| CVE-2026-0748 | In the Drupal 7 Internationalization (i18n) module, the i18n_node submodule allows a user with both "Translate content" and "Administer content translations" permissions to view and attach unpublished nodes via the translation UI and its autocomplete widget. This bypasses intended access controls and discloses unpublished node titles and IDs. Exploit affects versions 7.x-1.0 up to and including 7.x-1.35. | medium | 2026-04-01 |
| CVE-2025-12805 | A flaw was found in Red Hat OpenShift AI (RHOAI) llama-stack-operator. This vulnerability allows unauthorized access to Llama Stack services deployed in other namespaces via direct network requests, because no NetworkPolicy restricts access to the llama-stack service endpoint. As a result, a user in one namespace can access another user’s Llama Stack instance and potentially view or manipulate sensitive data. | high | 2026-03-30 |
| CVE-2026-4933 | Incorrect Authorization vulnerability in Drupal Unpublished Node Permissions allows Forceful Browsing.This issue affects Unpublished Node Permissions: from 0.0.0 before 1.7.0. | high | 2026-04-01 |
| CVE-2026-4393 | Cross-Site Request Forgery (CSRF) vulnerability in Drupal Automated Logout allows Cross Site Request Forgery.This issue affects Automated Logout: from 0.0.0 before 1.7.0, from 2.0.0 before 2.0.2. | medium | 2026-04-01 |
| CVE-2026-3622 | The vulnerability exists in the UPnP component of TL-WR841N v14, where improper input validation leads to an out-of-bounds read, potentially causing a crash of the UPnP service. Successful exploitation can cause the UPnP service to crash, resulting in a Denial-of-Service condition. This vulnerability affects TL-WR841N v14 < EN_0.9.1 4.19 Build 260303 Rel.42399n (V14_260303) and < US_0.9.1.4.19 Build 260312 Rel. 49108n (V14_0304). | high | 2026-03-31 |
| CVE-2026-3573 | Incorrect Authorization vulnerability in Drupal AI (Artificial Intelligence) allows Resource Injection.This issue affects AI (Artificial Intelligence): from 0.0.0 before 1.1.11, from 1.2.0 before 1.2.12. | high | 2026-03-31 |
| CVE-2026-3532 | Improper Handling of Case Sensitivity vulnerability in Drupal OpenID Connect / OAuth client allows Privilege Escalation.This issue affects OpenID Connect / OAuth client: from 0.0.0 before 1.5.0. | medium | 2026-04-01 |
| CVE-2026-3531 | Authentication Bypass Using an Alternate Path or Channel vulnerability in Drupal OpenID Connect / OAuth client allows Authentication Bypass.This issue affects OpenID Connect / OAuth client: from 0.0.0 before 1.5.0. | medium | 2026-04-01 |
| CVE-2026-3530 | Server-Side Request Forgery (SSRF) vulnerability in Drupal OpenID Connect / OAuth client allows Server Side Request Forgery.This issue affects OpenID Connect / OAuth client: from 0.0.0 before 1.5.0. | medium | 2026-04-01 |
| CVE-2026-3529 | Improper Neutralization of Input During Web Page Generation ("Cross-site Scripting") vulnerability in Drupal Google Analytics GA4 allows Cross-Site Scripting (XSS).This issue affects Google Analytics GA4: from 0.0.0 before 1.1.14. | medium | 2026-03-31 |
| CVE-2026-3528 | Improper Neutralization of Input During Web Page Generation ("Cross-site Scripting") vulnerability in Drupal Calculation Fields allows Cross-Site Scripting (XSS).This issue affects Calculation Fields: from 0.0.0 before 1.0.4. | medium | 2026-04-01 |
| CVE-2026-3527 | Missing Authentication for Critical Function vulnerability in Drupal AJAX Dashboard allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects AJAX Dashboard: from 0.0.0 before 3.1.0. | medium | 2026-03-31 |
| CVE-2026-3526 | Incorrect Authorization vulnerability in Drupal File Access Fix (deprecated) allows Forceful Browsing.This issue affects File Access Fix (deprecated): from 0.0.0 before 1.2.0. | medium | 2026-03-31 |
| CVE-2026-3525 | Incorrect Authorization vulnerability in Drupal File Access Fix (deprecated) allows Forceful Browsing.This issue affects File Access Fix (deprecated): from 0.0.0 before 1.2.0. | medium | 2026-03-31 |
| CVE-2026-33742 | Invoice Ninja is a source-available invoice, quote, project and time-tracking app built with Laravel. Product notes fields in Invoice Ninja v5.13.0 allow raw HTML via Markdown rendering, enabling stored XSS. The Markdown parser output was not sanitized with `purify::clean()` before being included in invoice templates. This is fixed in v5.13.4 by the vendor by adding `purify::clean()` to sanitize Markdown output. | medium | 2026-03-30 |
| CVE-2026-33738 | Lychee is a free, open-source photo-management tool. Prior to version 7.5.3, the photo `description` field is stored without HTML sanitization and rendered using `{!! $item->summary !!}` (Blade unescaped output) in the RSS, Atom, and JSON feed templates. The `/feed` endpoint is publicly accessible without authentication, allowing any RSS reader to execute attacker-controlled JavaScript. Version 7.5.3 fixes the issue. | medium | 2026-03-30 |
