| CVE-2026-89833 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages() There is potential deadloop in race condition: Thread A Thread B - fsync - f2fs_do_sync_file - f2fs_fsync_node_pages - last_fsync_dnode - folio_get(last_folio) - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - is_node_folio alwasy return false - atomic && !marked is always true, then goto retry | critical | 2026-09-16 |
| CVE-2026-89832 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chksum mismatch or inconsistent footer info, it needs to drop clear flag of node folio, in order to persist inconsistent node data to storage. | high | 2026-09-16 |
| CVE-2026-89831 | In the Linux kernel, the following vulnerability has been resolved: f2fs: protect critical_task_priority updates with s_umount The sysfs store path already takes s_umount for GC thread control entries, and ckpt_thread_ioprio is covered as well. critical_task_priority also updates checkpoint or GC kthread scheduling state, but it is not covered by that serialization. It can race with remount or teardown paths that are stopping those threads. Protect critical_task_priority sysfs writes with s_umount too. | critical | 2026-09-16 |
| CVE-2026-89830 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix valid block count leak on data block allocation failure In __allocate_data_block(), when allocating a new data block (dn->data_blkaddr == NULL_ADDR), inc_valid_block_count() is called first to increment total_valid_block_count and i_blocks. If the subsequent f2fs_allocate_data_block() fails, the function returns the error directly without rolling back the already-incremented block counts, causing a permanent leak. Fix this by calling dec_valid_block_count() to undo the increment before returning the error. The condition old_blkaddr == NULL_ADDR precisely identifies the case where inc_valid_block_count() was called. | critical | 2026-09-16 |
| CVE-2026-89829 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to pass folio->index to f2fs_sanity_check_node_footer() Otherwise in f2fs_sanity_check_node_footer(), it will check the same nid incorrectly. | high | 2026-09-16 |
| CVE-2026-89828 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix init ordering in amdgpu_vram_mgr_init() drmm_cgroup_register_region() is called before INIT_LIST_HEAD() and gpu_buddy_init() in amdgpu_vram_mgr_init(). If it fails, the function returns early and bypasses those initializations. Since adev->mman.initialized is set to true before amdgpu_vram_mgr_init() is called, a failure triggers amdgpu_ttm_fini(), which calls amdgpu_vram_mgr_fini(), which then: - Calls list_for_each_entry_safe() on reservations_pending and reserved_pages, whose list_head::next pointers are zero-initialized (NULL). The loop does not recognize them as empty and dereferences NULL. - Calls gpu_buddy_fini(), which iterates free_trees[] unconditionally via for_each_free_tree(). Since mm->free_trees is NULL (never allocated), this dereferences NULL. Both result in a kernel panic on the module load error path. Fix by moving drmm_cgroup_register_region() to after the list and buddy allocator are fully initialized, so the teardown path is safe to run. | medium | 2026-09-16 |
| CVE-2026-89827 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid force-completing uninitialized UVD rings uvd_v7_0_sw_init() does not initialize the UVD decode ring for an SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes the decode ring when restoring its fence sequence. Skip fence completion when the fence driver is not initialized. | critical | 2026-09-16 |
| CVE-2026-89826 | In the Linux kernel, the following vulnerability has been resolved: drm/panthor: harden firmware build-info bounds checks panthor_fw_read_build_info() checks whether the metadata range fits in the firmware image with hdr.meta_start + hdr.meta_size. Both fields are u32, so the addition can wrap and let an out-of-bounds range pass validation. The function also reads the "git_sha: " prefix without first checking that the metadata is long enough, and meta_size == 0 can underflow the NULL terminator index. Use subtraction-based bounds checking and reject metadata that is too short to contain the expected prefix and trailing NULL byte. | high | 2026-09-16 |
| CVE-2026-89825 | In the Linux kernel, the following vulnerability has been resolved: drm/panthor: fix firmware control interface bounds checks panthor_init_cs_iface() and panthor_init_csg_iface() validate firmware control interface offsets with 32-bit arithmetic and the size of the host wrapper structures. The offsets are derived from firmware-provided strides, so the arithmetic can wrap before the bounds check, and the host wrapper size is not the size of the firmware control interface being mapped. Use 64-bit arithmetic for the computed offsets and validate against the actual firmware control interface structure sizes with subtraction-based bounds checks. Also validate that the shared section is large enough for the global control interface before using it. | high | 2026-09-16 |
