| CVE-2025-37749 | In the Linux kernel, the following vulnerability has been resolved: net: ppp: Add bound checking for skb data on ppp_sync_txmung Ensure we have enough data in linear buffer from skb before accessing initial bytes. This prevents potential out-of-bounds accesses when processing short packets. When ppp_sync_txmung receives an incoming package with an empty payload: (remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header) $18 = { type = 0x1, ver = 0x1, code = 0x0, sid = 0x2, length = 0x0, tag = 0xffff8880371cdb96 } from the skb struct (trimmed) tail = 0x16, end = 0x140, head = 0xffff88803346f400 "4", data = 0xffff88803346f416 ":\377", truesize = 0x380, len = 0x0, data_len = 0x0, mac_len = 0xe, hdr_len = 0x0, it is not safe to access data[2]. [[email protected]: fixed subj typo] | medium |
| CVE-2025-37748 | In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group Currently, mtk_iommu calls during probe iommu_device_register before the hw_list from driver data is initialized. Since iommu probing issue fix, it leads to NULL pointer dereference in mtk_iommu_device_group when hw_list is accessed with list_first_entry (not null safe). So, change the call order to ensure iommu_device_register is called after the driver data are initialized. | high |
| CVE-2025-37747 | In the Linux kernel, the following vulnerability has been resolved: perf: Fix hang while freeing sigtrap event Perf can hang while freeing a sigtrap event if a related deferred signal hadn't managed to be sent before the file got closed: perf_event_overflow() task_work_add(perf_pending_task) fput() task_work_add(____fput()) task_work_run() ____fput() perf_release() perf_event_release_kernel() _free_event() perf_pending_task_sync() task_work_cancel() -> FAILED rcuwait_wait_event() Once task_work_run() is running, the list of pending callbacks is removed from the task_struct and from this point on task_work_cancel() can't remove any pending and not yet started work items, hence the task_work_cancel() failure and the hang on rcuwait_wait_event(). Task work could be changed to remove one work at a time, so a work running on the current task can always cancel a pending one, however the wait / wake design is still subject to inverted dependencies when remote targets are involved, as pictured by Oleg: T1 T2 fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid); close(fd) close(fd) <IRQ> <IRQ> perf_event_overflow() perf_event_overflow() task_work_add(perf_pending_task) task_work_add(perf_pending_task) </IRQ> </IRQ> fput() fput() task_work_add(____fput()) task_work_add(____fput()) task_work_run() task_work_run() ____fput() ____fput() perf_release() perf_release() perf_event_release_kernel() perf_event_release_kernel() _free_event() _free_event() perf_pending_task_sync() perf_pending_task_sync() rcuwait_wait_event() rcuwait_wait_event() Therefore the only option left is to acquire the event reference count upon queueing the perf task work and release it from the task work, just like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release") but without the leaks it fixed. Some adjustments are necessary to make it work: * A child event might dereference its parent upon freeing. Care must be taken to release the parent last. * Some places assuming the event doesn't have any reference held and therefore can be freed right away must instead put the reference and let the reference counting to its job. | medium |
| CVE-2025-37746 | In the Linux kernel, the following vulnerability has been resolved: perf/dwc_pcie: fix duplicate pci_dev devices During platform_device_register, wrongly using struct device pci_dev as platform_data caused a kmemdup copy of pci_dev. Worse still, accessing the duplicated device leads to list corruption as its mutex content (e.g., list, magic) remains the same as the original. | medium |
| CVE-2025-37745 | In the Linux kernel, the following vulnerability has been resolved: PM: hibernate: Avoid deadlock in hibernate_compressor_param_set() syzbot reported a deadlock in lock_system_sleep() (see below). The write operation to "/sys/module/hibernate/parameters/compressor" conflicts with the registration of ieee80211 device, resulting in a deadlock when attempting to acquire system_transition_mutex under param_lock. To avoid this deadlock, change hibernate_compressor_param_set() to use mutex_trylock() for attempting to acquire system_transition_mutex and return -EBUSY when it fails. Task flags need not be saved or adjusted before calling mutex_trylock(&system_transition_mutex) because the caller is not going to end up waiting for this mutex and if it runs concurrently with system suspend in progress, it will be frozen properly when it returns to user space. syzbot report: syz-executor895/5833 is trying to acquire lock: ffffffff8e0828c8 (system_transition_mutex){+.+.}-{4:4}, at: lock_system_sleep+0x87/0xa0 kernel/power/main.c:56 but task is already holding lock: ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: kernel_param_lock kernel/params.c:607 [inline] ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: param_attr_store+0xe6/0x300 kernel/params.c:586 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (param_lock){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ieee80211_rate_control_ops_get net/mac80211/rate.c:220 [inline] rate_control_alloc net/mac80211/rate.c:266 [inline] ieee80211_init_rate_ctrl_alg+0x18d/0x6b0 net/mac80211/rate.c:1015 ieee80211_register_hw+0x20cd/0x4060 net/mac80211/main.c:1531 mac80211_hwsim_new_radio+0x304e/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5558 init_mac80211_hwsim+0x432/0x8c0 drivers/net/wireless/virtual/mac80211_hwsim.c:6910 do_one_initcall+0x128/0x700 init/main.c:1257 do_initcall_level init/main.c:1319 [inline] do_initcalls init/main.c:1335 [inline] do_basic_setup init/main.c:1354 [inline] kernel_init_freeable+0x5c7/0x900 init/main.c:1568 kernel_init+0x1c/0x2b0 init/main.c:1457 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #2 (rtnl_mutex){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 wg_pm_notification drivers/net/wireguard/device.c:80 [inline] wg_pm_notification+0x49/0x180 drivers/net/wireguard/device.c:64 notifier_call_chain+0xb7/0x410 kernel/notifier.c:85 notifier_call_chain_robust kernel/notifier.c:120 [inline] blocking_notifier_call_chain_robust kernel/notifier.c:345 [inline] blocking_notifier_call_chain_robust+0xc9/0x170 kernel/notifier.c:333 pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102 snapshot_open+0x189/0x2b0 kernel/power/user.c:77 misc_open+0x35a/0x420 drivers/char/misc.c:179 chrdev_open+0x237/0x6a0 fs/char_dev.c:414 do_dentry_open+0x735/0x1c40 fs/open.c:956 vfs_open+0x82/0x3f0 fs/open.c:1086 do_open fs/namei.c:3830 [inline] path_openat+0x1e88/0x2d80 fs/namei.c:3989 do_filp_open+0x20c/0x470 fs/namei.c:4016 do_sys_openat2+0x17a/0x1e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x175/0x210 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 ((pm_chain_head).rwsem){++++}-{4:4}: down_read+0x9a/0x330 kernel/locking/rwsem.c:1524 blocking_notifier_call_chain_robust kerne ---truncated--- | medium |
| CVE-2025-37744 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_pci_remove() Kmemleak reported this error: unreferenced object 0xffff1c165cec3060 (size 32): comm "insmod", pid 560, jiffies 4296964570 (age 235.596s) backtrace: [<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0 [<000000001203b155>] kmalloc_trace+0x40/0x88 [<0000000028adc9c8>] _request_firmware+0xb8/0x608 [<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80 [<000000005011a682>] local_pci_probe+0x48/0xd0 [<00000000077cd295>] pci_device_probe+0xb4/0x200 [<0000000087184c94>] really_probe+0x150/0x2c0 The firmware memory was allocated in ath12k_pci_probe(), but not freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is set. So call ath12k_fw_unmap() to free the memory. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 | medium |
| CVE-2025-37743 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid memory leak while enabling statistics Driver uses monitor destination rings for extended statistics mode and standalone monitor mode. In extended statistics mode, TLVs are parsed from the buffer received from the monitor destination ring and assigned to the ppdu_info structure to update per-packet statistics. In standalone monitor mode, along with per-packet statistics, the packet data (payload) is captured, and the driver updates per MSDU to mac80211. When the AP interface is enabled, only extended statistics mode is activated. As part of enabling monitor rings for collecting statistics, the driver subscribes to HAL_RX_MPDU_START TLV in the filter configuration. This TLV is received from the monitor destination ring, and kzalloc for the mon_mpdu object occurs, which is not freed, leading to a memory leak. The kzalloc for the mon_mpdu object is only required while enabling the standalone monitor interface. This causes a memory leak while enabling extended statistics mode in the driver. Fix this memory leak by removing the kzalloc for the mon_mpdu object in the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs. These TLV tags will be handled properly when enabling standalone monitor mode in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | medium |
| CVE-2025-37742 | In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of imap allocated in the diMount() function syzbot reports that hex_dump_to_buffer is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276 diFree+0x5ba/0x4350 fs/jfs/jfs_imap.c:876 jfs_evict_inode+0x510/0x550 fs/jfs/inode.c:156 evict+0x723/0xd10 fs/inode.c:796 iput_final fs/inode.c:1946 [inline] iput+0x97b/0xdb0 fs/inode.c:1972 txUpdateMap+0xf3e/0x1150 fs/jfs/jfs_txnmgr.c:2367 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x627/0x11d0 fs/jfs/jfs_txnmgr.c:2733 kthread+0x6b9/0xef0 kernel/kthread.c:464 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_post_alloc_hook mm/slub.c:4121 [inline] slab_alloc_node mm/slub.c:4164 [inline] __kmalloc_cache_noprof+0x8e3/0xdf0 mm/slub.c:4320 kmalloc_noprof include/linux/slab.h:901 [inline] diMount+0x61/0x7f0 fs/jfs/jfs_imap.c:105 jfs_mount+0xa8e/0x11d0 fs/jfs/jfs_mount.c:176 jfs_fill_super+0xa47/0x17c0 fs/jfs/super.c:523 get_tree_bdev_flags+0x6ec/0x910 fs/super.c:1636 get_tree_bdev+0x37/0x50 fs/super.c:1659 jfs_get_tree+0x34/0x40 fs/jfs/super.c:635 vfs_get_tree+0xb1/0x5a0 fs/super.c:1814 do_new_mount+0x71f/0x15e0 fs/namespace.c:3560 path_mount+0x742/0x1f10 fs/namespace.c:3887 do_mount fs/namespace.c:3900 [inline] __do_sys_mount fs/namespace.c:4111 [inline] __se_sys_mount+0x71f/0x800 fs/namespace.c:4088 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4088 x64_sys_call+0x39bf/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ===================================================== The reason is that imap is not properly initialized after memory allocation. It will cause the snprintf() function to write uninitialized data into linebuf within hex_dump_to_buffer(). Fix this by using kzalloc instead of kmalloc to clear its content at the beginning in diMount(). | high |
