| CVE-2025-53670 | Jenkins Nouvola DiveCloud Plugin 1.08 and earlier stores DiveCloud API Keys and Credentials Encryption Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53669 | Jenkins VAddy Plugin 1.2.8 and earlier does not mask Vaddy API Auth Keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them. | medium |
| CVE-2025-53668 | Jenkins VAddy Plugin 1.2.8 and earlier stores Vaddy API Auth Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53667 | Jenkins Dead Man's Snitch Plugin 0.1 does not mask Dead Man's Snitch tokens displayed on the job configuration form, increasing the potential for attackers to observe and capture them. | medium |
| CVE-2025-53666 | Jenkins Dead Man's Snitch Plugin 0.1 stores Dead Man's Snitch tokens unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53665 | Jenkins Apica Loadtest Plugin 1.10 and earlier does not mask Apica Loadtest LTP authentication tokens displayed on the job configuration form, increasing the potential for attackers to observe and capture them. | medium |
| CVE-2025-53664 | Jenkins Apica Loadtest Plugin 1.10 and earlier stores Apica Loadtest LTP authentication tokens unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53663 | Jenkins IBM Cloud DevOps Plugin 2.0.16 and earlier stores SonarQube authentication tokens unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53662 | Jenkins IFTTT Build Notifier Plugin 1.2 and earlier stores IFTTT Maker Channel Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53661 | Jenkins Testsigma Test Plan run Plugin 1.6 and earlier does not mask Testsigma API keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them. | medium |
| CVE-2025-53660 | Jenkins QMetry Test Management Plugin 1.13 and earlier does not mask Qmetry Automation API Keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them. | medium |
| CVE-2025-53659 | Jenkins QMetry Test Management Plugin 1.13 and earlier stores Qmetry Automation API Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53658 | Jenkins Applitools Eyes Plugin 1.16.5 and earlier does not escape the Applitools URL on the build page, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission. | medium |
| CVE-2025-53657 | Jenkins ReadyAPI Functional Testing Plugin 1.11 and earlier does not mask SLM License Access Keys, client secrets, and passwords displayed on the job configuration form, increasing the potential for attackers to observe and capture them. | medium |
| CVE-2025-53656 | Jenkins ReadyAPI Functional Testing Plugin 1.11 and earlier stores SLM License Access Keys, client secrets, and passwords unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53655 | Jenkins Statistics Gatherer Plugin 2.0.3 and earlier does not mask the AWS Secret Key on the global configuration form, increasing the potential for attackers to observe and capture it. | medium |
| CVE-2025-53654 | Jenkins Statistics Gatherer Plugin 2.0.3 and earlier stores the AWS Secret Key unencrypted in its global configuration file on the Jenkins controller, where it can be viewed by users with access to the Jenkins controller file system. | medium |
| CVE-2025-53653 | Jenkins Aqua Security Scanner Plugin 3.2.8 and earlier stores Scanner Tokens for Aqua API unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. | medium |
| CVE-2025-53652 | Jenkins Git Parameter Plugin 439.vb_0e46ca_14534 and earlier does not validate that the Git parameter value submitted to the build matches one of the offered choices, allowing attackers with Item/Build permission to inject arbitrary values into Git parameters. | high |
| CVE-2025-53651 | Jenkins HTML Publisher Plugin 425 and earlier displays log messages that include the absolute paths of files archived during the Publish HTML reports post-build step, exposing information about the Jenkins controller file system in the build log. | medium |
| CVE-2025-53650 | Jenkins Credentials Binding Plugin 687.v619cb_15e923f and earlier does not properly mask (i.e., replace with asterisks) credentials present in exception error messages that are written to the build log. | medium |
| CVE-2025-49604 | Rejected reason: DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. | No Score |
| CVE-2025-44526 | Realtek RTL8762EKF-EVB RTL8762E SDK V1.4.0 was discovered to utilize insufficient permission checks on critical fields within Bluetooth Low Energy (BLE) data packets. This issue allows attackers to cause a Denial of Service (DoS) via a crafted LL_Length_Req packet. | medium |
| CVE-2025-44177 | A directory traversal vulnerability was discovered in White Star Software Protop version 4.4.2-2024-11-27, specifically in the /pt3upd/ endpoint. An unauthenticated attacker can remotely read arbitrary files on the underlying OS using encoded traversal sequences. | high |