| CVE-2026-89824 | In the Linux kernel, the following vulnerability has been resolved: drm/panel-edp: fix i2c adapter leak on probe failure Make sure to drop the i2c adapter reference on probe failure (e.g. probe deferral) and on driver unbind also if a devicetree redundantly uses the 'ddc-i2c-bus' property to point to the aux ddc bus. | high | 2026-09-16 |
| CVE-2026-89823 | In the Linux kernel, the following vulnerability has been resolved: drm: fix race between partial drm_dev_register() failure and ioctl If drm_dev_register() fails after registering a minor (e.g. render minor registered, primary minor fails), userspace could have opened the first minor and entered a drm_dev_enter() critical section. Since the unplugged flag was never set, the ioctl proceeds while the error path tears down device resources. Fix this by introducing drm_dev_synchronize_unplug(), which sets the unplugged flag and waits for the SRCU barrier, ensuring all in-flight drm_dev_enter() critical sections complete before cleanup proceeds; call it on the error path of drm_dev_register(). | high | 2026-09-16 |
| CVE-2026-89822 | In the Linux kernel, the following vulnerability has been resolved: drm/i915: Guard against NULL driver_data in i915_pci_probe() pci_match_device() can return the dummy pci_device_id_any entry when a device is force-bound via sysfs driver_override, in which case ->driver_data is unset (NULL). i915_pci_probe() casts it to struct intel_device_info * unconditionally and dereferences intel_info->require_force_probe, causing a NULL-ptr-deref. (cherry picked from commit 2727922084672cc274ecea726ea00363c2893731) | critical | 2026-09-16 |
| CVE-2026-89821 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid divide-by-zero in __is_lut_linear() __is_lut_linear() computes the expected value of each entry with expected = i * MAX_DRM_LUT_VALUE / (size - 1); If it is ever called with a single-entry LUT, size - 1 is zero and the kernel takes a divide error (#DE). A LUT with fewer than two entries cannot describe a linear mapping anyway, so return false early instead of dividing by zero. | medium | 2026-09-16 |
| CVE-2026-89820 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix dc_lock leak on GPU reset error paths On GPU reset, dm_suspend() takes dc_lock and leaves it for dm_resume() to drop. If amdgpu_dm_commit_zero_streams() or dm_dmub_hw_init() fails, the function returns with the lock still held. The matching resume path is then skipped, so every later dc_lock take hangs. Release the cached DC state and unlock before returning the error. | medium | 2026-09-16 |
| CVE-2026-89819 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: validate plane degamma LUT size for private color prop Unlike the CRTC degamma path, which is guarded by amdgpu_dm_verify_lut_sizes(), the per-plane degamma LUT size was never validated before use. __set_dm_plane_degamma() passed the user-supplied size straight into __is_lut_linear() and, for a non-linear LUT, into __set_input_tf() -> __drm_lut_to_dc_gamma(), the latter always iterating MAX_COLOR_LUT_ENTRIES entries regardless of the actual LUT size. A malformed AMD_PLANE_DEGAMMA_LUT blob (e.g. a single entry) could thus trigger a divide-by-zero in __is_lut_linear() or an out-of-bounds read in __drm_lut_to_dc_gamma(). Reject any plane degamma LUT whose size does not match MAX_COLOR_LUT_ENTRIES, mirroring the invariant the code already asserts a few lines below (and which the CRTC path enforces). The AMD_PLANE_DEGAMMA_LUT property is only exposed on builds with AMD_PRIVATE_COLOR defined. | high | 2026-09-16 |
| CVE-2026-89818 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: fix integer overflow in dec_msg buffer count check If the supplied msg[2] (num_buffers) is 0x3FFFFFFF, the expression 6 + num_buffers * 4 wraps to 2 and the bounds check passes, letting the parser loop far past the end of the message BO. Triggering it additionally requires a ~4GiB mapping so that msg[1] survives the earlier "header does not fit in BO" check. Rewrite the test in division form, which is overflow-free by construction. Also update the message to reflect that msg is invalid. | high | 2026-09-16 |
| CVE-2026-89817 | In the Linux kernel, the following vulnerability has been resolved: drm/gud: NUL-terminate TV mode names read from the device gud_connector_add_tv_mode() reads a buffer of fixed-size mode names from the USB device and passes pointers into it to drm_mode_create_tv_properties_legacy(), which calls strlen() on each one. Nothing guarantees the device NUL-terminates a name, so strlen() can run past the end of a slot and, for the last mode, past the end of the allocation. Terminate each name at the end of its slot before use. | high | 2026-09-16 |
