| CVE-2026-23277 | In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit through slave devices, but does not update skb->dev to the slave device beforehand. When a gretap tunnel is a TEQL slave, the transmit path reaches iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0 master) and later calls iptunnel_xmit_stats(dev, pkt_len). This function does: get_cpu_ptr(dev->tstats) Since teql_master_setup() does not set dev->pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes NULL + __per_cpu_offset[cpu], resulting in a page fault. BUG: unable to handle page fault for address: ffff8880e6659018 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 68bc067 P4D 68bc067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89) Call Trace: <TASK> ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) __gre_xmit (net/ipv4/ip_gre.c:478) gre_tap_xmit (net/ipv4/ip_gre.c:779) teql_master_xmit (net/sched/sch_teql.c:319) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) neigh_direct_output (net/core/neighbour.c:1660) ip_finish_output2 (net/ipv4/ip_output.c:237) __ip_finish_output.part.0 (net/ipv4/ip_output.c:315) ip_mc_output (net/ipv4/ip_output.c:369) ip_send_skb (net/ipv4/ip_output.c:1508) udp_send_skb (net/ipv4/udp.c:1195) udp_sendmsg (net/ipv4/udp.c:1485) inet_sendmsg (net/ipv4/af_inet.c:859) __sys_sendto (net/socket.c:2206) Fix this by setting skb->dev = slave before calling netdev_start_xmit(), so that tunnel xmit functions see the correct slave device with properly allocated tstats. | medium | 2026-03-25 |
| CVE-2026-23276 | In the Linux kernel, the following vulnerability has been resolved: net: add xmit recursion limit to tunnel xmit functions Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own recursion limit. When a bond device in broadcast mode has GRE tap interfaces as slaves, and those GRE tunnels route back through the bond, multicast/broadcast traffic triggers infinite recursion between bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing kernel stack overflow. The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not sufficient because tunnel recursion involves route lookups and full IP output, consuming much more stack per level. Use a lower limit of 4 (IP_TUNNEL_RECURSION_LIMIT) to prevent overflow. Add recursion detection using dev_xmit_recursion helpers directly in iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.). Move dev_xmit_recursion helpers from net/core/dev.h to public header include/linux/netdevice.h so they can be used by tunnel code. BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160 Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11 Workqueue: mld mld_ifc_work Call Trace: <TASK> __build_flow_key.constprop.0 (net/ipv4/route.c:515) ip_rt_update_pmtu (net/ipv4/route.c:1073) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) mld_sendpack mld_ifc_work process_one_work worker_thread </TASK> | medium | 2026-03-25 |
| CVE-2026-23275 | In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper. | high | 2026-04-02 |
| CVE-2026-23274 | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels IDLETIMER revision 0 rules reuse existing timers by label and always call mod_timer() on timer->timer. If the label was created first by revision 1 with XT_IDLETIMER_ALARM, the object uses alarm timer semantics and timer->timer is never initialized. Reusing that object from revision 0 causes mod_timer() on an uninitialized timer_list, triggering debugobjects warnings and possible panic when panic_on_warn=1. Fix this by rejecting revision 0 rule insertion when an existing timer with the same label is of ALARM type. | high | 2026-04-02 |
| CVE-2026-23273 | In the Linux kernel, the following vulnerability has been resolved: macvlan: observe an RCU grace period in macvlan_common_newlink() error path valis reported that a race condition still happens after my prior patch. macvlan_common_newlink() might have made @dev visible before detecting an error, and its caller will directly call free_netdev(dev). We must respect an RCU period, either in macvlan or the core networking stack. After adding a temporary mdelay(1000) in macvlan_forward_source_one() to open the race window, valis repro was: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source (ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4 PING 1.2.3.4 (1.2.3.4): 56 data bytes RTNETLINK answers: Invalid argument BUG: KASAN: slab-use-after-free in macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) Read of size 8 at addr ffff888016bb89c0 by task e/175 CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) kasan_report (mm/kasan/report.c:597) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) ? tasklet_init (kernel/softirq.c:983) macvlan_handle_frame (drivers/net/macvlan.c:501) Allocated by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) __kasan_kmalloc (mm/kasan/common.c:419) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657 mm/slub.c:7140) alloc_netdev_mqs (net/core/dev.c:12012) rtnl_create_link (net/core/rtnetlink.c:3648) rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Freed by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kfree (mm/slub.c:6674 mm/slub.c:6882) rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) | high | 2026-04-02 |