| CVE-2025-7204 | In ConnectWise PSA versions older than 2025.9, a vulnerability exists where authenticated users could gain access to sensitive user information. Specific API requests were found to return an overly verbose user object, which included encrypted password hashes for other users. Authenticated users could then retrieve these hashes. An attacker or privileged user could then use these exposed hashes to conduct offline brute-force or dictionary attacks. Such attacks could lead to credential compromise, allowing unauthorized access to accounts, and potentially privilege escalation within the system. | medium |
| CVE-2025-53546 | Folo organizes feeds content into one timeline. Using pull_request_target on .github/workflows/auto-fix-lint-format-commit.yml can be exploited by attackers, since untrusted code can be executed having full access to secrets (from the base repo). By exploiting the vulnerability is possible to exfiltrate GITHUB_TOKEN which has high privileges. GITHUB_TOKEN can be used to completely overtake the repo since the token has content write privileges. This vulnerability is fixed in commit 585c6a591440cd39f92374230ac5d65d7dd23d6a. | critical |
| CVE-2025-52364 | Insecure Permissions vulnerability in Tenda CP3 Pro Firmware V22.5.4.93 allows the telnet service (telnetd) by default at boot via the initialization script /etc/init.d/eth.sh. This allows remote attackers to connect to the device s shell over the network, potentially without authentication if default or weak credentials are present | high |
| CVE-2025-2670 | IBM OpenPages 9.0 is vulnerable to information disclosure of sensitive information due to a weaker than expected security for certain REST end points related to workflow feature of OpenPages. An authenticated user is able to obtain certain information about Workflow related configuration and internal state. | medium |
| CVE-2025-1112 | IBM OpenPages with Watson 8.3 and 9.0 could allow an authenticated user to obtain sensitive information that should only be available to privileged users. | medium |
| CVE-2025-6514 | mcp-remote is exposed to OS command injection when connecting to untrusted MCP servers due to crafted input from the authorization_endpoint response URL | critical |
| CVE-2025-38264 | In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: sanitize request list handling Validate the request in nvme_tcp_handle_r2t() to ensure it's not part of any list, otherwise a malicious R2T PDU might inject a loop in request list processing. | high |
| CVE-2025-38263 | In the Linux kernel, the following vulnerability has been resolved: bcache: fix NULL pointer in cache_set_flush() 1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) || 1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) || 1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc", 1870 WQ_MEM_RECLAIM, 0)) || 1871 bch_journal_alloc(c) || 1872 bch_btree_cache_alloc(c) || 1873 bch_open_buckets_alloc(c) || 1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages))) 1875 goto err; ^^^^^^^^ 1876 ... 1883 return c; 1884 err: 1885 bch_cache_set_unregister(c); ^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1886 return NULL; 1887 } ... 2078 static const char *register_cache_set(struct cache *ca) 2079 { ... 2098 c = bch_cache_set_alloc(&ca->sb); 2099 if (!c) 2100 return err; ^^^^^^^^^^ ... 2128 ca->set = c; 2129 ca->set->cache[ca->sb.nr_this_dev] = ca; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ... 2138 return NULL; 2139 err: 2140 bch_cache_set_unregister(c); 2141 return err; 2142 } (1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and call bch_cache_set_unregister()(LINE#1885). (2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return. (3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the value to c->cache[], it means that c->cache[] is NULL. LINE#1624 - LINE#1665 is some codes about function of cache_set_flush(). As (1), in LINE#1885 call bch_cache_set_unregister() ---> bch_cache_set_stop() ---> closure_queue() -.-> cache_set_flush() (as below LINE#1624) 1624 static void cache_set_flush(struct closure *cl) 1625 { ... 1654 for_each_cache(ca, c, i) 1655 if (ca->alloc_thread) ^^ 1656 kthread_stop(ca->alloc_thread); ... 1665 } (4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the kernel crash occurred as below: [ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory [ 846.713242] bcache: register_bcache() error : failed to register device [ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered [ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8 [ 846.714790] PGD 0 P4D 0 [ 846.715129] Oops: 0000 [#1] SMP PTI [ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1 [ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018 [ 846.716451] Workqueue: events cache_set_flush [bcache] [ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache] [ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 0 ---truncated--- | medium |