| CVE-2026-89816 | In the Linux kernel, the following vulnerability has been resolved: drm: Fix drm_crtc_commit leak if signaled when PAGE_FLIP_EVENT is used Commit 1c6ceeee6ebb ("drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits") fixed a very similar issue when the event was allocated by drm_atomic_helper_setup_commit() itself. However, if the event is allocated in prepare_signaling(), it will also be set to NULL in complete_signaling(), which prevents drm_crtc_commit from being put in __drm_atomic_helper_crtc_destroy_state(). Dropping the reference when the event is set to NULL at complete_signaling() fixes the leak. The leak can be reproduced by sending a signal to the thread using DRM_MODE_PAGE_FLIP_EVENT and using a sw_sync fence to cause the atomic ioctl to block at drm_atomic_helper_wait_for_fences(). It happened both with amdgpu and vkms. | medium | 2026-09-16 |
| CVE-2026-89815 | In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Drop tt->restore after successful restore ttm_pool_restore_and_alloc() can successfully complete the restore process via ttm_pool_restore_commit(), but tt->restore is not dropped afterward. As a result, subsequent backup/restore flows observe what appears to be a completed restore, while in reality shmem handles are still installed in tt->pages, leading to the stack trace below. Fix this by freeing and dropping tt->restore in ttm_pool_restore_and_alloc() upon successful completion of the restore. 20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490 20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206 20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000 20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000 20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000 20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000 20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001 20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000 20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0 20556 [ 309.871678] PKRU: 55555558 20557 [ 309.874403] Call Trace: 20558 [ 309.876866] <TASK> 20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100 20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm] 20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe] 20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe] 20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe] 20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm] 20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm] 20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe] 20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe] 20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm] 20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec] 20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe] 20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe] 20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm] 20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe] 20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe] 20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0 20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe] 20577 [ 309.962449] ? __wake_up_common+0x73/0xa0 20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe] 20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100 20580 [ 309.975209] drm_ioctl+0x213/0x440 20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe] 20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe] 20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 | high | 2026-09-16 |
| CVE-2026-89814 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clamp the isolation index for rings outside a partition adev->isolation[] has one slot per partition, but a ring that is not assigned to one keeps AMDGPU_XCP_NO_PARTITION, which is ~0, so indexing the array with it is out of bounds. SDMA submissions hit this on both the isolation enforcement and the VM flush path and trip UBSAN. Fall back to the first slot the way the cleaner shader path already does, and stop taking the address before the ring type check that makes it relevant. | high | 2026-09-16 |
| CVE-2026-89813 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the KIQ ring fences on reset Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a polling fence, so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a reset the first KIQ submission can poll forever on a seq that is never written back. Force complete the KIQ ring fences too so their hw fence is realigned to sync_seq. | medium | 2026-09-16 |
| CVE-2026-89812 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the MES ring fences on reset The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1 reset, while fence_drv.sync_seq keeps advancing for every packet. When the reset is triggered because MES itself stopped responding, the timed-out packets advance sync_seq past the last hw fence value MES wrote. After resume the first MES submission polls forever on a seq that is never written back, failing the resume and wedging the box on a second reset: amdgpu: MES ring buffer is full. amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110) amdgpu: resume of IP block <gfx_v11_0> failed -110 amdgpu: GPU reset end with ret = -110 Force complete the MES scheduler ring fences together with the scheduler rings so their hw fence is realigned to sync_seq. v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. | medium | 2026-09-16 |