| CVE-2026-23272 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally bump set->nelems before insertion In case that the set is full, a new element gets published then removed without waiting for the RCU grace period, while RCU reader can be walking over it already. To address this issue, add the element transaction even if set is full, but toggle the set_full flag to report -ENFILE so the abort path safely unwinds the set to its previous state. As for element updates, decrement set->nelems to restore it. A simpler fix is to call synchronize_rcu() in the error path. However, with a large batch adding elements to already maxed-out set, this could cause noticeable slowdown of such batches. | high | 2026-04-02 |
| CVE-2026-23271 | In the Linux kernel, the following vulnerability has been resolved: perf: Fix __perf_event_overflow() vs perf_remove_from_context() race Make sure that __perf_event_overflow() runs with IRQs disabled for all possible callchains. Specifically the software events can end up running it with only preemption disabled. This opens up a race vs perf_event_exit_event() and friends that will go and free various things the overflow path expects to be present, like the BPF program. | high | 2026-04-02 |
| CVE-2026-33191 | Free5GC is an open-source Linux Foundation project for 5th generation (5G) mobile core networks. Versions prior to 1.4.2 are vulnerable to null byte injection in URL path parameters. A remote attacker can inject null bytes (URL-encoded as %00) into the supi path parameter of the UDM's Nudm_SubscriberDataManagement API. This causes URL parsing failure in Go's net/url package with the error "invalid control character in URL", resulting in a 500 Internal Server Error. This null byte injection vulnerability can be exploited for denial of service attacks. When the supi parameter contains null characters, the UDM attempts to construct a URL for UDR that includes these control characters. Go's URL parser rejects them, causing the request to fail with 500 instead of properly validating input and returning 400 Bad Request. This issue has been fixed in version 1.4.2. | high | 2026-03-23 |
| CVE-2026-33065 | Free5GC is an open-source Linux Foundation project for 5th generation (5G) mobile core networks. In versions prior to 1.4.2, the UDM incorrectly converts a downstream 400 Bad Request (from UDR) into a 500 Internal Server Error when handling DELETE requests with an empty supi path parameter. This leaks internal error handling behavior and makes it difficult for clients to distinguish between client-side errors and server-side failures. When a client sends a DELETE request with an empty supi (e.g., double slashes // in URL path), the UDM forwards the malformed request to UDR, which correctly returns 400. However, UDM propagates this as 500 SYSTEM_FAILURE instead of returning the appropriate 400 error to the client. This violates REST API best practices for DELETE operations. The issue has been patched in version 1.4.2. | medium | 2026-03-23 |
| CVE-2026-33064 | Free5GC is an open-source Linux Foundation project for 5th generation (5G) mobile core networks. Versions prior to 1.4.2 are vulnerable to procedure panic caused by Nil Pointer Dereference in the /sdm-subscriptions endpoint. A remote attacker can cause the UDM service to panic and crash by sending a crafted POST request to the /sdm-subscriptions endpoint with a malformed URL path containing path traversal sequences (../) and a large JSON payload. The DataChangeNotificationProcedure function in notifier.go attempts to access a nil pointer without proper validation, causing a complete service crash with "runtime error: invalid memory address or nil pointer dereference". Exploitation would result in UDM functionality disruption until recovery by restart. This issue has been fixed in version 1.4.2. | high | 2026-03-23 |
| CVE-2026-33061 | Jexactyl is a customisable game management panel and billing system. Commits after 025e8dbb0daaa04054276bda814d922cf4af58da and before e28edb204e80efab628d1241198ea4f079779cfd inject server-side objects into client-side JavaScript through resources/views/templates/wrapper.blade.php. Using unescaped {!! json_encode(...) !!} without safe encoding flags allows string values to break out of the JavaScript context and be interpreted as HTML/JS by the browser. If any serialized fields contain attacker-controlled content, such as a username, display name, or site config value, a malicious payload will execute arbitrary script for any user viewing the page (stored DOM XSS). This issue has been patched by commit e28edb204e80efab628d1241198ea4f079779cfd. | medium | 2026-03-30 |
