| CVE-2026-11837 | A local privilege escalation vulnerability was found in the ansible.posix authorized_key module. The module's keyfile() function uses os.chown() instead of os.lchown() and opens files without O_NOFOLLOW when managing SSH authorized keys. An unprivileged local user can pre-stage symbolic links in their ~/.ssh directory to redirect file ownership changes to arbitrary system paths when an operator runs the authorized_key task as root, leading to local privilege escalation. | high | |
| CVE-2026-22747 | Vulnerability in Spring Spring Security. SubjectX500PrincipalExtractor does not correctly handle certain malformed X.509 certificate CN values, which can lead to reading the wrong value for the username. In a carefully crafted certificate, this can lead to an attacker impersonating another user. This issue affects Spring Security: from 7.0.0 through 7.0.4. | high | |
| CVE-2026-40976 | In certain circumstances, Spring Boot's default web security is ineffective allowing unauthorized access to all endpoints. For an application to be vulnerable, it must: be a servlet-based web application; have no Spring Security configuration of its own and rely on the default web security filter chain; depend on spring-boot-actuator-autoconfigure; not depend on spring-boot-health. If any of the above does not apply, the application is not vulnerable. Affected: Spring Boot 4.0.0–4.0.5; upgrade to 4.0.6 or later per vendor advisory. | critical | |
| CVE-2026-43618 | Rsync version 3.4.2 and prior contain an integer overflow vulnerability in the compressed-token decoder where a 32-bit signed counter is not checked for overflow, allowing a malicious sender to trigger an overflow that causes the receiver process to read and return data from outside the intended buffer bounds. Attackers can exploit this vulnerability to disclose process memory contents including environment variables, passwords, heap and stack data, and library memory pointers, significantly reducing ASLR effectiveness and facilitating further exploitation. | medium | |
| CVE-2026-46176 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path. | high | |
| CVE-2026-25535 | jsPDF is a library to generate PDFs in JavaScript. Prior to 4.2.0, user control of the first argument of the `addImage` method results in denial of service. If given the possibility to pass unsanitized image data or URLs to the `addImage` method, a user can provide a harmful GIF file that results in out of memory errors and denial of service. Harmful GIF files have large width and/or height entries in their headers, which lead to excessive memory allocation. Other affected methods are: `html`. The vulnerability has been fixed in jsPDF 4.2.0. As a workaround, sanitize image data or URLs before passing it to the addImage method or one of the other affected methods. | high | |
| CVE-2026-56914 | In multiple locations, there is a possible use-after-free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | high | |
| CVE-2026-3630 | Delta Electronics COMMGR2 has Stack-based Buffer Overflow vulnerability. | critical | |
| CVE-2026-3631 | Delta Electronics COMMGR2 has Buffer Over-read DoS vulnerability. | high | |
| CVE-2026-34184 | AlanWeb SCADA does not enforce authorization for some directories. This allows an unauthorized attacker to read all files in these directories and even execute some of them. Critically the attacker could run PHP scripts directly on the connected database. This issue was fixed in AlanWeb SCADA version 9.8.5 | high | |
| CVE-2026-5131 | GREENmod uses named pipes for communication between plugins, the web portal, and the system service, but the access control lists for these pipes are configured incorrectly. This allows an attacker to communicate with the stream and upload any XML or JSON file, which will be processed by the named pipe with the privileges of the user under whose context the service is running. This allows for Server-Side Request Forgery to any Windows system on which the agent is installed and which provides communication via SMB or WebDav. This issue was fixed in version 2.8.33. | medium | |
| CVE-2026-40550 | Multiple BinSoft products are vulnerable to Privilege Escalation due to excessive database privileges assigned to the user used by the application. An attacker with access to any running application instance connected to the backend server can extract database credentials from the application’s memory by inspecting the running process. While ability to retrieve credentials from memory is the expected behavior, the exposed credentials grant administrative access to the database, exceeding the privileges required for normal application functionality. This allows an attacker to perform actions beyond those permitted through the application interface. The described issue affects all published versions. The vendor stated that this issue is a direct result of the architecture model in which the software is distributed, and that it will be mitigated with a corrected installation manual. | medium | |
| CVE-2026-47900 | Logseq is vulnerable to a stored cross-site scripting (XSS). A malicious plugin can include a JavaScript payload in the "name" field of its "package.json" file, which is rendered using "innerHTML" without proper sanitization, allowing the execution of arbitrary code in the privileged host context. While only version v0.10.15 was tested and confirmed as vulnerable, status of other versions is unknown since this issue was not addressed by a patch. | medium | |