| CVE-2026-89811 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add TLB flush after MES queue eviction/suspension MES (Micro Engine Scheduler) does not perform heavy-weight TLB invalidation after unmapping queues, unlike HWS which does this automatically. This causes a race condition where in-flight DMA descriptors can access memory that has been unmapped, leading to page faults and GPU queue hangs during SVM page migration. The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU compute queue hangs with packets submitted but never consumed. Add kfd_flush_tlb() calls after MES queue removal in two locations: - evict_process_queues_cpsch(): after all queues removed during eviction - suspend_queues(): after debug/criu queue suspension (with mem_fence barrier) This ensures all in-flight memory accesses from unmapped queues are flushed before memory is freed or migrated. (cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) | high | 2026-09-16 |
| CVE-2026-89810 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix error path at svm_migrate_copy_to_ram If page migration from device to sys ram fails for some reasons driver needs release and unlock allocated system pages. To do that driver should use page physical address, or pfn, then get struct page*. Current driver uses dma address(for adev) that is not correct with IOMMU enabled, or even in general. The patch releases and unlocks allocated system pages based on where migration failed by struct page* of sys ram pages. Also dma_unmap correspodent system ram pages at error path. | high | 2026-09-16 |
| CVE-2026-89809 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD queue triggers a NULL pointer dereference because the for loop that calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the if (pqn->q) block that initializes mqd_mgr. The queue list can contain entries where pqn->q is NULL (kernel queues where only pqn->kq is valid). In the original code: if (pqn->q) { ... mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type]; size = mqd_mgr->mqd_stride(...); } for (xcc = 0; xcc < num_xccs; xcc++) { // WRONG: outside if block mqd = q->mqd + size * xcc; r = mqd_mgr->debugfs_show_mqd(m, mqd); } When iterating over a queue node where pqn->q is NULL: 1. The if (pqn->q) block is skipped 2. mqd_mgr remains uninitialized (NULL from declaration) 3. The for loop executes anyway 4. mqd_mgr->debugfs_show_mqd(m, mqd) dereferences NULL The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode RIP: 0010:0x0 Call Trace: pqm_debugfs_mqds+0x10c/0x1d0 [amdgpu] kfd_debugfs_mqds_by_process+0x9b/0x110 [amdgpu] seq_read_iter+0x132/0x4b0 ... Fix by moving the for loop inside the if (pqn->q) block, so mqd_mgr and related variables are only used when properly initialized. (cherry picked from commit 8bfe29d5c798940f797aa24135d2734c3ffce9de) | medium | 2026-09-16 |
| CVE-2026-89808 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram When migration vm range is hole at cpu side(MIGRATE_PFN_MIGRATE set + MIGRATE_PFN_VALID unset) driver still allocates device pages. There is no dma map of src pages and migration. j is 0 and svm_migrate_copy_memory_gart() will return an uninitialized r. That can trigger out_free_vram_pages to drop all VRAM just set up. Initialize r and only call the last svm_migrate_copy_memory_gart if j > 0. Current code postponed the last page to the final copy. This patch flushes on the last page when reach to the end of current drm_buddy_block; avoids another svm_migrate_copy_memory_gart. | high | 2026-09-16 |
| CVE-2026-89807 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore Both create_queue_cpsch() and create_queue_nocpsch() unconditionally call mqd_mgr->restore_mqd() when a CRIU restore is in progress (qd != NULL), with no NULL guard. On any system where restore_mqd is not implemented for the given queue type, a user holding CAP_CHECKPOINT_RESTORE can trigger a kernel NULL pointer dereference and panic the machine by issuing KFD_IOC_CRIU_OP_RESTORE with a crafted queue restore object. Note that checkpoint_mqd is likewise unimplemented on GFX12, so no legitimate CRIU image can reach this path — only a hand-crafted restore payload. Add a NULL guard for restore_mqd immediately after mqd_mgr is resolved, unwinding via the existing error labels and returning -EOPNOTSUPP if the callback is not implemented. This mirrors the existing checkpoint_mqd guard in checkpoint_mqd(). | medium | 2026-09-16 |