| CVE-2026-33060 | CKAN MCP Server is a tool for querying CKAN open data portals. Versions prior to 0.4.85 provide tools including ckan_package_search and sparql_query that accept a base_url parameter, making HTTP requests to arbitrary endpoints without restriction. A CKAN portal client has no legitimate reason to contact cloud metadata or internal network services. There is no URL validation on base_url parameter. No private IP blocking (RFC 1918, link-local 169.254.x.x), no cloud metadata blocking. The sparql_query and ckan_datastore_search_sql tools also accept arbitrary base URLs and expose injection surfaces. An attack can lead to internal network scanning, cloud metadata theft (IAM credentials via IMDS at 169.254.169.254), potential SQL/SPARQL injection via unsanitized query parameters. Attack requires prompt injection to control the base_url parameter. This issue has been fixed in version 0.4.85. | medium | 2026-03-20 |
| CVE-2026-33057 | Mesop is a Python-based UI framework that allows users to build web applications. In versions 1.2.2 and below, an explicit web endpoint inside the ai/ testing module infrastructure directly ingests untrusted Python code strings unconditionally without authentication measures, yielding standard Unrestricted Remote Code Execution. Any individual capable of routing HTTP logic to this server block will gain explicit host-machine command rights. The AI codebase package includes a lightweight debugging Flask server inside ai/sandbox/wsgi_app.py. The /exec-py route accepts base_64 encoded raw string payloads inside the code parameter natively evaluated by a basic POST web request. It saves it rapidly to the operating system logic path and injects it recursively using execute_module(module_path...). This issue has been fixed in version 1.2.3. | critical | 2026-03-24 |
| CVE-2026-33056 | tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Because fs::metadata() follows symbolic links, a crafted tarball containing a symlink entry followed by a directory entry with the same name causes the crate to treat the symlink target as a valid existing directory — and subsequently apply chmod to it. This allows an attacker to modify the permissions of arbitrary directories outside the extraction root. This issue has been fixed in version 0.4.45. | medium | 2026-03-24 |
| CVE-2026-33022 | Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Versions 0.60.0 through 1.0.0, 1.1.0 through 1.3.2, 1.4.0 through 1.6.0, 1.7.0 through 1.9.0, 1.10.0, and 1.10.1 have a denial-of-service vulnerability in that allows any user who can create a TaskRun or PipelineRun to crash the controller cluster-wide by setting .spec.taskRef.resolver (or .spec.pipelineRef.resolver) to a string of 31+ characters. The crash occurs because GenerateDeterministicNameFromSpec produces a name exceeding the 63-character DNS-1123 label limit, and its truncation logic panics on a [-1] slice bound since the generated name contains no spaces. Once crashed, the controller enters a CrashLoopBackOff on restart (as it re-reconciles the offending resource), blocking all CI/CD reconciliation until the resource is manually deleted. Built-in resolvers (git, cluster, bundles, hub) are unaffected due to their short names, but any custom resolver name triggers the bug. The fix truncates the resolver-name prefix instead of the full string, preserving the hash suffix for determinism and uniqueness. This issue has been patched in versions 1.0.1, 1.3.3, 1.6.1, 1.9.2 and 1.10.2. | medium | 2026-03-24 |
| CVE-2026-4478 | A vulnerability was identified in Yi Technology YI Home Camera 2 2.1.1_20171024151200. This impacts an unknown function of the file home/web/ipc of the component HTTP Firmware Update Handler. The manipulation leads to improper verification of cryptographic signature. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is said to be difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | critical | 2026-03-20 |
| CVE-2026-4477 | A vulnerability was determined in Yi Technology YI Home Camera 2 2.1.1_20171024151200. This affects an unknown function of the component WPA/WPS. Executing a manipulation can lead to use of hard-coded cryptographic key . The attack can only be done within the local network. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | low | 2026-03-20 |
| CVE-2026-4476 | A vulnerability was found in Yi Technology YI Home Camera 2 2.1.1_20171024151200. The impacted element is an unknown function of the file home/web/ipc of the component CGI Endpoint. Performing a manipulation results in missing authentication. Access to the local network is required for this attack. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | medium | 2026-03-20 |
| CVE-2026-4475 | A vulnerability has been found in Yi Technology YI Home Camera 2 2.1.1_20171024151200. The affected element is an unknown function of the file home/web/ipc. Such manipulation leads to hard-coded credentials. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | high | 2026-03-20 |
| CVE-2026-4474 | A flaw has been found in itsourcecode University Management System 1.0. Impacted is an unknown function of the file /admin_single_student_update.php. This manipulation of the argument st_name causes cross site scripting. The attack may be initiated remotely. The exploit has been published and may be used. | medium | 2026-03-23 |