| CVE-2026-63302 | Quick.CMS is vulnerable to Local File Inclusion (LFI) in the admin.php endpoint via the p parameter. An authenticated attacker with admin privileges can include arbitrary files located within the application's directory structure via a crafted HTTP request. Successful exploitation allows disclosure of the server's directory structure and absolute file paths (path disclosure). The vendor assessed the likelihood of exploitation as very low and determined that a fix is not necessary. | medium | |
| CVE-2026-63303 | A Path Traversal vulnerability exists in Quick.CMS through the URI path component of HTTP requests, where the server fails to normalize dot-dot-slash (../) sequences before resolving and serving the requested file. An authenticated attacker with admin privileges can use this vulnerability to read contents of files located in the sibling directory of the webroot via a crafted HTTP request containing ../ sequences in the URI. The vendor assessed the likelihood of exploitation as very low and determined that a fix is not necessary. | medium | |
| CVE-2026-64971 | ATutor is vulnerable to Reflected XSS in restore functionality. An attacker can provide a specially crafted URL that, when opened, results in arbitrary JavaScript execution in the victim's browser. Product is no longer actively supported and the vulnerabilities have not been fixed. Only version 2.2.4 was tested and confirmed as vulnerable, other versions were not tested but might also be vulnerable. | medium | |
| CVE-2026-64964 | ATutor generates predictable email confirmation tokens due to the use of insufficiently random values in the account confirmation functionality. Due to the use of predictable values related to user registration, an attacker who knows or can predict these values can guess valid account activation tokens. This allows an attacker to activate an unconfirmed account without access to the victim's email inbox. Product is no longer actively supported and the vulnerabilities have not been fixed. Only version 2.2.4 was tested and confirmed as vulnerable, other versions were not tested but might also be vulnerable. | medium | |
| CVE-2026-64968 | ATutor is vulnerable to Server-Side request forgery in import functionalities. An authenticated administrator can make the server request arbitrary internal HTTP endpoints, cloud metadata services, or local files via file:// if the PHP environment permits URL wrappers. Product is no longer actively supported and the vulnerabilities have not been fixed. Only version 2.2.4 was tested and confirmed as vulnerable, other versions were not tested but might also be vulnerable. | medium | |
| CVE-2026-75820 | GNU Aspell contains an integer truncation vulnerability in the WritableDict::add() function in modules/speller/default/writable.cpp. When loading a personal wordlist, the word length is stored as a single byte, causing truncation for words whose length is a multiple of 256. This leads to heap corruption. An attacker can exploit this by convincing a user to run aspell with a crafted personal wordlist containing such a word, resulting in denial of service. This issue was fixed in commit 782ce94e4dc71eaec4ee1bd945eb3b9c47c5387d which will be released in version 0.60.8.3. | low | |
| CVE-2026-75818 | GNU Aspell prezip-bin contains a heap-based buffer overflow vulnerability in the decompressor in prog/prezip.c. The decompressor does not properly check buffer space, so a crafted compressed file can cause out-of-bounds read and write operations on the heap. An attacker who convinces a user to process a malicious compressed file with prezip-bin can trigger memory corruption, leading to a processs crash. This issue was fixed in commit 15b188437f9e0192d4ac4472ad66a4e2f62a782f which will be released in version 0.60.8.3. | low | |
| CVE-2026-6253 | curl might erroneously pass on credentials for a first proxy to a second proxy. This can happen when the following conditions are true: 1. curl is setup to use specific different proxies for different URL schemes 2. the first proxy needs credentials 3. the second proxy uses no credentials 4. while using the first proxy (using say `http://`), curl is asked to follow a redirect to a URL using another scheme (say `https://`), accessed using a second, different, proxy | medium | |
| CVE-2026-24206 | NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause an authentication bypass. A successful exploit of this vulnerability might lead to escalation of privileges, denial of service, or information disclosure. | critical | |
| CVE-2026-24207 | NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause an authentication bypass. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, or information disclosure. | critical | |
| CVE-2026-25710 | The new upstream added a privileged D-Bus helper called plasmaloginauthhelper, which suffers from multiple issues, e.g.aA compromised plasmalogin service account can chown() arbitrary files in the system. | high | |
| CVE-2026-31986 | Use of Hard-coded Cryptographic Key vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 24.09.06. Users are recommended to upgrade to version 24.09.06, which fixes the issue. | critical | |