| CVE-2026-89806 | In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation The framebuffer size calculation `fb_size = linebytes * height` can overflow when both values are large (e.g., 46341 * 46341 > INT_MAX). Since linebytes and height are both int types, the multiplication is performed as int * int, which results in undefined behavior on overflow. Use check_mul_overflow() to detect and prevent this overflow, consistent with the approach used in simpledrm.c and corebootdrm.c. | high | 2026-09-16 |
| CVE-2026-89805 | In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Fix folio allocation fallback and use-after-put drm_pagemap_migrate_populate_ram_pfn() had two issues when populating RAM PFNs with higher-order folios: 1. The higher-order vma_alloc_folio()/folio_alloc() calls did not pass __GFP_NOWARN, so a THP allocation failure under memory pressure would spam the kernel log, and there was no fallback path despite a TODO comment stating one was needed. Add __GFP_NOWARN to the higher-order allocation and, on failure, fall back to order-0 allocations for the entire range originally covered by the failed higher-order allocation, leaving MIGRATE_PFN_COMPOUND unset for those PFNs. 2. In the free_pages error path, order was computed via folio_order(page_folio(page)) *after* put_page(page) had already dropped the reference, resulting in a use-after-free/put when that was the last reference on the page. Compute order before releasing the page. Introducing the fallback in 1. also requires the source page array handed to ->copy_to_ram() to be built differently. Both callers only populated the entry at the head of each source folio, relying on the copy callback to derive the rest of the folio from the order recorded in the matching drm_pagemap_addr. Once the destination has been demoted to order-0 folios the drm_pagemap_addr entries are per-page, so a source page is needed for every one of them; leaving them NULL makes the copy callback stop after the first page and the remainder of the range is never copied. The source folio is only split later, by migrate_vma_pages() / migrate_device_pages(), so its order cannot be used to detect the demotion - test the destination for MIGRATE_PFN_COMPOUND instead. Factor the array population out into drm_pagemap_migrate_populate_src_pages() and use it from both drm_pagemap_evict_to_ram() and __drm_pagemap_migrate_to_ram(). | high | 2026-09-16 |
| CVE-2026-89804 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: fix mismatched DMA unmap size for large folios Device-private THP migration maps migration buffers with page_size() and records that length in dma_info->size. For a compound folio page_size() is PAGE_SIZE << order, but two teardown sites still pass a literal PAGE_SIZE to dma_unmap_page(): - nouveau_dmem_migrate_to_ram() on the success path, and - nouveau_dmem_migrate_copy_one() on the copy-error path. For an order > 0 folio this unmaps less than was mapped, leaking the remainder of the IOMMU/IOVA mapping. The other unmap sites, in nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already use the saved size; use it here too. | high | 2026-09-16 |
| CVE-2026-89803 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: unsubscribe the channel-kill event before the fence context nouveau_channel_del() tears the fence context down first and only drops the channel-kill subscription later, in the middle of the nvif object teardown: if (chan->fence) nouveau_fence(chan->cli->drm)->context_del(chan); ... nvif_object_dtor(&chan->vram); nvif_event_dtor(&chan->kill); The subscribed handler is nouveau_channel_killed(), which calls nouveau_channel_kill() and from there nouveau_fence_context_kill() on chan->fence. A kill event delivered in that window takes fctx->lock and walks fctx->pending on a fence context that context_del() has already freed. Nothing reaches this below Fermi today, because the subscription is gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On Fermi and newer the window is real but narrow, since a kill has to land exactly while the channel is being destroyed. That is reason enough on its own, which is why this carries a Fixes: tag. The last patch in this series subscribes Tesla channels as well; nothing kills those today, so it does not widen the exposure now, but it is the groundwork for a recovery path that would, and the ordering is better fixed before that lands than alongside it. Drop the subscription before anything it depends on is torn down. | high | 2026-09-16 |
| CVE-2026-89802 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix NULL deref unwinding an OP_MAP_SPARSE op Each bind_job_op is zeroed by kzalloc_obj() in bind_job_op_from_uop(), and the OP_MAP_SPARSE case in nouveau_uvmm_bind_job_submit() only creates a region, so op->ops stays NULL for a successfully processed sparse map. If a later op in the same job fails, the reverse unwind loop revisits that op and calls drm_gpuva_ops_free(&uvmm->base, op->ops) unconditionally. drm_gpuva_ops_free() dereferences its argument right away (list_for_each_entry_safe on &ops->list), so a NULL op->ops oopses. The path is reachable by any render-node fd holder, since NOUVEAU_VM_BIND is DRM_RENDER_ALLOW. Guard the free with IS_ERR_OR_NULL(), as nouveau_uvmm_bind_job_cleanup() already does for the identical free. | critical | 2026-09-16 |