| CVE-2026-33055 | tar-rs is a tar archive reading/writing library for Rust. Versions 0.4.44 and below have conditional logic that skips the PAX size header in cases where the base header size is nonzero. As part of CVE-2025-62518, the astral-tokio-tar project was changed to correctly honor PAX size headers in the case where it was different from the base header. This is almost the inverse of the astral-tokio-tar issue. Any discrepancy in how tar parsers honor file size can be used to create archives that appear differently when unpacked by different archivers. In this case, the tar-rs (Rust tar) crate is an outlier in checking for the header size - other tar parsers (including e.g. Go archive/tar) unconditionally use the PAX size override. This can affect anything that uses the tar crate to parse archives and expects to have a consistent view with other parsers. This issue has been fixed in version 0.4.45. | medium | 2026-03-23 |
| CVE-2026-33054 | Mesop is a Python-based UI framework that allows users to build web applications. Versions 1.2.2 and below contain a Path Traversal vulnerability that allows any user supplying an untrusted state_token through the UI stream payload to arbitrarily target files on the disk under the standard file-based runtime backend. This can result in application denial of service (via crash loops when reading non-msgpack target files as configurations), or arbitrary file manipulation. This vulnerability heavily exposes systems hosted utilizing FileStateSessionBackend. Unauthorized malicious actors could interact with arbitrary payloads overwriting or explicitly removing underlying service resources natively outside the application bounds. This issue has been fixed in version 1.2.3. | critical | 2026-03-24 |
| CVE-2026-33053 | Langflow is a tool for building and deploying AI-powered agents and workflows. In versions prior to 1.9.0, the delete_api_key_route() endpoint accepts an api_key_id path parameter and deletes it with only a generic authentication check (get_current_active_user dependency). However, the delete_api_key() CRUD function does NOT verify that the API key belongs to the current user before deletion. | medium | 2026-03-20 |
| CVE-2026-4473 | A vulnerability was detected in itsourcecode Online Doctor Appointment System 1.0. This issue affects some unknown processing of the file /admin/appointment_action.php. The manipulation of the argument appointment_id results in sql injection. The attack can be launched remotely. The exploit is now public and may be used. | medium | 2026-03-23 |
| CVE-2026-33051 | Craft CMS is a content management system (CMS). In versions 5.9.0-beta.1 through 5.9.10, the revision/draft context menu in the element editor renders the creator’s fullName as raw HTML due to the use of Template::raw() combined with Craft::t() string interpolation. A low-privileged control panel user (e.g., Author) can set their fullName to an XSS payload via the profile editor, then create an entry with two saves. If an administrator is logged in and executes a specifically crafted payload while an elevated session is active, the attacker’s account can be elevated to administrator. This issue has been fixed in version 5.9.11. | medium | 2026-03-20 |
| CVE-2026-33043 | WWBN AVideo is an open source video platform. In versions 25.0 and below, /objects/phpsessionid.json.php exposes the current PHP session ID to any unauthenticated request. The allowOrigin() function reflects any Origin header back in Access-Control-Allow-Origin with Access-Control-Allow-Credentials: true, enabling cross-origin session theft and full account takeover. This issue has been fixed in version 26.0. | high | 2026-03-23 |
| CVE-2026-33041 | WWBN AVideo is an open source video platform. In versions 25.0 and below, /objects/encryptPass.json.php exposes the application's password hashing algorithm to any unauthenticated user. An attacker can submit arbitrary passwords and receive their hashed equivalents, enabling offline password cracking against leaked database hashes. If an attacker obtains password hashes from the database (via SQL injection, backup exposure, etc.), they can instantly crack them by comparing against pre-computed hashes from this endpoint. This endpoint eliminates the need for an attacker to reverse-engineer the hashing algorithm. Combined with the weak hash chain (md5+whirlpool+sha1, no salt by default), an attacker with access to database hashes can crack passwords extremely quickly. This issue was fixed in version 26.0. | medium | 2026-03-23 |
