CVE-2025-38690 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: prevent infinite recursion If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to using a bounce buffer. However the bounce buffer here is allocated on the stack, and the only alignment requirement here is that it's naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce buffer is also misaligned we then recurse back into the function again, however the new bounce buffer might also not be aligned, and might never be until we eventually blow through the stack, as we keep recursing. Instead of using the stack use kmalloc, which should respect the power-of-two alignment request here. Fixes a kernel panic when triggering this path through eudebug. v2 (Stuart): - Add build bug check for power-of-two restriction - s/EINVAL/ENOMEM/ (cherry picked from commit 38b34e928a08ba594c4bbf7118aa3aadacd62fff) | medium |
CVE-2025-38689 | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Fix NULL dereference in avx512_status() Problem ------- With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status causes a warning and a NULL pointer dereference. This is because the AVX-512 timestamp code uses x86_task_fpu() but doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function for kernel threads (PF_KTHREAD specifically), making it return NULL. The point of the warning was to ensure that kernel threads only access task->fpu after going through kernel_fpu_begin()/_end(). Note: all kernel tasks exposed in /proc have a valid task->fpu. Solution -------- One option is to silence the warning and check for NULL from x86_task_fpu(). However, that warning is fairly fresh and seems like a defense against misuse of the FPU state in kernel threads. Instead, stop outputting AVX-512_elapsed_ms for kernel threads altogether. The data was garbage anyway because avx512_timestamp is only updated for user threads, not kernel threads. If anyone ever wants to track kernel thread AVX-512 use, they can come back later and do it properly, separate from this bug fix. [ dhansen: mostly rewrite changelog ] | medium |
CVE-2025-38688 | In the Linux kernel, the following vulnerability has been resolved: iommufd: Prevent ALIGN() overflow When allocating IOVA the candidate range gets aligned to the target alignment. If the range is close to ULONG_MAX then the ALIGN() can wrap resulting in a corrupted iova. Open code the ALIGN() using get_add_overflow() to prevent this. This simplifies the checks as we don't need to check for length earlier either. Consolidate the two copies of this code under a single helper. This bug would allow userspace to create a mapping that overlaps with some other mapping or a reserved range. | high |
CVE-2025-38687 | In the Linux kernel, the following vulnerability has been resolved: comedi: fix race between polling and detaching syzbot reports a use-after-free in comedi in the below link, which is due to comedi gladly removing the allocated async area even though poll requests are still active on the wait_queue_head inside of it. This can cause a use-after-free when the poll entries are later triggered or removed, as the memory for the wait_queue_head has been freed. We need to check there are no tasks queued on any of the subdevices' wait queues before allowing the device to be detached by the `COMEDI_DEVCONFIG` ioctl. Tasks will read-lock `dev->attach_lock` before adding themselves to the subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl handler by write-locking `dev->attach_lock` before checking that all of the subdevices are safe to be deleted. This includes testing for any sleepers on the subdevices' wait queues. It remains locked until the device has been detached. This requires the `comedi_device_detach()` function to be refactored slightly, moving the bulk of it into new function `comedi_device_detach_locked()`. Note that the refactor of `comedi_device_detach()` results in `comedi_device_cancel_all()` now being called while `dev->attach_lock` is write-locked, which wasn't the case previously, but that does not matter. Thanks to Jens Axboe for diagnosing the problem and co-developing this patch. | medium |
CVE-2025-38686 | In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with obtaining a folio and accessing it even though the entry is swp_entry_t. Add the missing check and let split_huge_pmd() handle migration entries. While at it also remove unnecessary folio check. [[email protected]: remove extra folio check, per David] | medium |
CVE-2025-38685 | In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix vmalloc out-of-bounds write in fast_imageblit This issue triggers when a userspace program does an ioctl FBIOPUT_CON2FBMAP by passing console number and frame buffer number. Ideally this maps console to frame buffer and updates the screen if console is visible. As part of mapping it has to do resize of console according to frame buffer info. if this resize fails and returns from vc_do_resize() and continues further. At this point console and new frame buffer are mapped and sets display vars. Despite failure still it continue to proceed updating the screen at later stages where vc_data is related to previous frame buffer and frame buffer info and display vars are mapped to new frame buffer and eventully leading to out-of-bounds write in fast_imageblit(). This bheviour is excepted only when fg_console is equal to requested console which is a visible console and updates screen with invalid struct references in fbcon_putcs(). | high |