| CVE-2026-89801 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix premature region free on failed OP_UNMAP_SPARSE In nouveau_uvmm_bind_job_submit()'s OP_UNMAP_SPARSE arm, op->reg is set from nouveau_uvma_region_find(), which only looks the region up and takes no reference; a region's sole reference is its membership in uvmm->region_mt. Two failure paths leave op->reg set: the -ENOENT check when the region is busy, and the drm_gpuvm_sm_unmap_ops_create() failure. The sibling nouveau_uvmm_sm_unmap_prepare() failure just below clears op->reg; these two do not. unwind_continue steps back one op, so the failing op is skipped by the unwind loop and its op->reg stays set. nouveau_uvmm_bind_job_cleanup() then enters its if (op->reg) branch and calls nouveau_uvma_region_remove() and nouveau_uvma_region_put() on it, dropping the tree's sole reference and freeing a region this job never created. The comment above the cleanup loop documents the broken invariant: op->reg must be NULL on submit failure. This frees a live region on an unrelated failure, reachable single-job when drm_gpuvm_sm_unmap_ops_create() returns -ENOMEM; if another job owns the same region, its cleanup then removes and puts the freed region, a use-after-free. Clear op->reg on both failure paths. | high | 2026-09-16 |
| CVE-2026-89800 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: clear the dirty flag when unwinding an OP_UNMAP_SPARSE A successful OP_UNMAP_SPARSE marks its region dirty with nouveau_uvma_region_dirty() and defers the teardown to nouveau_uvmm_bind_job_cleanup(); it does not remove the region from uvmm->region_mt. If a later op in the job fails, the unwind path never clears reg->dirty (set in one place, cleared nowhere) and sets op->reg = NULL, so cleanup skips the teardown. The region is left in the tree with dirty set and its completion never signalled. Later binds over that range then fail permanently -- -ENOENT or -EINVAL from the dirty checks, or an unkillable wait_for_completion() in bind_validate_region() -- for the lifetime of the uvmm. Clear reg->dirty when the unwind reverts the sparse unmap, restoring the region to the state it was found in. | critical | 2026-09-16 |
| CVE-2026-89799 | In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in bpf_get_stackid The get_perf_callchain call needs disabled preemption plus we need it disabled as long as we access its returned trace entries buffer. Note the bpf_get_stackid_pe function is executed already with preemption disabled. | high | 2026-09-16 |
| CVE-2026-89798 | In the Linux kernel, the following vulnerability has been resolved: rpcrdma: arm rn_done before publishing the notification rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before storing the caller's callback in rn->rn_done. The xarray makes @rn reachable to rpcrdma_remove_one(), which walks rd_xa and invokes rn->rn_done(rn) for every registered notification. A device removal that races a fresh registration can therefore observe @rn with rn_done still NULL, because the notification objects are zero allocated by their owners, and call through a NULL function pointer. Store rn->rn_done before xa_alloc() publishes @rn. The xarray's store-side and load-side ordering then guarantees that any CPU which finds @rn in rd_xa also observes the armed callback. rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel for a completed registration, so the early store must not survive a failed registration. Clear rn_done again when xa_alloc() fails. Were it left set, the failed-accept cleanup path would call rpcrdma_rn_unregister() on an @rn that was never inserted, erasing an unrelated rd_xa slot and underflowing rd_kref. | critical | 2026-09-16 |
| CVE-2026-89797 | In the Linux kernel, the following vulnerability has been resolved: power: supply: ab8500_fg: fix use-after-free on remove ab8500_fg_remove() destroys the driver workqueue while the threaded interrupt handlers are still armed; they are devm-managed and freed only after ->remove() returns, so a handler that fires in that window queues work on the freed workqueue. Tear the workqueue down through devm instead, registering its cleanup after the power supply and before the interrupt requests. devm then frees the interrupts first, so the handlers can no longer queue work, before disabling the delayed and plain work items and destroying the workqueue. Disabling the items, rather than cancelling them, keeps them disabled so no producer (including the power-supply external_power_changed callback) can requeue them. Found by an in-house static analysis tool. | critical | 2026-09-16 |