| CVE-2026-33645 | Fireshare facilitates self-hosted media and link sharing. In version 1.5.1, an authenticated path traversal vulnerability in Fireshare’s chunked upload endpoint allows an attacker to write arbitrary files outside the intended upload directory. The `checkSum` multipart field is used directly in filesystem path construction without sanitization or containment checks. This enables unauthorized file writes to attacker-chosen paths writable by the Fireshare process (e.g., container `/tmp`), violating integrity and potentially enabling follow-on attacks depending on deployment. Version 1.5.2 fixes the issue. | high | 2026-03-30 |
| CVE-2026-33644 | Lychee is a free, open-source photo-management tool. Prior to version 7.5.2, the SSRF protection in `PhotoUrlRule.php` can be bypassed using DNS rebinding. The IP validation check (line 86-89) only activates when the hostname is an IP address. When a domain name is used, `filter_var($host, FILTER_VALIDATE_IP)` returns `false`, skipping the entire check. Version 7.5.2 patches the issue. | low | 2026-03-30 |
| CVE-2026-33640 | Outline is a service that allows for collaborative documentation. Outline implements an Email OTP login flow for users not associated with an Identity Provider. Starting in version 0.86.0 and prior to version 1.6.0, Outline does not invalidate OTP codes based on amount or frequency of invalid submissions, rather it relies on the rate limiter to restrict attempts. Consequently, identified bypasses in the rate limiter permit unrestricted OTP code submissions within the codes lifetime. This allows attackers to perform brute force attacks which enable account takeover. Version 1.6.0 fixes the issue. | critical | 2026-03-31 |
| CVE-2026-33638 | Ech0 is an open-source, self-hosted publishing platform for personal idea sharing. Prior to version 4.2.0, `GET /api/allusers` is mounted as a public endpoint and returns user records without authentication. This allows remote unauthenticated user enumeration and exposure of user profile metadata. A fix is available in v4.2.0. | medium | 2026-03-31 |
| CVE-2026-33635 | iCalendar is a Ruby library for dealing with iCalendar files in the iCalendar format defined by RFC-5545. Starting in version 2.0.0 and prior to version 2.12.2, .ics serialization does not properly sanitize URI property values, enabling ICS injection through attacker-controlled input, adding arbitrary calendar lines to the output. `Icalendar::Values::Uri` falls back to the raw input string when `URI.parse` fails and later serializes it with `value.to_s` without removing or escaping `\r` or `\n` characters. That value is embedded directly into the final ICS line by the normal serializer, so a payload containing CRLF can terminate the original property and create a new ICS property or component. (It looks like you can inject via url, source, image, organizer, attach, attendee, conference, tzurl because of this). Applications that generate `.ics` files from partially untrusted metadata are impacted. As a result, downstream calendar clients or importers may process attacker-supplied content as if it were legitimate event data, such as added attendees, modified URLs, alarms, or other calendar fields. Version 2.12.2 contains a patch for the issue. | medium | 2026-04-10 |
| CVE-2026-33628 | Invoice Ninja is a source-available invoice, quote, project and time-tracking app built with Laravel. Invoice line item descriptions in Invoice Ninja v5.13.0 bypass the XSS denylist filter, allowing stored XSS payloads to execute when invoices are rendered in the PDF preview or client portal. The line item description field was not passed through `purify::clean()` before rendering. This is fixed in v5.13.4 by the vendor by adding `purify::clean()` to sanitize line item descriptions. | medium | 2026-03-30 |
| CVE-2026-33623 | PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab `v0.8.4` contains a Windows-only command injection issue in the orphaned Chrome cleanup path. When an instance is stopped, the Windows cleanup routine builds a PowerShell `-Command` string using a `needle` derived from the profile path. In `v0.8.4`, that string interpolation escapes backslashes but does not safely neutralize other PowerShell metacharacters. If an attacker can launch an instance using a crafted profile name and then trigger the cleanup path, they may be able to execute arbitrary PowerShell commands on the Windows host in the security context of the PinchTab process user. This is not an unauthenticated internet RCE. It requires authenticated, administrative-equivalent API access to instance lifecycle endpoints, and the resulting command execution inherits the permissions of the PinchTab OS user rather than bypassing host privilege boundaries. Version 0.8.5 contains a patch for the issue. | high | 2026-03-31 |