| CVE-2025-37741 | In the Linux kernel, the following vulnerability has been resolved: jfs: Prevent copying of nlink with value 0 from disk inode syzbot report a deadlock in diFree. [1] When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4, which does not match the mounted loop device, causing the mapping of the mounted loop device to be invalidated. When creating the directory and creating the inode of iag in diReadSpecial(), read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the metapage data it returns is corrupted, which causes the nlink value of 0 to be assigned to the iag inode when executing copy_from_dinode(), which ultimately causes a deadlock when entering diFree(). To avoid this, first check the nlink value of dinode before setting iag inode. [1] WARNING: possible recursive locking detected 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted -------------------------------------------- syz-executor301/5309 is trying to acquire lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 but task is already holding lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(imap->im_aglock[index])); lock(&(imap->im_aglock[index])); *** DEADLOCK *** May be due to missing lock nesting notation 5 locks held by syz-executor301/5309: #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline] #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669 stack backtrace: CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037 check_deadlock kernel/locking/lockdep.c:3089 [inline] validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156 evict+0x4e8/0x9b0 fs/inode.c:725 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline] duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022 diNewIAG fs/jfs/jfs_imap.c:2597 [inline] diAllocExt fs/jfs/jfs_imap.c:1905 [inline] diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/en ---truncated--- | high |
| CVE-2025-37740 | In the Linux kernel, the following vulnerability has been resolved: jfs: add sanity check for agwidth in dbMount The width in dmapctl of the AG is zero, it trigger a divide error when calculating the control page level in dbAllocAG. To avoid this issue, add a check for agwidth in dbAllocAG. | high |
| CVE-2025-37739 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() syzbot reports an UBSAN issue as below: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in fs/f2fs/node.h:381:10 index 18446744073709550692 is out of range for type '__le32[5]' (aka 'unsigned int[5]') CPU: 0 UID: 0 PID: 5318 Comm: syz.0.0 Not tainted 6.14.0-rc3-syzkaller-00060-g6537cfb395f3 #0 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429 get_nid fs/f2fs/node.h:381 [inline] f2fs_truncate_inode_blocks+0xa5e/0xf60 fs/f2fs/node.c:1181 f2fs_do_truncate_blocks+0x782/0x1030 fs/f2fs/file.c:808 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:836 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:886 f2fs_file_write_iter+0x1bdb/0x2550 fs/f2fs/file.c:5093 aio_write+0x56b/0x7c0 fs/aio.c:1633 io_submit_one+0x8a7/0x18a0 fs/aio.c:2052 __do_sys_io_submit fs/aio.c:2111 [inline] __se_sys_io_submit+0x171/0x2e0 fs/aio.c:2081 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f238798cde9 index 18446744073709550692 (decimal, unsigned long long) = 0xfffffffffffffc64 (hexadecimal, unsigned long long) = -924 (decimal, long long) In f2fs_truncate_inode_blocks(), UBSAN detects that get_nid() tries to access .i_nid[-924], it means both offset[0] and level should zero. The possible case should be in f2fs_do_truncate_blocks(), we try to truncate inode size to zero, however, dn.ofs_in_node is zero and dn.node_page is not an inode page, so it fails to truncate inode page, and then pass zeroed free_from to f2fs_truncate_inode_blocks(), result in this issue. if (dn.ofs_in_node || IS_INODE(dn.node_page)) { f2fs_truncate_data_blocks_range(&dn, count); free_from += count; } I guess the reason why dn.node_page is not an inode page could be: there are multiple nat entries share the same node block address, once the node block address was reused, f2fs_get_node_page() may load a non-inode block. Let's add a sanity check for such condition to avoid out-of-bounds access issue. | high |
| CVE-2025-37738 | In the Linux kernel, the following vulnerability has been resolved: ext4: ignore xattrs past end Once inside 'ext4_xattr_inode_dec_ref_all' we should ignore xattrs entries past the 'end' entry. This fixes the following KASAN reported issue: ================================================================== BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 Read of size 4 at addr ffff888012c120c4 by task repro/2065 CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1fd/0x300 ? tcp_gro_dev_warn+0x260/0x260 ? _printk+0xc0/0x100 ? read_lock_is_recursive+0x10/0x10 ? irq_work_queue+0x72/0xf0 ? __virt_addr_valid+0x17b/0x4b0 print_address_description+0x78/0x390 print_report+0x107/0x1f0 ? __virt_addr_valid+0x17b/0x4b0 ? __virt_addr_valid+0x3ff/0x4b0 ? __phys_addr+0xb5/0x160 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 kasan_report+0xcc/0x100 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ? ext4_xattr_delete_inode+0xd30/0xd30 ? __ext4_journal_ensure_credits+0x5f0/0x5f0 ? __ext4_journal_ensure_credits+0x2b/0x5f0 ? inode_update_timestamps+0x410/0x410 ext4_xattr_delete_inode+0xb64/0xd30 ? ext4_truncate+0xb70/0xdc0 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20 ? __ext4_mark_inode_dirty+0x670/0x670 ? ext4_journal_check_start+0x16f/0x240 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0 ext4_evict_inode+0xc8c/0xff0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 ? do_raw_spin_unlock+0x53/0x8a0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 evict+0x4ac/0x950 ? proc_nr_inodes+0x310/0x310 ? trace_ext4_drop_inode+0xa2/0x220 ? _raw_spin_unlock+0x1a/0x30 ? iput+0x4cb/0x7e0 do_unlinkat+0x495/0x7c0 ? try_break_deleg+0x120/0x120 ? 0xffffffff81000000 ? __check_object_size+0x15a/0x210 ? strncpy_from_user+0x13e/0x250 ? getname_flags+0x1dc/0x530 __x64_sys_unlinkat+0xc8/0xf0 do_syscall_64+0x65/0x110 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x434ffd Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107 RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001 </TASK> The buggy address belongs to the object at ffff888012c12000 which belongs to the cache filp of size 360 The buggy address is located 196 bytes inside of freed 360-byte region [ffff888012c12000, ffff888012c12168) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x40(head|node=0|zone=0) page_type: f5(slab) raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000 head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888012c12180: fc fc fc fc fc fc fc fc fc ---truncated--- | high |