| CVE-2026-89796 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid infinite kdamond_merge_regions() internal loop Patch series "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races", v1.1. Sashiko found a few issues in DAMON that could cause infinite loop, NULL dereference and monitoring results degradation. The first two sounds scary but the infinite loop happens only under unreasonable user setup. The NULL dereference is only in a unit test. Monitoring results degradation is trivial since it is only best-effort, and those happens from only unlikely races. Still those are bugs that better to fix if possible. Fix those. This patch (of 6): Due to online parameter update like events, the number of DAMON regions could be higher than the user-set upper limit. kdamond_merge_regions() repeats merge regions until the number meets the limit, while doubling the merge threshold up to the theoretical maximum threshold. It is tried only up to the theoretical maximum threshold because even the aggressive merging can fail from reducing the number of regions under the user-defined upper limit. For example, there could be many user-defined non-contiguous regions that cannot be merged. The threshold based loop break condition is evaluated by comparing the threshold for the next merging try against the theoretical maximum threshold. If max_thres is larger than UINT_MAX / 2, doubling the threshold could make it overflow, and bypass the loop break condition. In the case, if the number of regions cannot be reduced under the upper limit like explained above, the loop will run infinitely. Prevent the case by doing the break condition check before doubling the threshold. Also, prevent the threshold exceeding the maximum threshold, as it could overflow and apply the wrong merge threshold. This issue is unlikely to occur in real world, since having the max_thres higher than UINT_MAX / 2 require unrealistically large aggregation intervals compared to the sampling interval. Also, it requires an unrealistically large number of uncontiguous regions setup. Nonetheless, the consequence is bad and the fix is simple. The issue was discovered [1] by Sashiko. | medium | 2026-09-16 |
| CVE-2026-89795 | In the Linux kernel, the following vulnerability has been resolved: PCI: Allow per function PCI slots to fix slot reset on s390 On s390 systems, which use a machine level hypervisor, PCI devices are always accessed through a form of PCI pass-through which fundamentally operates on a per PCI function granularity. This is also reflected in the s390 PCI hotplug driver which creates hotplug slots for individual PCI functions. Its reset_slot() function, which is a wrapper for zpci_hot_reset_device(), thus also resets individual functions. Currently, the pci_create_slot() assigns the same pci_slot object to multifunction devices. This approach worked fine on s390 systems that only exposed virtual functions as individual PCI domains to the operating system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions") s390 supports exposing the topology of multifunction PCI devices by grouping them in a shared PCI domain. This creates a problem when resetting a function through the hotplug driver's slot_reset() interface. When attempting to reset a function through the hotplug driver, the shared slot assignment causes the wrong function to be reset instead of the intended one. It also leaks memory as we do create a pci_slot object for the function, but don't correctly free it in pci_slot_release(). Add a flag for struct pci_slot to allow per function PCI slots for functions managed through a hypervisor, which exposes individual PCI functions while retaining the topology. Since we can use all 8 bits for slot 'number' (for ARI devices), change slot 'number' u16 to account for special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. | high | 2026-09-16 |
| CVE-2026-89794 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: zero pipe read compound padding Compound response handling extends the last response iov to an eight-byte boundary. smb2_read_pipe() allocates only the payload size, so the alignment padding can expose up to seven bytes of uninitialized kernel heap memory. Allocate the aligned size and clear the unused tail before pinning the response buffer. | high | 2026-09-16 |
| CVE-2026-86585 | The lack of signature verification of firmware update packages in VEO and VEO-XS Wi-Fi monitors, in versions prior to 01.48.001, allows an attacker who controls the delivery of an update to install unauthorised firmware. | high | 2026-09-16 |
| CVE-2026-86107 | The VeloCloud Edge and Gateway exhibit an out-of-bounds write vulnerability when processing tunneled IP fragments between authenticated overlay neighbors. This vulnerability impacts the VeloCloud VCMP tunnel protocol only. A successful exploit can cause the affected process to terminate and restart, leading to a temporary disruption of traffic. Hosts on the internet that are unauthenticated and unable to form an overlay peer relationship can not trigger the vulnerable logic. | high | 2026-09-16 |