| CVE-2025-38262 | In the Linux kernel, the following vulnerability has been resolved: tty: serial: uartlite: register uart driver in init When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called. | medium |
| CVE-2025-38261 | In the Linux kernel, the following vulnerability has been resolved: riscv: save the SR_SUM status over switches When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0 s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003 a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0 s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850 s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8 s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2 t5 : ffffffc4043cafba t6 : 0000000000040000 status: 0000000000000120 badaddr: 000000002749f0d0 cause: 000000000000000f Call Trace: [<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 [<ffffffe000005570>] ret_from_exception+0x0/0x14 Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace b5f8f9231dc87dda ]--- The issue comes from the put_user() in schedule_tail (kernel/sched/core.c) doing the following: asmlinkage __visible void schedule_tail(struct task_struct *prev) { ... if (current->set_child_tid) put_user(task_pid_vnr(current), current->set_child_tid); ... } the put_user() macro causes the code sequence to come out as follows: 1: __enable_user_access() 2: reg = task_pid_vnr(current); 3: *current->set_child_tid = reg; 4: __disable_user_access() The problem is that we may have a sleeping function as argument which could clear SR_SUM causing the panic above. This was fixed by evaluating the argument of the put_user() macro outside the user-enabled section in commit 285a76bb2cf5 ("riscv: evaluate put_user() arg before enabling user access")" In order for riscv to take advantage of unsafe_get/put_XXX() macros and to avoid the same issue we had with put_user() and sleeping functions we must ensure code flow can go through switch_to() from within a region of code with SR_SUM enabled and come back with SR_SUM still enabled. This patch addresses the problem allowing future work to enable full use of unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost on every access. Make switch_to() save and restore SR_SUM. | high |
| CVE-2025-38260 | In the Linux kernel, the following vulnerability has been resolved: btrfs: handle csum tree error with rescue=ibadroots correctly [BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree. | high |
| CVE-2025-38259 | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9335: Fix missing free of regulator supplies Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code. | medium |
| CVE-2025-38258 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write memcg_path_store() assigns a newly allocated memory buffer to filter->memcg_path, without deallocating the previously allocated and assigned memory buffer. As a result, users can leak kernel memory by continuously writing a data to memcg_path DAMOS sysfs file. Fix the leak by deallocating the previously set memory buffer. | high |
| CVE-2025-38257 | In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Prevent overflow in size calculation for memdup_user() Number of apqn target list entries contained in 'nr_apqns' variable is determined by userspace via an ioctl call so the result of the product in calculation of size passed to memdup_user() may overflow. In this case the actual size of the allocated area and the value describing it won't be in sync leading to various types of unpredictable behaviour later. Use a proper memdup_array_user() helper which returns an error if an overflow is detected. Note that it is different from when nr_apqns is initially zero - that case is considered valid and should be handled in subsequent pkey_handler implementations. Found by Linux Verification Center (linuxtesting.org). | high |
| CVE-2025-38256 | In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: fix folio unpinning syzbot complains about an unmapping failure: [ 108.070381][ T14] kernel BUG at mm/gup.c:71! [ 108.070502][ T14] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 108.123672][ T14] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250221-8.fc42 02/21/2025 [ 108.127458][ T14] Workqueue: iou_exit io_ring_exit_work [ 108.174205][ T14] Call trace: [ 108.175649][ T14] sanity_check_pinned_pages+0x7cc/0x7d0 (P) [ 108.178138][ T14] unpin_user_page+0x80/0x10c [ 108.180189][ T14] io_release_ubuf+0x84/0xf8 [ 108.182196][ T14] io_free_rsrc_node+0x250/0x57c [ 108.184345][ T14] io_rsrc_data_free+0x148/0x298 [ 108.186493][ T14] io_sqe_buffers_unregister+0x84/0xa0 [ 108.188991][ T14] io_ring_ctx_free+0x48/0x480 [ 108.191057][ T14] io_ring_exit_work+0x764/0x7d8 [ 108.193207][ T14] process_one_work+0x7e8/0x155c [ 108.195431][ T14] worker_thread+0x958/0xed8 [ 108.197561][ T14] kthread+0x5fc/0x75c [ 108.199362][ T14] ret_from_fork+0x10/0x20 We can pin a tail page of a folio, but then io_uring will try to unpin the head page of the folio. While it should be fine in terms of keeping the page actually alive, mm folks say it's wrong and triggers a debug warning. Use unpin_user_folio() instead of unpin_user_page*. [axboe: adapt to current tree, massage commit message] | medium |