| CVE-2025-23163 | In the Linux kernel, the following vulnerability has been resolved: net: vlan: don't propagate flags on open With the device instance lock, there is now a possibility of a deadlock: [ 1.211455] ============================================ [ 1.211571] WARNING: possible recursive locking detected [ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted [ 1.211823] -------------------------------------------- [ 1.211936] ip/184 is trying to acquire lock: [ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0 [ 1.212207] [ 1.212207] but task is already holding lock: [ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.212487] [ 1.212487] other info that might help us debug this: [ 1.212626] Possible unsafe locking scenario: [ 1.212626] [ 1.212751] CPU0 [ 1.212815] ---- [ 1.212871] lock(&dev->lock); [ 1.212944] lock(&dev->lock); [ 1.213016] [ 1.213016] *** DEADLOCK *** [ 1.213016] [ 1.213143] May be due to missing lock nesting notation [ 1.213143] [ 1.213294] 3 locks held by ip/184: [ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0 [ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0 [ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.213895] [ 1.213895] stack backtrace: [ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 [ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 1.213994] Call Trace: [ 1.213995] <TASK> [ 1.213996] dump_stack_lvl+0x8e/0xd0 [ 1.214000] print_deadlock_bug+0x28b/0x2a0 [ 1.214020] lock_acquire+0xea/0x2a0 [ 1.214027] __mutex_lock+0xbf/0xd40 [ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI [ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev [ 1.214042] __dev_open+0x145/0x270 [ 1.214046] __dev_change_flags+0xb0/0x1e0 [ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev [ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info [ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0 [ 1.214058] notifier_call_chain+0x78/0x120 [ 1.214062] netif_open+0x6d/0x90 [ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0 [ 1.214066] bond_enslave+0x64c/0x1230 [ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0 [ 1.214077] do_setlink+0x516/0x13b0 [ 1.214094] rtnl_newlink+0xaba/0xb80 [ 1.214132] rtnetlink_rcv_msg+0x440/0x490 [ 1.214144] netlink_rcv_skb+0xeb/0x120 [ 1.214150] netlink_unicast+0x1f9/0x320 [ 1.214153] netlink_sendmsg+0x346/0x3f0 [ 1.214157] __sock_sendmsg+0x86/0xb0 [ 1.214160] ____sys_sendmsg+0x1c8/0x220 [ 1.214164] ___sys_sendmsg+0x28f/0x2d0 [ 1.214179] __x64_sys_sendmsg+0xef/0x140 [ 1.214184] do_syscall_64+0xec/0x1d0 [ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 1.214191] RIP: 0033:0x7f2d1b4a7e56 Device setup: netdevsim0 (down) ^ ^ bond netdevsim1.100@netdevsim1 allmulticast=on (down) When we enslave the lower device (netdevsim0) which has a vlan, we propagate vlan's allmuti/promisc flags during ndo_open. This causes (re)locking on of the real_dev. Propagate allmulti/promisc on flags change, not on the open. There is a slight semantics change that vlans that are down now propagate the flags, but this seems unlikely to result in the real issues. Reproducer: echo 0 1 > /sys/bus/netdevsim/new_device dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*) dev=$(echo $dev_path | rev | cut -d/ -f1 | rev) ip link set dev $dev name netdevsim0 ip link set dev netdevsim0 up ip link add link netdevsim0 name netdevsim0.100 type vlan id 100 ip link set dev netdevsim0.100 allm ---truncated--- | medium |
| CVE-2025-23162 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Don't try to trigger a full GT reset if VF VFs don't have access to the GDRST(0x941c) register that driver uses to reset a GT. Attempt to trigger a reset using debugfs: $ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset or due to a hang condition detected by the driver leads to: [ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe] [ ] xe 0000:00:02.1: [drm] GT0: reset queued [ ] xe 0000:00:02.1: [drm] GT0: reset started [ ] ------------[ cut here ]------------ [ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0 [ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] Call Trace: [ ] <TASK> [ ] ? show_regs+0x6c/0x80 [ ] ? __warn+0x93/0x1c0 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? report_bug+0x182/0x1b0 [ ] ? handle_bug+0x6e/0xb0 [ ] ? exc_invalid_op+0x18/0x80 [ ] ? asm_exc_invalid_op+0x1b/0x20 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe] [ ] ? __mutex_unlock_slowpath+0x41/0x2e0 [ ] xe_mmio_write32+0x64/0x150 [xe] [ ] do_gt_reset+0x2f/0xa0 [xe] [ ] gt_reset_worker+0x14e/0x1e0 [xe] [ ] process_one_work+0x21c/0x740 [ ] worker_thread+0x1db/0x3c0 Fix that by sending H2G VF_RESET(0x5507) action instead. | high |
| CVE-2025-23161 | In the Linux kernel, the following vulnerability has been resolved: PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type The access to the PCI config space via pci_ops::read and pci_ops::write is a low-level hardware access. The functions can be accessed with disabled interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in the same context as the pci_lock. Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with interrupts disabled. This was reported as: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 Call Trace: rt_spin_lock+0x4e/0x130 vmd_pci_read+0x8d/0x100 [vmd] pci_user_read_config_byte+0x6f/0xe0 pci_read_config+0xfe/0x290 sysfs_kf_bin_read+0x68/0x90 [bigeasy: reword commit message] Tested-off-by: Luis Claudio R. Goncalves <[email protected]> [kwilczynski: commit log] [bhelgaas: add back report info from https://lore.kernel.org/lkml/[email protected]/] | high |