CVE-2025-38684 | In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: use old 'nbands' while purging unused classes Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify() after recent changes from Lion [2]. The problem is: in ets_qdisc_change() we purge unused DWRR queues; the value of 'q->nbands' is the new one, and the cleanup should be done with the old one. The problem is here since my first attempts to fix ets_qdisc_change(), but it surfaced again after the recent qdisc len accounting fixes. Fix it purging idle DWRR queues before assigning a new value of 'q->nbands', so that all purge operations find a consistent configuration: - old 'q->nbands' because it's needed by ets_class_find() - old 'q->nstrict' because it's needed by ets_class_is_strict() BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 62 UID: 0 PID: 39457 Comm: tc Kdump: loaded Not tainted 6.12.0-116.el10.x86_64 #1 PREEMPT(voluntary) Hardware name: Dell Inc. PowerEdge R640/06DKY5, BIOS 2.12.2 07/09/2021 RIP: 0010:__list_del_entry_valid_or_report+0x4/0x80 Code: ff 4c 39 c7 0f 84 39 19 8e ff b8 01 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <48> 8b 17 48 8b 4f 08 48 85 d2 0f 84 56 19 8e ff 48 85 c9 0f 84 ab RSP: 0018:ffffba186009f400 EFLAGS: 00010202 RAX: 00000000000000d6 RBX: 0000000000000000 RCX: 0000000000000004 RDX: ffff9f0fa29b69c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffffffc12c2400 R08: 0000000000000008 R09: 0000000000000004 R10: ffffffffffffffff R11: 0000000000000004 R12: 0000000000000000 R13: ffff9f0f8cfe0000 R14: 0000000000100005 R15: 0000000000000000 FS: 00007f2154f37480(0000) GS:ffff9f269c1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001530be001 CR4: 00000000007726f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ets_class_qlen_notify+0x65/0x90 [sch_ets] qdisc_tree_reduce_backlog+0x74/0x110 ets_qdisc_change+0x630/0xa40 [sch_ets] __tc_modify_qdisc.constprop.0+0x216/0x7f0 tc_modify_qdisc+0x7c/0x120 rtnetlink_rcv_msg+0x145/0x3f0 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x245/0x390 netlink_sendmsg+0x21b/0x470 ____sys_sendmsg+0x39d/0x3d0 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x7d/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f2155114084 Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d 25 f0 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 RSP: 002b:00007fff1fd7a988 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000560ec063e5e0 RCX: 00007f2155114084 RDX: 0000000000000000 RSI: 00007fff1fd7a9f0 RDI: 0000000000000003 RBP: 00007fff1fd7aa60 R08: 0000000000000010 R09: 000000000000003f R10: 0000560ee9b3a010 R11: 0000000000000202 R12: 00007fff1fd7aae0 R13: 000000006891ccde R14: 0000560ec063e5e0 R15: 00007fff1fd7aad0 </TASK> [1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/ [2] https://lore.kernel.org/netdev/[email protected]/ | high |
CVE-2025-38683 | In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix panic during namespace deletion with VF The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it. | medium |
CVE-2025-38682 | In the Linux kernel, the following vulnerability has been resolved: i2c: core: Fix double-free of fwnode in i2c_unregister_device() Before commit df6d7277e552 ("i2c: core: Do not dereference fwnode in struct device"), i2c_unregister_device() only called fwnode_handle_put() on of_node-s in the form of calling of_node_put(client->dev.of_node). But after this commit the i2c_client's fwnode now unconditionally gets fwnode_handle_put() on it. When the i2c_client has no primary (ACPI / OF) fwnode but it does have a software fwnode, the software-node will be the primary node and fwnode_handle_put() will put() it. But for the software fwnode device_remove_software_node() will also put() it leading to a double free: [ 82.665598] ------------[ cut here ]------------ [ 82.665609] refcount_t: underflow; use-after-free. [ 82.665808] WARNING: CPU: 3 PID: 1502 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x11 ... [ 82.666830] RIP: 0010:refcount_warn_saturate+0xba/0x110 ... [ 82.666962] <TASK> [ 82.666971] i2c_unregister_device+0x60/0x90 Fix this by not calling fwnode_handle_put() when the primary fwnode is a software-node. | high |