| CVE-2026-86106 | An unauthenticated actor with network access to the private HA interconnect may trigger sensitive HA peer functions without verification. This could result in elevated command execution on Edge units where HA is enabled. | high | 2026-09-16 |
| CVE-2026-14916 | A JWT signature verification vulnerability affects Kong components that perform JWT validation for MCP OAuth2 or DataKit integrations inside Kong API Gateway Enterprise. The affected code does not properly validate that the JWT signing algorithm is compatible with the type of key used for verification. As a result, an unauthenticated remote attacker may be able to craft a forged JWT that is incorrectly accepted as valid, leading to authentication bypass and potential compromise of confidentiality, integrity, and availability. | high | 2026-09-16 |
| CVE-2026-89793 | In the Linux kernel, the following vulnerability has been resolved: ublk: clear VM_MAYWRITE on read-only ublk char device mmap ublk_ch_mmap() rejects mmap requests with VM_WRITE set, but never clears VM_MAYWRITE on the resulting read-only mapping. This allows a userspace daemon to mmap the per-queue command buffer PROT_READ, then upgrade it to PROT_WRITE via mprotect(), since VM_MAYWRITE was never cleared. The command buffer holds struct ublksrv_io_desc entries that are kernel-written ABI; a writable mapping lets an unprivileged daemon process corrupt fields such as addr, op_flags, nr_sectors, and start_sector. Same bug class as the drm/panthor and drm/vc4 VM_MAYWRITE fixes, and the 2026-08-13 ptp/vmclock fix (a5edadbae57e). Verified via mprotect() PoC: before the fix, a PROT_READ mapping can be upgraded to PROT_READ|PROT_WRITE and a write into the command buffer corrupts io_desc fields (confirmed under KASAN). After the fix, mprotect() returns -EACCES. | high | 2026-09-16 |
| CVE-2026-86792 | Apache Airflow Apache Kafka provider versions 1.15.0 before 2.0.0 resolve dotted-path strings found in a Kafka connection's `extra` field into Python callables via `import_string`, with no allowlist, and hand them to the confluent-kafka client which invokes them. Deployments that have enabled the Kafka event producer — `dag_run_events_enabled` or `task_instance_events_enabled`, both disabled by default — build that client inside the scheduler process, so a user whose only privilege is editing Airflow connections gains arbitrary code execution in the control plane; the Airflow security model limits connection-configuration users to code execution on workers, not the scheduler. Deployments using Google Managed Kafka are not affected, because that code path overwrites any user-supplied `oauth_cb`; plain brokers and Amazon MSK are exposed. Users are recommended to upgrade to apache-airflow-providers-apache-kafka 2.0.0 or later, which adds an allowlist configuration option for connection-string callbacks. | high | 2026-09-16 |
| CVE-2026-86474 | The lack of TLS certificate validation when downloading firmware updates in VEO and VEO-XS Wi-Fi monitors, in versions prior to 01.48.001, allows an attacker to perform man-in-the-middle attacks on the update channel. | high | 2026-09-16 |
| CVE-2026-86466 | Apache Airflow FAB provider: the Authentik OAuth path in the FAB auth manager does not validate the issuer or audience claims of the id_token it accepts. An attacker holding a token that the same Authentik identity provider minted for a different client application can present it to Airflow and be authenticated as the user it names, because the audience claim is never checked. Affects deployments using the FAB auth manager with Authentik OAuth where the same Authentik instance also serves other applications; the attacker needs a valid token for any of those other applications, not for Airflow. CVE-2026-75156 corrected the same missing validation on the Azure AD path in this file; the Authentik path was left unchanged and is fixed here. Deployments that applied the CVE-2026-75156 fix and use Authentik must also upgrade for this one. Users of apache-airflow-providers-fab are recommended to upgrade to version 3.9.0 or later, which fixes the issue. | high | 2026-09-16 |
| CVE-2026-86443 | Cleartext storage of sensitive information in the DuoxMe application for Android, in versions prior to 4.3.4, allows an attacker with local access to the device to retrieve the credentials stored by the application and impersonate the user account. | medium | 2026-09-16 |
| CVE-2026-85628 | Transmission of the home Wi-Fi credentials without encryption during the pairing process between the DuoxMe application and VEO and VEO-XS Wi-Fi monitors, in versions prior to 4.3.4 of the application and 01.50.001 of the monitor firmware, allows an attacker on the Wi-Fi Direct network to intercept the network password. | high | 2026-09-16 |