| CVE-2025-23160 | In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix a resource leak related to the scp device in FW initialization On Mediatek devices with a system companion processor (SCP) the mtk_scp structure has to be removed explicitly to avoid a resource leak. Free the structure in case the allocation of the firmware structure fails during the firmware initialization. | medium |
| CVE-2025-23159 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add a check to handle OOB in sfr region sfr->buf_size is in shared memory and can be modified by malicious user. OOB write is possible when the size is made higher than actual sfr data buffer. Cap the size to allocated size for such cases. | high |
| CVE-2025-23158 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add check to handle incorrect queue size qsize represents size of shared queued between driver and video firmware. Firmware can modify this value to an invalid large value. In such situation, empty_space will be bigger than the space actually available. Since new_wr_idx is not checked, so the following code will result in an OOB write. ... qsize = qhdr->q_size if (wr_idx >= rd_idx) empty_space = qsize - (wr_idx - rd_idx) .... if (new_wr_idx < qsize) { memcpy(wr_ptr, packet, dwords << 2) --> OOB write Add check to ensure qsize is within the allocated size while reading and writing packets into the queue. | high |
| CVE-2025-23157 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: add check to avoid out of bound access There is a possibility that init_codecs is invoked multiple times during manipulated payload from video firmware. In such case, if codecs_count can get incremented to value more than MAX_CODEC_NUM, there can be OOB access. Reset the count so that it always starts from beginning. | high |
| CVE-2025-23156 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: refactor hfi packet parsing logic words_count denotes the number of words in total payload, while data points to payload of various property within it. When words_count reaches last word, data can access memory beyond the total payload. This can lead to OOB access. With this patch, the utility api for handling individual properties now returns the size of data consumed. Accordingly remaining bytes are calculated before parsing the payload, thereby eliminates the OOB access possibilities. | high |
| CVE-2025-23155 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix accessing freed irq affinity_hint The cpumask should not be a local variable, since its pointer is saved to irq_desc and may be accessed from procfs. To fix it, use the persistent mask cpumask_of(cpu#). | high |
| CVE-2025-23154 | In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix io_req_post_cqe abuse by send bundle [ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0 [ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0 [ 115.001880][ T5313] Call Trace: [ 115.002222][ T5313] <TASK> [ 115.007813][ T5313] io_send+0x4fe/0x10f0 [ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740 [ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0 [ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600 [ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0 As the comment states, io_req_post_cqe() should only be used by multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are not. Add a flag signifying whether a request wants to post multiple CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but that's left out for simplicity. | medium |
| CVE-2025-23153 | In the Linux kernel, the following vulnerability has been resolved: arm/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch() Fix a silly bug where an array was used outside of its scope. | medium |
| CVE-2025-23152 | In the Linux kernel, the following vulnerability has been resolved: arm64/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch() Fix a silly bug where an array was used outside of its scope. | medium |
| CVE-2025-23151 | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix race between unprepare and queue_buf A client driver may use mhi_unprepare_from_transfer() to quiesce incoming data during the client driver's tear down. The client driver might also be processing data at the same time, resulting in a call to mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs after mhi_unprepare_from_transfer() has torn down the channel, a panic will occur due to an invalid dereference leading to a page fault. This occurs because mhi_gen_tre() does not verify the channel state after locking it. Fix this by having mhi_gen_tre() confirm the channel state is valid, or return error to avoid accessing deinitialized data. [mani: added stable tag] | high |
| CVE-2025-23150 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix off-by-one error in do_split Syzkaller detected a use-after-free issue in ext4_insert_dentry that was caused by out-of-bounds access due to incorrect splitting in do_split. BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109 Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847 CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109 add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154 make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455 ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796 ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431 vfs_symlink+0x137/0x2e0 fs/namei.c:4615 do_symlinkat+0x222/0x3a0 fs/namei.c:4641 __do_sys_symlink fs/namei.c:4662 [inline] __se_sys_symlink fs/namei.c:4660 [inline] __x64_sys_symlink+0x7a/0x90 fs/namei.c:4660 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The following loop is located right above 'if' statement. for (i = count-1; i >= 0; i--) { /* is more than half of this entry in 2nd half of the block? */ if (size + map[i].size/2 > blocksize/2) break; size += map[i].size; move++; } 'i' in this case could go down to -1, in which case sum of active entries wouldn't exceed half the block size, but previous behaviour would also do split in half if sum would exceed at the very last block, which in case of having too many long name files in a single block could lead to out-of-bounds access and following use-after-free. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | high |