| CVE-2026-43501 | In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards. | high | |
| CVE-2026-53322 | In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Clean up DMABUFs before disabling function On device shutdown, make vfio_pci_core_close_device() call vfio_pci_dma_buf_cleanup() before the function is disabled via vfio_pci_core_disable(). This ensures that all access via DMABUFs is revoked before the function's BARs become inaccessible. This fixes an issue where, if the function is disabled first, a tiny window exists in which the function's MSE is cleared and yet BARs could still be accessed via the DMABUF. The resources would also be freed and up for grabs by a different driver. | high | |
| CVE-2026-46523 | ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2.23 and 6.9.13-48, a crafted MSL image can trigger a heap-use-after-free. Versions 7.1.2.23 and 6.9.13-48 fix the issue. | high | |
| CVE-2026-49218 | ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-24, a missing check in the DCM decoder could result in an image with invalid dimensions and that could cause crashes in other operation. This issue has been patched in versions 6.9.13-48 and 7.1.2-24. | high | |
| CVE-2026-53460 | ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-50 and 7.1.2-25, a missing check for maximum memory request in AcquireAlignedMemory could trigger an out-of-Memory condition. This issue has been patched in versions 6.9.13-50 and 7.1.2-25. | high | |
| CVE-2026-23883 | FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.21.0, `xf_Pointer_New` frees `cursorPixels` on failure, then `pointer_free` calls `xf_Pointer_Free` and frees it again, triggering ASan UAF. A malicious server can trigger a client‑side use after free, causing a crash (DoS) and potential heap corruption with code‑execution risk depending on allocator behavior and surrounding heap layout. Version 3.21.0 contains a patch for the issue. | high | |
| CVE-2026-33891 | Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, a Denial of Service (DoS) vulnerability exists in the node-forge library due to an infinite loop in the BigInteger.modInverse() function (inherited from the bundled jsbn library). When modInverse() is called with a zero value as input, the internal Extended Euclidean Algorithm enters an unreachable exit condition, causing the process to hang indefinitely and consume 100% CPU. Version 1.4.0 patches the issue. | high | |
| CVE-2026-42880 | Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From versions 3.2.0 to before 3.2.11 and 3.3.0 to before 3.3.9, there is a missing authorization and data-masking gap in Argo CD's ServerSideDiff endpoint that allows an attacker with read-only access to extract plaintext Kubernetes Secret data from etcd via the Kubernetes API server's Server-Side Apply dry-run mechanism. This issue has been patched in versions 3.2.11 and 3.3.9. | high | |
| CVE-2026-0038 | In multiple functions of mem_protect.c, there is a possible way to execute arbitrary code due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | high | |
| CVE-2026-8450 | HTTP::Daemon versions before 6.17 for Perl allow OS command injection via send_file(). send_file() opens its string argument with Perl's 2-arg open(). The 2-arg form interprets magic prefixes: '| cmd' and 'cmd |' open a pipe to a subprocess, '> path' and '>> path' open the path for write or append. Untrusted input passed to send_file() can run OS commands at the daemon process UID. The read-pipe form ('cmd |') also leaks subprocess stdout into the HTTP response body. The write-mode forms can create or truncate files at attacker chosen paths. | high | |
| CVE-2026-18982 | A flaw was found in the RHOAI training-operator. This vulnerability allows a user with standard edit or admin roles in any Kubernetes namespace to escalate their privileges. Through the creation of training jobs, an attacker can impersonate service accounts, access the host filesystem, and potentially execute arbitrary code remotely. This issue arises from the aggregation of training job permissions onto native Kubernetes edit and admin ClusterRoles, coupled with unrestricted PodTemplateSpec passthrough. | high | |
| CVE-2026-20245 | A vulnerability in the CLI of Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an authenticated, local attacker to execute arbitrary commands as root by supplying a crafted file to the affected system. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by uploading a crafted file to the affected system. A successful exploit could allow the attacker to perform command injection attacks on an affected system and elevate their privileges as the root user. To exploit this vulnerability, the attacker must have netadmin privileges on the affected system. This would require valid credentials or exploitation of or . Cisco is not aware of successful exploitation by other methods. Cisco has observed limited cases where the exploitation of this bug resulted in a configuration change pushed to edge devices. Cisco recommends that customers upgrade to the fixed software that is documented in the that was published on May 14, 2026, and verify the configuration of the edge devices. | high | |