CVE-2025-38681 | In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: take the memory hotplug lock inside ptdump_walk_pgd() Memory hot remove unmaps and tears down various kernel page table regions as required. The ptdump code can race with concurrent modifications of the kernel page tables. When leaf entries are modified concurrently, the dump code may log stale or inconsistent information for a VA range, but this is otherwise not harmful. But when intermediate levels of kernel page table are freed, the dump code will continue to use memory that has been freed and potentially reallocated for another purpose. In such cases, the ptdump code may dereference bogus addresses, leading to a number of potential problems. To avoid the above mentioned race condition, platforms such as arm64, riscv and s390 take memory hotplug lock, while dumping kernel page table via the sysfs interface /sys/kernel/debug/kernel_page_tables. Similar race condition exists while checking for pages that might have been marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pages which in turn calls ptdump_check_wx(). Instead of solving this race condition again, let's just move the memory hotplug lock inside generic ptdump_check_wx() which will benefit both the scenarios. Drop get_online_mems() and put_online_mems() combination from all existing platform ptdump code paths. | medium |
CVE-2025-38680 | In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix 1-byte out-of-bounds read in uvc_parse_format() The buffer length check before calling uvc_parse_format() only ensured that the buffer has at least 3 bytes (buflen > 2), buf the function accesses buffer[3], requiring at least 4 bytes. This can lead to an out-of-bounds read if the buffer has exactly 3 bytes. Fix it by checking that the buffer has at least 4 bytes in uvc_parse_format(). | low |
CVE-2025-38679 | In the Linux kernel, the following vulnerability has been resolved: media: venus: Fix OOB read due to missing payload bound check Currently, The event_seq_changed() handler processes a variable number of properties sent by the firmware. The number of properties is indicated by the firmware and used to iterate over the payload. However, the payload size is not being validated against the actual message length. This can lead to out-of-bounds memory access if the firmware provides a property count that exceeds the data available in the payload. Such a condition can result in kernel crashes or potential information leaks if memory beyond the buffer is accessed. Fix this by properly validating the remaining size of the payload before each property access and updating bounds accordingly as properties are parsed. This ensures that property parsing is safely bounded within the received message buffer and protects against malformed or malicious firmware behavior. | medium |
CVE-2025-23302 | NVIDIA HGX and DGX contain a vulnerability where a misconfiguration of the LS10 could enable an attacker to set an unsafe debug access level. A successful exploit of this vulnerability might lead to denial of service. | medium |
CVE-2025-23301 | NVIDIA HGX and DGX contain a vulnerability where a misconfiguration of the VBIOS could enable an attacker to set an unsafe debug access level. A successful exploit of this vulnerability might lead to denial of service. | medium |
CVE-2025-23262 | NVIDIA ConnectX contains a vulnerability in the management interface, where an attacker with local access could cause incorrect authorization to modify the configuration. A successful exploit of this vulnerability might lead to denial of service, escalation of privileges, information disclosure, and data tampering. | medium |
CVE-2025-23261 | NVIDIA Cumulus Linux and NVOS products contain a vulnerability, where hashed user passwords are not properly suppressed in log files, potentially disclosing information to unauthorized users. | medium |
CVE-2025-23259 | NVIDIA Mellanox DPDK contains a vulnerability in Poll Mode Driver (PMD), where an attacker on a VM in the system might be able to cause information disclosure and denial of service on the network interface. | medium |
CVE-2025-23258 | NVIDIA DOCA contains a vulnerability in the collectx-dpeserver Debian package for arm64 that could allow an attacker with low privileges to escalate privileges. A successful exploit of this vulnerability might lead to escalation of privileges. | high |
CVE-2025-23257 | NVIDIA DOCA contains a vulnerability in the collectx-clxapidev Debian package that could allow an actor with low privileges to escalate privileges. A successful exploit of this vulnerability might lead to escalation of privileges. | high |
CVE-2025-23256 | NVIDIA BlueField contains a vulnerability in the management interface, where an attacker with local access could cause incorrect authorization to modify the configuration. A successful exploit of this vulnerability might lead to denial of service, escalation of privileges, information disclosure, and data tampering. | high |
CVE-2025-8311 | dotCMS versions 24.03.22 and after, identified a Boolean-based blind SQLi vulnerability in the /api/v1/contenttype endpoint. This endpoint uses the sites query parameter, which accepts a comma-separated list of site identifiers or keys. The vulnerability was triggered via the sites parameter, which was directly concatenated into a SQL query without proper sanitization. Exploitation allowed an authenticated attacker with low privileges to extract data from database, perform privilege escalation, or trigger denial-of-service conditions. The vulnerability was verified using tools such as SQLMap and confirmed to allow full database exfiltration and potential denial-of-service conditions via crafted payloads. The vulnerability is fixed in the following versions of dotCMS stack: 25.08.14 / 25.07.10-1v2 LTS / 24.12.27v10 LTS / 24.04.24v21 LTS | critical |