| CVE-2025-23149 | In the Linux kernel, the following vulnerability has been resolved: tpm: do not start chip while suspended Checking TPM_CHIP_FLAG_SUSPENDED after the call to tpm_find_get_ops() can lead to a spurious tpm_chip_start() call: [35985.503771] i2c i2c-1: Transfer while suspended [35985.503796] WARNING: CPU: 0 PID: 74 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xbe/0x810 [35985.503802] Modules linked in: [35985.503808] CPU: 0 UID: 0 PID: 74 Comm: hwrng Tainted: G W 6.13.0-next-20250203-00005-gfa0cb5642941 #19 9c3d7f78192f2d38e32010ac9c90fdc71109ef6f [35985.503814] Tainted: [W]=WARN [35985.503817] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023 [35985.503819] RIP: 0010:__i2c_transfer+0xbe/0x810 [35985.503825] Code: 30 01 00 00 4c 89 f7 e8 40 fe d8 ff 48 8b 93 80 01 00 00 48 85 d2 75 03 49 8b 16 48 c7 c7 0a fb 7c a7 48 89 c6 e8 32 ad b0 fe <0f> 0b b8 94 ff ff ff e9 33 04 00 00 be 02 00 00 00 83 fd 02 0f 5 [35985.503828] RSP: 0018:ffffa106c0333d30 EFLAGS: 00010246 [35985.503833] RAX: 074ba64aa20f7000 RBX: ffff8aa4c1167120 RCX: 0000000000000000 [35985.503836] RDX: 0000000000000000 RSI: ffffffffa77ab0e4 RDI: 0000000000000001 [35985.503838] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [35985.503841] R10: 0000000000000004 R11: 00000001000313d5 R12: ffff8aa4c10f1820 [35985.503843] R13: ffff8aa4c0e243c0 R14: ffff8aa4c1167250 R15: ffff8aa4c1167120 [35985.503846] FS: 0000000000000000(0000) GS:ffff8aa4eae00000(0000) knlGS:0000000000000000 [35985.503849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [35985.503852] CR2: 00007fab0aaf1000 CR3: 0000000105328000 CR4: 00000000003506f0 [35985.503855] Call Trace: [35985.503859] <TASK> [35985.503863] ? __warn+0xd4/0x260 [35985.503868] ? __i2c_transfer+0xbe/0x810 [35985.503874] ? report_bug+0xf3/0x210 [35985.503882] ? handle_bug+0x63/0xb0 [35985.503887] ? exc_invalid_op+0x16/0x50 [35985.503892] ? asm_exc_invalid_op+0x16/0x20 [35985.503904] ? __i2c_transfer+0xbe/0x810 [35985.503913] tpm_cr50_i2c_transfer_message+0x24/0xf0 [35985.503920] tpm_cr50_i2c_read+0x8e/0x120 [35985.503928] tpm_cr50_request_locality+0x75/0x170 [35985.503935] tpm_chip_start+0x116/0x160 [35985.503942] tpm_try_get_ops+0x57/0x90 [35985.503948] tpm_find_get_ops+0x26/0xd0 [35985.503955] tpm_get_random+0x2d/0x80 Don't move forward with tpm_chip_start() inside tpm_try_get_ops(), unless TPM_CHIP_FLAG_SUSPENDED is not set. tpm_find_get_ops() will return NULL in such a failure case. | high |
| CVE-2025-23148 | In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe() soc_dev_attr->revision could be NULL, thus, a pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool. | high |
| CVE-2025-23147 | In the Linux kernel, the following vulnerability has been resolved: i3c: Add NULL pointer check in i3c_master_queue_ibi() The I3C master driver may receive an IBI from a target device that has not been probed yet. In such cases, the master calls `i3c_master_queue_ibi()` to queue an IBI work task, leading to "Unable to handle kernel read from unreadable memory" and resulting in a kernel panic. Typical IBI handling flow: 1. The I3C master scans target devices and probes their respective drivers. 2. The target device driver calls `i3c_device_request_ibi()` to enable IBI and assigns `dev->ibi = ibi`. 3. The I3C master receives an IBI from the target device and calls `i3c_master_queue_ibi()` to queue the target device driver’s IBI handler task. However, since target device events are asynchronous to the I3C probe sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`, leading to a kernel panic. Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing an uninitialized `dev->ibi`, ensuring stability. | medium |
| CVE-2025-23146 | In the Linux kernel, the following vulnerability has been resolved: mfd: ene-kb3930: Fix a potential NULL pointer dereference The off_gpios could be NULL. Add missing check in the kb3930_probe(). This is similar to the issue fixed in commit b1ba8bcb2d1f ("backlight: hx8357: Fix potential NULL pointer dereference"). This was detected by our static analysis tool. | high |
| CVE-2025-23145 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix NULL pointer in can_accept_new_subflow When testing valkey benchmark tool with MPTCP, the kernel panics in 'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL. Call trace: mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P) subflow_syn_recv_sock (./net/mptcp/subflow.c:854) tcp_check_req (./net/ipv4/tcp_minisocks.c:863) tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268) ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207) ip_local_deliver_finish (./net/ipv4/ip_input.c:234) ip_local_deliver (./net/ipv4/ip_input.c:254) ip_rcv_finish (./net/ipv4/ip_input.c:449) ... According to the debug log, the same req received two SYN-ACK in a very short time, very likely because the client retransmits the syn ack due to multiple reasons. Even if the packets are transmitted with a relevant time interval, they can be processed by the server on different CPUs concurrently). The 'subflow_req->msk' ownership is transferred to the subflow the first, and there will be a risk of a null pointer dereference here. This patch fixes this issue by moving the 'subflow_req->msk' under the `own_req == true` conditional. Note that the !msk check in subflow_hmac_valid() can be dropped, because the same check already exists under the own_req mpj branch where the code has been moved to. | high |