| CVE-2026-33622 | PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab `v0.8.3` through `v0.8.5` allow arbitrary JavaScript execution through `POST /wait` and `POST /tabs/{id}/wait` when the request uses `fn` mode, even if `security.allowEvaluate` is disabled. `POST /evaluate` correctly enforces the `security.allowEvaluate` guard, which is disabled by default. However, in the affected releases, `POST /wait` accepted a user-controlled `fn` expression, embedded it directly into executable JavaScript, and evaluated it in the browser context without checking the same policy. This is a security-policy bypass rather than a separate authentication bypass. Exploitation still requires authenticated API access, but a caller with the server token can execute arbitrary JavaScript in a tab context even when the operator explicitly disabled JavaScript evaluation. The current worktree fixes this by applying the same policy boundary to `fn` mode in `/wait` that already exists on `/evaluate`, while preserving the non-code wait modes. As of time of publication, a patched version is not yet available. | medium | 2026-03-31 |
| CVE-2026-33621 | PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab `v0.7.7` through `v0.8.4` contain incomplete request-throttling protections for auth-checkable endpoints. In `v0.7.7` through `v0.8.3`, a fully implemented `RateLimitMiddleware` existed in `internal/handlers/middleware.go` but was not inserted into the production HTTP handler chain, so requests were not subject to the intended per-IP throttle. In the same pre-`v0.8.4` range, the original limiter also keyed clients using `X-Forwarded-For`, which would have allowed client-controlled header spoofing if the middleware had been enabled. `v0.8.4` addressed those two issues by wiring the limiter into the live handler chain and switching the key to the immediate peer IP, but it still exempted `/health` and `/metrics` from rate limiting even though `/health` remained an auth-checkable endpoint when a token was configured. This issue weakens defense in depth for deployments where an attacker can reach the API, especially if a weak human-chosen token is used. It is not a direct authentication bypass or token disclosure issue by itself. PinchTab is documented as local-first by default and uses `127.0.0.1` plus a generated random token in the recommended setup. PinchTab's default deployment model is a local-first, user-controlled environment between the user and their agents; wider exposure is an intentional operator choice. This lowers practical risk in the default configuration, even though it does not by itself change the intrinsic base characteristics of the bug. This was fully addressed in `v0.8.5` by applying `RateLimitMiddleware` in the production handler chain, deriving the client address from the immediate peer IP instead of trusting forwarded headers by default, and removing the `/health` and `/metrics` exemption so auth-checkable endpoints are throttled as well. | medium | 2026-03-30 |
| CVE-2026-33620 | PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab `v0.7.8` through `v0.8.3` accepted the API token from a `token` URL query parameter in addition to the `Authorization` header. When a valid API credential is sent in the URL, it can be exposed through request URIs recorded by intermediaries or client-side tooling, such as reverse proxy access logs, browser history, shell history, clipboard history, and tracing systems that capture full URLs. This issue is an unsafe credential transport pattern rather than a direct authentication bypass. It only affects deployments where a token is configured and a client actually uses the query-parameter form. PinchTab's security guidance already recommended `Authorization: Bearer <token>`, but `v0.8.3` still accepted `?token=` and included first-party flows that generated and consumed URLs containing the token. This was addressed in v0.8.4 by removing query-string token authentication and requiring safer header- or session-based authentication flows. | medium | 2026-03-31 |