| CVE-2025-38255 | In the Linux kernel, the following vulnerability has been resolved: lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly() While testing null_blk with configfs, echo 0 > poll_queues will trigger following panic: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 27 UID: 0 PID: 920 Comm: bash Not tainted 6.15.0-02023-gadbdb95c8696-dirty #1238 PREEMPT(undef) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__bitmap_or+0x48/0x70 Call Trace: <TASK> __group_cpus_evenly+0x822/0x8c0 group_cpus_evenly+0x2d9/0x490 blk_mq_map_queues+0x1e/0x110 null_map_queues+0xc9/0x170 [null_blk] blk_mq_update_queue_map+0xdb/0x160 blk_mq_update_nr_hw_queues+0x22b/0x560 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_poll_queues_store+0xa4/0x130 [null_blk] configfs_write_iter+0x109/0x1d0 vfs_write+0x26e/0x6f0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x45c4/0x45f0 do_syscall_64+0xa5/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that numgrps is set to 0, and ZERO_SIZE_PTR is returned from kcalloc(), and later ZERO_SIZE_PTR will be deferenced. Fix the problem by checking numgrps first in group_cpus_evenly(), and return NULL directly if numgrps is zero. [[email protected]: also fix the non-SMP version] | medium |
| CVE-2025-38254 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add sanity checks for drm_edid_raw() When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to return proper EDID bytes the caller wants: it may be either NULL (that leads to an Oops) or with too long bytes over the fixed size raw_edid array (that may lead to memory corruption). The latter was reported actually when connected with a bad adapter. Add sanity checks for drm_edid_raw() to address the above corner cases, and return EDID_BAD_INPUT accordingly. (cherry picked from commit 648d3f4d209725d51900d6a3ed46b7b600140cdf) | high |
| CVE-2025-38253 | In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix crash in wacom_aes_battery_handler() Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended inactivity") introduced wacom_aes_battery_handler() which is scheduled as a delayed work (aes_battery_work). In wacom_remove(), aes_battery_work is not canceled. Consequently, if the device is removed while aes_battery_work is still pending, then hard crashes or "Oops: general protection fault..." are experienced when wacom_aes_battery_handler() is finally called. E.g., this happens with built-in USB devices after resume from hibernate when aes_battery_work was still pending at the time of hibernation. So, take care to cancel aes_battery_work in wacom_remove(). | medium |
| CVE-2025-38252 | In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix CPER handler device confusion By inspection, cxl_cper_handle_prot_err() is making a series of fragile assumptions that can lead to crashes: 1/ It assumes that endpoints identified in the record are a CXL-type-3 device, nothing guarantees that. 2/ It assumes that the device is bound to the cxl_pci driver, nothing guarantees that. 3/ Minor, it holds the device lock over the switch-port tracing for no reason as the trace is 100% generated from data in the record. Correct those by checking that the PCIe endpoint parents a cxl_memdev before assuming the format of the driver data, and move the lock to where it is required. Consequently this also makes the implementation ready for CXL accelerators that are not bound to cxl_pci. | medium |
| CVE-2025-38251 | In the Linux kernel, the following vulnerability has been resolved: atm: clip: prevent NULL deref in clip_push() Blamed commit missed that vcc_destroy_socket() calls clip_push() with a NULL skb. If clip_devs is NULL, clip_push() then crashes when reading skb->truesize. | medium |
| CVE-2025-38250 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix use-after-free in vhci_flush() syzbot reported use-after-free in vhci_flush() without repro. [0] From the splat, a thread close()d a vhci file descriptor while its device was being used by iotcl() on another thread. Once the last fd refcnt is released, vhci_release() calls hci_unregister_dev(), hci_free_dev(), and kfree() for struct vhci_data, which is set to hci_dev->dev->driver_data. The problem is that there is no synchronisation after unlinking hdev from hci_dev_list in hci_unregister_dev(). There might be another thread still accessing the hdev which was fetched before the unlink operation. We can use SRCU for such synchronisation. Let's run hci_dev_reset() under SRCU and wait for its completion in hci_unregister_dev(). Another