| CVE-2025-23144 | In the Linux kernel, the following vulnerability has been resolved: backlight: led_bl: Hold led_access lock when calling led_sysfs_disable() Lockdep detects the following issue on led-backlight removal: [ 142.315935] ------------[ cut here ]------------ [ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80 ... [ 142.500725] Call trace: [ 142.503176] led_sysfs_enable+0x54/0x80 (P) [ 142.507370] led_bl_remove+0x80/0xa8 [led_bl] [ 142.511742] platform_remove+0x30/0x58 [ 142.515501] device_remove+0x54/0x90 ... Indeed, led_sysfs_enable() has to be called with the led_access lock held. Hold the lock when calling led_sysfs_disable(). | high |
| CVE-2025-23143 | In the Linux kernel, the following vulnerability has been resolved: net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod. When I ran the repro [0] and waited a few seconds, I observed two LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1] Reproduction Steps: 1) Mount CIFS 2) Add an iptables rule to drop incoming FIN packets for CIFS 3) Unmount CIFS 4) Unload the CIFS module 5) Remove the iptables rule At step 3), the CIFS module calls sock_release() for the underlying TCP socket, and it returns quickly. However, the socket remains in FIN_WAIT_1 because incoming FIN packets are dropped. At this point, the module's refcnt is 0 while the socket is still alive, so the following rmmod command succeeds. # ss -tan State Recv-Q Send-Q Local Address:Port Peer Address:Port FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445 # lsmod | grep cifs cifs 1159168 0 This highlights a discrepancy between the lifetime of the CIFS module and the underlying TCP socket. Even after CIFS calls sock_release() and it returns, the TCP socket does not die immediately in order to close the connection gracefully. While this is generally fine, it causes an issue with LOCKDEP because CIFS assigns a different lock class to the TCP socket's sk->sk_lock using sock_lock_init_class_and_name(). Once an incoming packet is processed for the socket or a timer fires, sk->sk_lock is acquired. Then, LOCKDEP checks the lock context in check_wait_context(), where hlock_class() is called to retrieve the lock class. However, since the module has already been unloaded, hlock_class() logs a warning and returns NULL, triggering the null-ptr-deref. If LOCKDEP is enabled, we must ensure that a module calling sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded while such a socket is still alive to prevent this issue. Let's hold the module reference in sock_lock_init_class_and_name() and release it when the socket is freed in sk_prot_free(). Note that sock_lock_init() clears sk->sk_owner for svc_create_socket() that calls sock_lock_init_class_and_name() for a listening socket, which clones a socket by sk_clone_lock() without GFP_ZERO. [0]: CIFS_SERVER="10.0.0.137" CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST" DEV="enp0s3" CRED="/root/WindowsCredential.txt" MNT=$(mktemp -d /tmp/XXXXXX) mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1 iptables -A INPUT -s ${CIFS_SERVER} -j DROP for i in $(seq 10); do umount ${MNT} rmmod cifs sleep 1 done rm -r ${MNT} iptables -D INPUT -s ${CIFS_SERVER} -j DROP [1]: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) ... Call Trace: <IRQ> __lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178) lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816) _raw_spin_lock_nested (kernel/locking/spinlock.c:379) tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350) ... BUG: kernel NULL pointer dereference, address: 00000000000000c4 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire (kernel/ ---truncated--- | medium |
| CVE-2025-23142 | In the Linux kernel, the following vulnerability has been resolved: sctp: detect and prevent references to a freed transport in sendmsg sctp_sendmsg() re-uses associations and transports when possible by doing a lookup based on the socket endpoint and the message destination address, and then sctp_sendmsg_to_asoc() sets the selected transport in all the message chunks to be sent. There's a possible race condition if another thread triggers the removal of that selected transport, for instance, by explicitly unbinding an address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have been set up and before the message is sent. This can happen if the send buffer is full, during the period when the sender thread temporarily releases the socket lock in sctp_wait_for_sndbuf(). This causes the access to the transport data in sctp_outq_select_transport(), when the association outqueue is flushed, to result in a use-after-free read. This change avoids this scenario by having sctp_transport_free() signal the freeing of the transport, tagging it as "dead". In order to do this, the patch restores the "dead" bit in struct sctp_transport, which was removed in commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport"). Then, in the scenario where the sender thread has released the socket lock in sctp_wait_for_sndbuf(), the bit is checked again after re-acquiring the socket lock to detect the deletion. This is done while holding a reference to the transport to prevent it from being freed in the process. If the transport was deleted while the socket lock was relinquished, sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the send. The bug was found by a private syzbot instance (see the error report [1] and the C reproducer that triggers it [2]). | high |