| CVE-2026-33619 | PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab v0.8.3 contains a server-side request forgery issue in the optional scheduler's webhook delivery path. When a task is submitted to `POST /tasks` with a user-controlled `callbackUrl`, the v0.8.3 scheduler sends an outbound HTTP `POST` to that URL when the task reaches a terminal state. In that release, the webhook path validated only the URL scheme and did not reject loopback, private, link-local, or other non-public destinations. Because the v0.8.3 implementation also used the default HTTP client behavior, redirects were followed and the destination was not pinned to validated IPs. This allowed blind SSRF from the PinchTab server to attacker-chosen HTTP(S) targets reachable from the server. This issue is narrower than a general unauthenticated internet-facing SSRF. The scheduler is optional and off by default, and in token-protected deployments the attacker must already be able to submit tasks using the server's master API token. In PinchTab's intended deployment model, that token represents administrative control rather than a low-privilege role. Tokenless deployments lower the barrier further, but that is a separate insecure configuration state rather than impact created by the webhook bug itself. PinchTab's default deployment model is local-first and user-controlled, with loopback bind and token-based access in the recommended setup. That lowers practical risk in default use, even though it does not remove the underlying webhook issue when the scheduler is enabled and reachable. This was addressed in v0.8.4 by validating callback targets before dispatch, rejecting non-public IP ranges, pinning delivery to validated IPs, disabling redirect following, and validating `callbackUrl` during task submission. | medium | 2026-03-30 |
| CVE-2026-33545 | MobSF is a mobile application security testing tool used. Prior to version 4.4.6, MobSF's `read_sqlite()` function in `mobsf/MobSF/utils.py` (lines 542-566) uses Python string formatting (`%`) to construct SQL queries with table names read from a SQLite database's `sqlite_master` table. When a security analyst uses MobSF to analyze a malicious mobile application containing a crafted SQLite database, attacker-controlled table names are interpolated directly into SQL queries without parameterization or escaping. This allows an attacker to cause denial of service and achieve SQL injection. Version 4.4.6 patches the issue. | medium | 2026-04-03 |
| CVE-2026-33541 | TSPortal is the WikiTide Foundation’s in-house platform used by the Trust and Safety team to manage reports, investigations, appeals, and transparency work. Prior to version 34, a flaw in TSPortal allowed attackers to create arbitrary user records in the database by abusing validation logic. While validation correctly rejected invalid usernames, a side effect within a validation rule caused user records to be created regardless of whether the request succeeded. This could be exploited to cause uncontrolled database growth, leading to a potential denial of service (DoS). Version 34 contains a fix for the issue. | medium | 2026-04-03 |
| CVE-2026-33537 | Lychee is a free, open-source photo-management tool. The patch introduced for GHSA-cpgw-wgf3-xc6v (SSRF via `Photo::fromUrl`) contains an incomplete IP validation check that fails to block loopback addresses and link-local addresses. Prior to version 7.5.1, an authenticated user can still reach internal services using direct IP addresses, bypassing all four protection configuration settings even when they are set to their secure defaults. Version 7.5.1 contains a fix for the issue. | medium | 2026-04-01 |
| CVE-2026-33375 | The Grafana MSSQL data source plugin contains a logic flaw that allows a low-privileged user (Viewer) to bypass API restrictions and trigger a catastrophic Out-Of-Memory (OOM) memory exhaustion, crashing the host container. | medium | 2026-03-31 |
| CVE-2026-2272 | A flaw was found in GIMP. An integer overflow vulnerability exists when processing ICO image files, specifically in the `ico_read_info` and `ico_read_icon` functions. This issue arises because a size calculation for image buffers can wrap around due to a 32-bit integer evaluation, allowing oversized image headers to bypass security checks. A remote attacker could exploit this by providing a specially crafted ICO file, leading to a buffer overflow and memory corruption, which may result in an application level denial of service. | medium | 2026-04-03 |
| CVE-2026-2271 | A flaw was found in GIMP's PSP (Paint Shop Pro) file parser. A remote attacker could exploit an integer overflow vulnerability in the read_creator_block() function by providing a specially crafted PSP image file. This vulnerability occurs when a 32-bit length value from the file is used for memory allocation without proper validation, leading to a heap overflow and an out-of-bounds write. Successful exploitation could result in an application level denial of service. | low | 2026-03-30 |