option would be to restore hci_dev->destruct(), which was removed in commit 587ae086f6e4 ("Bluetooth: Remove unused hci-destruct cb"). However, this would not be a good solution, as we should not run hci_unregister_dev() while there are in-flight ioctl() requests, which could lead to another data-race KCSAN splat. Note that other drivers seem to have the same problem, for exmaple, virtbt_remove(). [0]: BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718 CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 skb_queue_purge include/linux/skbuff.h:3368 [inline] vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69 hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline] hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592 sock_do_ioctl+0xd9/0x300 net/socket.c:1190 sock_ioctl+0x576/0x790 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcf5b98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929 RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009 RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528 </TASK> Allocated by task 6535: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635 misc_open+0x2bc/0x330 drivers/char/misc.c:161 chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414 do_dentry_open+0xdf0/0x1970 fs/open.c:964 vfs_open+0x3b/0x340 fs/open.c:1094 do_open fs/namei.c:3887 [inline] path_openat+0x2ee5/0x3830 fs/name ---truncated--- | high |
| CVE-2025-38249 | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor. | medium |
| CVE-2025-38248 | In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack ---truncated--- | medium |
| CVE-2025-38247 | In the Linux kernel, the following vulnerability has been resolved: userns and mnt_idmap leak in open_tree_attr(2) Once want_mount_setattr() has returned a positive, it does require finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr() does not change that. As the result, we can end up leaking userns and possibly mnt_idmap as well. | high |
| CVE-2025-38246 | In the Linux kernel, the following vulnerability has been resolved: bnxt: properly flush XDP redirect lists We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456 ---truncated--- | medium |
| CVE-2025-38245 | In the Linux kernel, the following vulnerability has been resolved: atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister(). syzbot reported a warning below during atm_dev_register(). [0] Before creating a new device and procfs/sysfs for it, atm_dev_register() looks up a duplicated device by __atm_dev_lookup(). These operations are done under atm_dev_mutex. However, when removing a device in atm_dev_deregister(), it releases the mutex just after removing the device from the list that __atm_dev_lookup() iterates over. So, there will be a small race window where the device does not exist on the device list but procfs/sysfs are still not removed, triggering the splat. Let's hold the mutex until procfs/sysfs are removed in atm_dev_deregister(). [0]: proc_dir_entry 'atm/atmtcp:0' already registered WARNING: CPU: 0 PID: 5919 at fs/proc/generic.c:377 proc_register+0x455/0x5f0 fs/proc/generic.c:377 Modules linked in: CPU: 0 UID: 0 PID: 5919 Comm: syz-executor284 Not tainted 6.16.0-rc2-syzkaller-00047-g52da431bf03b #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 RIP: 0010:proc_register+0x455/0x5f0 fs/proc/generic.c:377 Code: 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 a2 01 00 00 48 8b 44 24 10 48 c7 c7 20 c0 c2 8b 48 8b b0 d8 00 00 00 e8 0c 02 1c ff 90 <0f> 0b 90 90 48 c7 c7 80 f2 82 8e e8 0b de 23 09 48 8b 4c 24 28 48 RSP: 0018:ffffc9000466fa30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817ae248 RDX: ffff888026280000 RSI: ffffffff817ae255 RDI: 0000000000000001 RBP: ffff8880232bed48 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff888076ed2140 R13: dffffc0000000000 R14: ffff888078a61340 R15: ffffed100edda444 FS: 00007f38b3b0c6c0(0000) GS:ffff888124753000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f38b3bdf953 CR3: 0000000076d58000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_create_data+0xbe/0x110 fs/proc/generic.c:585 atm_proc_dev_register+0x112/0x1e0 net/atm/proc.c:361 atm_dev_register+0x46d/0x890 net/atm/resources.c:113 atmtcp_create+0x77/0x210 drivers/atm/atmtcp.c:369 atmtcp_attach drivers/atm/atmtcp.c:403 [inline] atmtcp_ioctl+0x2f9/0xd60 drivers/atm/atmtcp.c:464 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x115/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f38b3b74459 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f38b3b0c198 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f38b3bfe318 RCX: 00007f38b3b74459 RDX: 0000000000000000 RSI: 0000000000006180 RDI: 0000000000000005 RBP: 00007f38b3bfe310 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f38b3bcb0ac R13: 00007f38b3b0c1a0 R14: 0000200000000200 R15: 00007f38b3bcb03b </TASK> | high |