CVE-2025-6785 | Securing externally available CAN wires can easily allow physical access to the CAN bus, allowing possible injection of specially formed CAN messages to control remote start functions of the vehicle. Testing completed on Tesla Model 3 vehicles with software version v11.1 (2023.20.9 ee6de92ddac5). This issue affects Model 3: With software versions from 2023.Xx before 2023.44. | medium |
CVE-2025-2694 | IBM Sterling B2B Integrator 6.0.0.0 through 6.1.2.7_1 and 6.2.0.0 through 6.2.0.4 and IBM Sterling File Gateway 6.0.0.0 through 6.1.2.7_1 and 6.2.0.0 through 6.2.0.4 is vulnerable to cross-site scripting. This vulnerability allows a privileged user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | medium |
CVE-2025-2667 | IBM Sterling B2B Integrator 6.0.0.0 through 6.1.2.7_1 and 6.2.0.0 through 6.2.0.4 and IBM Sterling File Gateway 6.0.0.0 through 6.1.2.7_1 and 6.2.0.0 through 6.2.0.4 could disclose sensitive system information about the server to a privileged user that could aid in further attacks against the system. | medium |
CVE-2025-25048 | IBM Jazz Foundation 7.0.2 through 7.0.2 iFix033, 7.0.3 through 7.0.3 iFix012, and 7.1.0 through 7.1.0 iFix002 could allow an authenticated user to upload files to the system due to improper neutralization of sequences that can resolve to a restricted directory. | medium |
CVE-2024-43184 | IBM Jazz Foundation 7.0.2 through 7.0.2 iFix033, 7.0.3 through 7.0.3 iFix012, and 7.1.0 through 7.1.0 iFix002 is vulnerable to cross-site scripting. This vulnerability allows an unauthenticated attacker to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | medium |
CVE-2025-57263 | An authenticated SQL injection vulnerability in VX Guestbook 1.07 allows attackers with admin access to inject malicious SQL payloads via the "word" POST parameter in the words.php admin panel. | high |
CVE-2025-7388 | It was possible to perform Remote Command Execution (RCE) via Java RMI interface in the OpenEdge AdminServer, allowing authenticated users to inject and execute OS commands under the delegated authority of the AdminServer process. An RMI interface permitted manipulation of a configuration property with inadequate input validation leading to OS command injection. | high |
CVE-2025-7385 | Input from search query parameter in GOV CMS is not sanitized properly, leading to a Blind SQL injection vulnerability, which might be exploited by an unauthenticated remote attacker. Versions 4.0 and above are not affected. | critical |
CVE-2025-41063 | A vulnerability has been discovered in version 4.0.5 of appRain CMF, consisting of an authenticated reflected XSS due to a lack of proper validation of user input, through the 's' parameter in /apprain/developer/debug-log/db. | medium |
CVE-2025-41062 | A vulnerability has been discovered in version 4.0.5 of appRain CMF, consisting of an authenticated reflected XSS due to a lack of proper validation of user input, through the 'page' parameter in /apprain/developer/addons. | medium |
CVE-2025-41061 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/uploadify. | medium |
CVE-2025-41060 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/tree. | medium |
CVE-2025-41059 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/tablesorter. | medium |
CVE-2025-41058 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/row_manager. | medium |
CVE-2025-41057 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/rich_text_editor. | medium |
CVE-2025-41056 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/hysontable. | medium |
CVE-2025-41055 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/dialogs. | medium |
CVE-2025-41054 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/cycle. | medium |
CVE-2025-41053 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/commonresource. | medium |
CVE-2025-41052 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/canvasjs. | medium |
CVE-2025-41051 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/bootstrap. | medium |
CVE-2025-41050 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/base_libs. | medium |
CVE-2025-41049 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/appform. | medium |
CVE-2025-41048 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/admin. | medium |
CVE-2025-41047 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/ace. | medium |
CVE-2025-41046 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Addon][layouts]' and 'data[Addon][layouts_except]' parameters in /apprain/developer/addons/update/960grid. | medium |
CVE-2025-41045 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[sconfig][ethical_licensekey]' parameter in /apprain/admin/config/ethical. | medium |
CVE-2025-41044 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[Page][name]' parameter in /apprain/page/manage-static-pages/create. | medium |
CVE-2025-41043 | A vulnerability has been discovered in appRain CMF version 4.0.5, consisting of a stored authenticated XSS due to a lack of proper validation of user input, through the 'data[AppReportCode][id]' and 'data[AppReportCode][name]' parameters in /apprain/appreport/manage/. | medium |