| CVE-2026-2239 | A flaw was found in GIMP. Heap-buffer-overflow vulnerability exists in the fread_pascal_string function when processing a specially crafted PSD (Photoshop Document) file. This occurs because the buffer allocated for a Pascal string is not properly null-terminated, leading to an out-of-bounds read when strlen() is subsequently called. Successfully exploiting this vulnerability can cause the application to crash, resulting in an application level Denial of Service. | medium | 2026-04-03 |
| CVE-2026-2100 | A flaw was found in p11-kit. A remote attacker could exploit this vulnerability by calling the C_DeriveKey function on a remote token with specific IBM kyber or IBM btc derive mechanism parameters set to NULL. This could lead to the RPC-client attempting to return an uninitialized value, potentially resulting in a NULL dereference or undefined behavior. This issue may cause an application level denial of service or other unpredictable system states. | medium | 2026-03-30 |
| CVE-2026-21724 | A vulnerability has been discovered in Grafana OSS where an authorization bypass in the provisioning contact points API allows users with Editor role to modify protected webhook URLs without the required alert.notifications.receivers.protected:write permission. | medium | 2026-03-30 |
| CVE-2026-0968 | A flaw was found in libssh in which a malicious SFTP (SSH File Transfer Protocol) server can exploit this by sending a malformed 'longname' field within an `SSH_FXP_NAME` message during a file listing operation. This missing null check can lead to reading beyond allocated memory on the heap. This can cause unexpected behavior or lead to a denial of service (DoS) due to application crashes. | critical | 2026-04-03 |
| CVE-2026-0967 | A flaw was found in libssh. A remote attacker, by controlling client configuration files or known_hosts files, could craft specific hostnames that when processed by the `match_pattern()` function can lead to inefficient regular expression backtracking. This can cause timeouts and resource exhaustion, resulting in a Denial of Service (DoS) for the client. | medium | 2026-04-02 |
| CVE-2026-0966 | The API function `ssh_get_hexa()` is vulnerable, when 0-lenght input is provided to this function. This function is used internally in `ssh_get_fingerprint_hash()` and `ssh_print_hexa()` (deprecated), which is vulnerable to the same input (length is provided by the calling application). The function is also used internally in the gssapi code for logging the OIDs received by the server during GSSAPI authentication. This could be triggered remotely, when the server allows GSSAPI authentication and logging verbosity is set at least to SSH_LOG_PACKET (3). This could cause self-DoS of the per-connection daemon process. | medium | 2026-03-30 |
| CVE-2026-0965 | A flaw was found in libssh where it can attempt to open arbitrary files during configuration parsing. A local attacker can exploit this by providing a malicious configuration file or when the system is misconfigured. This vulnerability could lead to a Denial of Service (DoS) by causing the system to try and access dangerous files, such as block devices or large system files, which can disrupt normal operations. | low | 2026-04-02 |
| CVE-2026-0964 | A malicious SCP server can send unexpected paths that could make the client application override local files outside of working directory. This could be misused to create malicious executable or configuration files and make the user execute them under specific consequences. This is the same issue as in OpenSSH, tracked as CVE-2019-6111. | medium | 2026-03-30 |
| CVE-2026-33632 | ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. Prior to version 4.2.4, two file operation event types — ES_EVENT_TYPE_AUTH_EXCHANGEDATA and ES_EVENT_TYPE_AUTH_CLONE — were not intercepted by ClearanceKit's opfilter system extension, allowing local processes to bypass file access policies. Commit 6181c4a patches the vulnerability by subscribing to both event types and routing them through the existing policy evaluator. Users must upgrade to v4.2.4 or later and reactivate the system extension. | high | 2026-03-30 |
| CVE-2026-33631 | ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. In versions on the 4.1 branch and earlier, the opfilter Endpoint Security system extension enforced file access policy exclusively by intercepting ES_EVENT_TYPE_AUTH_OPEN events. Seven additional file operation event types were not intercepted, allowing any locally running process to bypass the configured FAA policy without triggering a denial. Commit a3d1733 adds subscriptions for all seven event types and routes them through the existing FAA policy evaluator. AUTH_RENAME and AUTH_UNLINK additionally preserve XProtect change detection: events on the XProtect path are allowed and trigger the existing onXProtectChanged callback rather than being evaluated against user policy. All versions on the 4.2 branch contain the fix. No known workarounds are available. | high | 2026-03-30 |