| CVE-2025-23141 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses Acquire a lock on kvm->srcu when userspace is getting MP state to handle a rather extreme edge case where "accepting" APIC events, i.e. processing pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP state will trigger a nested VM-Exit by way of ->check_nested_events(), and emuating the nested VM-Exit can access guest memory. The splat was originally hit by syzkaller on a Google-internal kernel, and reproduced on an upstream kernel by hacking the triple_fault_event_test selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario. ============================= WARNING: suspicious RCU usage 6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted ----------------------------- include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by triple_fault_ev/1256: #0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm] stack backtrace: CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x144/0x190 kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] read_and_check_msr_entry+0x2e/0x180 [kvm_intel] __nested_vmx_vmexit+0x550/0xde0 [kvm_intel] kvm_check_nested_events+0x1b/0x30 [kvm] kvm_apic_accept_events+0x33/0x100 [kvm] kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm] kvm_vcpu_ioctl+0x33e/0x9a0 [kvm] __x64_sys_ioctl+0x8b/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> | medium |
| CVE-2025-23140 | In the Linux kernel, the following vulnerability has been resolved: misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error After devm_request_irq() fails with error in pci_endpoint_test_request_irq(), the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs have been released. However, some requested IRQs remain unreleased, so there are still /proc/irq/* entries remaining, and this results in WARN() with the following message: remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0' WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c To solve this issue, set the number of remaining IRQs to test->num_irqs, and release IRQs in advance by calling pci_endpoint_test_release_irq(). [kwilczynski: commit log] | high |
| CVE-2025-23139 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score |
| CVE-2023-46669 | Exposure of sensitive information to local unauthorized actors in Elastic Agent and Elastic Security Endpoint can lead to loss of confidentiality and impersonation of Endpoint to the Elastic Stack. This issue was identified by Elastic engineers and Elastic has no indication that it is known or has been exploited by malicious actors. | medium |
| CVE-2025-4164 | A vulnerability, which was classified as critical, was found in PHPGurukul Employee Record Management System 1.3. Affected is an unknown function of the file changepassword.php. The manipulation of the argument currentpassword leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | medium |
| CVE-2025-4163 | A vulnerability, which was classified as critical, has been found in PHPGurukul Land Record System 1.0. This issue affects some unknown processing of the file /admin/aboutus.php. The manipulation of the argument pagetitle leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well. | medium |
| CVE-2025-3890 | The WordPress Simple Shopping Cart plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'wp_cart_button' shortcode in all versions up to, and including, 5.1.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | medium |
| CVE-2025-3889 | The WordPress Simple Shopping Cart plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.3 via the 'process_payment_data' due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to change the quantity of a product to a negative number, which subtracts the product cost from the total order cost. The attack will only work with Manual Checkout mode, as PayPal and Stripe will not process payments for a negative quantity. | medium |
| CVE-2025-3874 | The WordPress Simple Shopping Cart plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.3 due to lack of randomization of a user controlled key. This makes it possible for unauthenticated attackers to access customer shopping carts and edit product links, add or delete products, and discover coupon codes. | medium |
| CVE-2025-1529 | The AM LottiePlayer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via uploaded lottie files in all versions up to, and including, 3.5.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | medium |
| CVE-2025-4162 | A vulnerability classified as critical was found in PCMan FTP Server up to 2.0.7. This vulnerability affects unknown code of the component ASCII Command Handler. The manipulation leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | medium |
| CVE-2025-4161 | A vulnerability classified as critical has been found in PCMan FTP Server up to 2.0.7. This affects an unknown part of the component VERBOSE Command Handler. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | medium |
| CVE-2025-27007 | Incorrect Privilege Assignment vulnerability in Brainstorm Force SureTriggers allows Privilege Escalation.This issue affects SureTriggers: from n/a through 1.0.82. | critical |
| CVE-2025-4160 | A vulnerability was found in PCMan FTP Server up to 2.0.7. It has been rated as critical. Affected by this issue is some unknown functionality of the component LS Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | medium |
| CVE-2025-4159 | A vulnerability was found in PCMan FTP Server up to 2.0.7. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component GLOB Command Handler. The manipulation leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | medium |
| CVE-2025-4158 | A vulnerability was found in PCMan FTP Server up to 2.0.7. It has been classified as critical. Affected is an unknown function of the component PROMPT Command Handler. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | medium |