| CVE-2026-20635 | The issue was addressed with improved memory handling. This issue is fixed in Safari 26.3, iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. Processing maliciously crafted web content may lead to an unexpected process crash. | high | |
| CVE-2026-4324 | A flaw was found in the Katello plugin for Red Hat Satellite. This vulnerability, caused by improper sanitization of user-provided input, allows a remote attacker to inject arbitrary SQL commands into the sort_by parameter of the /api/hosts/bootc_images API endpoint. This can lead to a Denial of Service (DoS) by triggering database errors, and potentially enable Boolean-based Blind SQL injection, which could allow an attacker to extract sensitive information from the database. | medium | |
| CVE-2026-12383 | A flaw was found in the Event-Driven Ansible (EDA) server. The ExternalEventStreamViewSet uses permissive access controls (permission_classes=[AllowAny], authentication_classes=[]) and relies solely on the Subject HTTP header value for mTLS authentication without verifying that the header originated from a trusted proxy. Additionally, the expected certificate Distinguished Name is leaked in the 403 error response body. An attacker who can reach the EDA API endpoint with a spoofed Subject header can inject arbitrary events into mTLS-protected event streams, triggering downstream automation actions. | high | |
| CVE-2026-72694 | A flaw was found in MRTG. When the MRTG daemon is started as a root user and subsequently drops privileges, a local, low-privileged attacker can exploit a symbolic link (symlink) following vulnerability. By influencing or pre-placing a symlink in the process ID (PID) file path, the attacker can trick the root process into changing the ownership of an arbitrary existing file to the daemon user. This can lead to local privilege escalation, allowing unauthorized access to or modification of sensitive files. | high | |
| CVE-2026-78701 | A flaw was found in 389-ds-base. A remote, authenticated attacker could exploit a vulnerability in the Simple Authentication and Security Layer (SASL) UNBIND process. By sending a specially crafted request, the attacker can cause a connection to stall, leading to resource exhaustion and a Denial of Service (DoS) for the server. | medium | |
| CVE-2026-21863 | Valkey is a distributed key-value database. Prior to versions 9.0.2, 8.1.6, 8.0.7, and 7.2.12, a malicious actor with access to the Valkey clusterbus port can send an invalid packet that may cause an out bound read, which might result in the system crashing. The Valkey clusterbus packet processing code does not validate that a clusterbus ping extension packet is located within buffer of the clusterbus packet before attempting to read it. Versions 9.0.2, 8.1.6, 8.0.7, and 7.2.12 fix the issue. As an additional mitigation, don't expose the cluster bus connection directly to end users, and protect the connection with its own network ACLs. | high | |
| CVE-2026-33218 | NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a client which can connect to the leafnode port can crash the nats-server with a certain malformed message pre-authentication. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable leafnode support if not needed or restrict network connections to the leafnode port, if plausible without compromising the service offered. | high | |
| CVE-2026-3608 | Sending a maliciously crafted message to the kea-ctrl-agent, kea-dhcp-ddns, kea-dhcp4, or kea-dhcp6 daemons over any configured API socket or HA listener can cause the receiving daemon to exit with a stack overflow error. This issue affects Kea versions 2.6.0 through 2.6.4 and 3.0.0 through 3.0.2. | high | |
| CVE-2026-27889 | NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.2.0 and prior to versions 2.11.14 and 2.12.5, a missing sanity check on a WebSockets frame could trigger a server panic in the nats-server. This happens before authentication, and so is exposed to anyone who can connect to the websockets port. Versions 2.11.14 and 2.12.5 contains a fix. A workaround is available. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points. If one is able to do so, a defense in depth of restricting either of these will mitigate the attack. | high | |
| CVE-2026-24289 | Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. | high | |
| CVE-2026-5284 | Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) | high | |
| CVE-2026-7246 | This CVE record was assigned not following CNA/CVE rules and is not considered a valid vulnerability by the Pallets Click project. The original CVE record description is preserved below: Pallets Click, versions 8.3.2 and below, contain a command injection vulnerability in the click.edit() function, allowing attackers to pass arbitrary OS commands from an unprivileged account. | high | |
| CVE-2026-1462 | A vulnerability in the `TFSMLayer` class of the `keras` package, version 3.13.0, allows attacker-controlled TensorFlow SavedModels to be loaded during deserialization of `.keras` models, even when `safe_mode=True`. This bypasses the security guarantees of `safe_mode` and enables arbitrary attacker-controlled code execution during model inference under the victim's privileges. The issue arises due to the unconditional loading of external SavedModels, serialization of attacker-controlled file paths, and the lack of validation in the `from_config()` method. | high | |