| CVE-2026-33536 | ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-18 and 6.9.13-43, due to an incorrect return value on certain platforms a pointer is incremented past the end of a buffer that is on the stack and that could result in an out of bounds write. Versions 7.1.2-18 and 6.9.13-43 patch the issue. | medium | 2026-04-02 |
| CVE-2026-33535 | ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-18 and 6.9.13-43, an out-of-bounds write of a zero byte exists in the X11 `display` interaction path that could lead to a crash. Versions 7.1.2-18 and 6.9.13-43 patch the issue. | medium | 2026-04-02 |
| CVE-2026-33532 | `yaml` is a YAML parser and serialiser for JavaScript. Parsing a YAML document with a version of `yaml` on the 1.x branch prior to 1.10.3 or on the 2.x branch prior to 2.8.3 may throw a RangeError due to a stack overflow. The node resolution/composition phase uses recursive function calls without a depth bound. An attacker who can supply YAML for parsing can trigger a `RangeError: Maximum call stack size exceeded` with a small payload (~2–10 KB). The `RangeError` is not a `YAMLParseError`, so applications that only catch YAML-specific errors will encounter an unexpected exception type. Depending on the host application's exception handling, this can fail requests or terminate the Node.js process. Flow sequences allow deep nesting with minimal bytes (2 bytes per level: one `[` and one `]`). On the default Node.js stack, approximately 1,000–5,000 levels of nesting (2–10 KB input) exhaust the call stack. The exact threshold is environment-dependent (Node.js version, stack size, call stack depth at invocation). Note: the library's `Parser` (CST phase) uses a stack-based iterative approach and is not affected. Only the compose/resolve phase uses actual call-stack recursion. All three public parsing APIs are affected: `YAML.parse()`, `YAML.parseDocument()`, and `YAML.parseAllDocuments()`. Versions 1.10.3 and 2.8.3 contain a patch. | medium | 2026-04-02 |
| CVE-2026-33531 | InvenTree is an Open Source Inventory Management System. Prior to version 1.2.6, a path traversal vulnerability in the report template engine allows a staff-level user to read arbitrary files from the server filesystem via crafted template tags. Affected functions: `encode_svg_image()`, `asset()`, and `uploaded_image()` in `src/backend/InvenTree/report/templatetags/report.py`. This requires staff access (to upload / edit templates with maliciously crafted tags). If the InvenTree installation is configured with high access privileges on the host system, this path traversal may allow file access outside of the InvenTree source directory. This issue is patched in version 1.2.6, and 1.3.0 (or above). Users should update to the patched versions. No known workarounds are available. | high | 2026-04-01 |
| CVE-2026-33530 | InvenTree is an Open Source Inventory Management System. Prior to version 1.2.6, certain API endpoints associated with bulk data operations can be hijacked to exfiltrate sensitive information from the database. The bulk operation API endpoints (e.g. `/api/part/`, `/api/stock/`, `/api/order/so/allocation/`, and others) accept a filters parameter that is passed directly to Django's ORM queryset.filter(**filters) without any field allowlisting. This enables any authenticated user to traverse model relationships using Django's __ lookup syntax and perform blind boolean-based data extraction. This issue is patched in version 1.2.6, and 1.3.0 (or above). Users should update to the patched versions. No known workarounds are available. | medium | 2026-04-01 |
| CVE-2026-33529 | Zoraxy is a general purpose HTTP reverse proxy and forwarding tool. Prior to version 3.3.2, an authenticated path traversal vulnerability in the configuration import endpoint allows an authenticated user to write arbitrary files outside the config directory, which can lead to RCE by creating a plugin. Version 3.3.2 patches the issue. | high | 2026-04-02 |
| CVE-2026-33528 | GoDoxy is a reverse proxy and container orchestrator for self-hosters. Prior to version 0.27.5, the file content API endpoint at `/api/v1/file/content` is vulnerable to path traversal. The `filename` query parameter is passed directly to `path.Join(common.ConfigBasePath, filename)` where `ConfigBasePath = "config"` (a relative path). No sanitization or validation is applied beyond checking that the field is non-empty (`binding:"required"`). An authenticated attacker can use `../` sequences to read or write files outside the intended `config/` directory, including TLS private keys, OAuth refresh tokens, and any file accessible to the container's UID. Version 0.27.5 fixes the issue. | medium | 2026-04-02 |
