr in tipc_disable_l2_media() before calling synchronize_net(). This is safe to do now because the call order in bearer_disable() was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic") to call tipc_node_delete_links() (which needs the pointer) before disable_media(). https: //lore.kernel.org/netdev/[email protected]/T/#u | critical | 2026-10-16 |
| CVE-2026-74234 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | medium | 2026-10-16 |
| CVE-2026-74228 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-74227 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-74226 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-74040 | Wazuh versions from 3.9.0 before 4.14.8 contain an arbitrary file overwrite vulnerability in MasterHandler.process_files_from_worker allowing a cluster worker to overwrite protected master files. Attackers controlling a worker can use a trailing-slash basename bypass and missing extra_valid enforcement to overwrite ossec.conf and agent.conf, achieving root remote code execution across the manager and every agent. | critical | 2026-10-16 |
| CVE-2026-74033 | Wazuh from 4.1.1 before 4.14.8 contains a path traversal vulnerability in the get_lists() and delete_list_file() CDB list handlers that allows compromised cluster workers to read or delete master files. Attackers can send traversal or absolute-path filenames through the internal cluster RPC path, bypassing REST validation and RBAC to delete files like rbac.db. | high | 2026-10-16 |
| CVE-2026-73692 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | medium | 2026-10-16 |
| CVE-2026-73323 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-73261 | Mongoose is an embedded web server and network library. Prior to 7.23, the built-in TCP/IP stack enabled by MG_ENABLE_TCPIP in src/net_builtin.c does not reject a TCP option whose declared opts[1] length exceeds the remaining option bytes. In handle_opt(), a NOP followed by a truncated MSS option causes opts[3] to be read outside the declared options area and used as the low byte of dmss. An unauthenticated remote peer can corrupt the per-connection MSS value so later mg_send() calls transmit truncated or zero-length application payloads while the TCP connection otherwise appears healthy. This issue is fixed in version 7.23. | high | 2026-10-16 |
| CVE-2026-73260 | Mongoose is an embedded web server and network library. Prior to 7.23, the built-in TLS certificate parser selected by MG_TLS_BUILTIN fails to verify that a long-form DER element length fits within the remaining certificate buffer. In mg_der_to_tlv() and mg_der_next(), a peer-controlled length can advance the parser beyond the certificate and underflow the remaining uint32_t length, causing mg_tls_parse_cert_der() to continue walking an invalid pointer. An unauthenticated malicious TLS server, or a client presenting a certificate to a server configured for client certificates, can trigger an out-of-bounds read and denial of service during the handshake. This issue is fixed in version 7.23. | high | 2026-10-16 |
| CVE-2026-73252 | Mongoose is an embedded web server and network library. Prior to 7.23, the built-in TLS stack selected by MG_TLS_BUILTIN in src/tls_builtin.c accepts a TLS 1.3 record whose decrypted size is exactly the 16-byte authentication tag with no plaintext or ContentType byte. In mg_tls_recv_record(), the msgsz length check permits that record and the recv_len calculation underflows to SIZE_MAX, so a later handshake step treats stale buffer contents as a trusted message with an effectively unbounded length. An unauthenticated malicious TLS peer can trigger a heap out-of-bounds read before certificate or Finished validation, causing a remote denial of service. This issue is fixed in version 7.23. | high | 2026-10-16 |
| CVE-2026-73112 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-73111 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-73107 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-73106 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-73105 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-73104 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-73103 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-72968 | Use after free in Windows Program Compatibility Assistant Service allows an authorized attacker to elevate privileges locally. | high | 2026-10-16 |
| CVE-2026-72858 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-72845 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-16 |
| CVE-2026-72502 | In the Linux kernel, the following vulnerability has been resolved: tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF) When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535). This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535. However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel. If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer dereference because local TCP packets do not use frag_list. Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from ip6_default_advmss() when MTU is large. Also update the stale comment in ip6_default_advmss() which suggested that IPV6_MAXPLEN is returned to mean "any MSS". | high | 2026-10-16 |
| CVE-2026-72500 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free SRQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write the toggle values to an already-freed page. Move free_page() after bnxt_qplib_destroy_srq(). | high | 2026-10-16 |
| CVE-2026-72499 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free CQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write the toggle value to an already-freed page. Move free_page() after bnxt_qplib_destroy_cq. | high | 2026-10-16 |
| CVE-2026-72497 | In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a max slot check for SQ The variable WQE mode must be validated against the maximum slots supported by HW. The max supported value is 64K. Adding a max and min check and fail if user supplied value is more than the max supported and zero. | high | 2026-10-16 |