| CVE-2026-33040 | libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.49.3, the Gossipsub implementation accepts attacker-controlled PRUNE backoff values and may perform unchecked time arithmetic when storing backoff state. A specially crafted PRUNE control message with an extremely large backoff (e.g. u64::MAX) can lead to Duration/Instant overflow during backoff update logic, triggering a panic in the networking state machine. This is remotely reachable over a normal libp2p connection and does not require authentication. Any application exposing a libp2p Gossipsub listener and using the affected backoff-handling path can be crashed by a network attacker that can reach the service port. The attack can be repeated by reconnecting and replaying the crafted control message. This issue has been fixed in version 0.49.3. | high | 2026-03-23 |
| CVE-2026-33039 | WWBN AVideo is an open source video platform. In versions 25.0 and below, the plugin/LiveLinks/proxy.php endpoint validates user-supplied URLs against internal/private networks using isSSRFSafeURL(), but only checks the initial URL. When the initial URL responds with an HTTP redirect (Location header), the redirect target is fetched via fakeBrowser() without re-validation, allowing an attacker to reach internal services (cloud metadata, RFC1918 addresses) through an attacker-controlled redirect. This issue is fixed in version 26.0. | high | 2026-03-23 |
| CVE-2026-33038 | WWBN AVideo is an open source video platform. Versions 25.0 and below are vulnerable to unauthenticated application takeover through the install/checkConfiguration.php endpoint. install/checkConfiguration.php performs full application initialization: database setup, admin account creation, and configuration file write, all from an unauthenticated POST input. The only guard is checking whether videos/configuration.php already exists. On uninitialized deployments, any remote attacker can complete the installation with attacker-controlled credentials and an attacker-controlled database, gaining full administrative access. This issue has been fixed in version 26.0. | high | 2026-03-23 |
| CVE-2026-33037 | WWBN AVideo is an open source video platform. In versions 25.0 and below, the official Docker deployment files (docker-compose.yml, env.example) ship with the admin password set to "password", which is automatically used to seed the admin account during installation, meaning any instance deployed without overriding SYSTEM_ADMIN_PASSWORD is immediately vulnerable to trivial administrative takeover. No compensating controls exist: there is no forced password change on first login, no complexity validation, no default-password detection, and the password is hashed with weak MD5. Full admin access enables user data exposure, content manipulation, and potential remote code execution via file uploads and plugin management. The same insecure-default pattern extends to database credentials (avideo/avideo), compounding the risk. Exploitation depends on operators failing to change the default, a condition likely met in quick-start, demo, and automated deployments. This issue has been fixed in version 26.0. | high | 2026-03-23 |
| CVE-2026-33036 | fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. Versions 4.0.0-beta.3 through 5.5.5 contain a bypass vulnerability where numeric character references (&#NNN;, &#xHH;) and standard XML entities completely evade the entity expansion limits (e.g., maxTotalExpansions, maxExpandedLength) added to fix CVE-2026-26278, enabling XML entity expansion Denial of Service. The root cause is that replaceEntitiesValue() in OrderedObjParser.js only enforces expansion counting on DOCTYPE-defined entities while the lastEntities loop handling numeric/standard entities performs no counting at all. An attacker supplying 1M numeric entity references like A can force ~147MB of memory allocation and heavy CPU usage, potentially crashing the process—even when developers have configured strict limits. This issue has been fixed in version 5.5.6. | high | 2026-03-23 |
| CVE-2026-32768 | Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. In versions prior to 0.6.5, due to a miswritten NetworkPolicy, a malicious actor can pivot from an instance to any Pod out of the origin namespace. This breaks the security-by-default property expected as part of the deployment program, leading to a potential lateral movement. In the specific case of sdk/kubernetes.Kompose it does not isolate the instances. This issue has been fixed in version 0.6.5. | high | 2026-04-08 |
| CVE-2026-4472 | A security vulnerability has been detected in itsourcecode Online Frozen Foods Ordering System 1.0. This vulnerability affects unknown code of the file /admin/admin_edit_supplier.php. The manipulation of the argument Supplier_Name leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. | medium | 2026-03-23 |
| CVE-2026-4471 | A weakness has been identified in itsourcecode Online Frozen Foods Ordering System 1.0. This affects an unknown part of the file /admin/admin_edit_employee.php. Executing a manipulation of the argument First_Name can lead to sql injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. | medium | 2026-03-23 |
| CVE-2026-4470 | A security flaw has been discovered in itsourcecode Online Frozen Foods Ordering System 1.0. Affected by this issue is some unknown functionality of the file /admin/admin_edit_menu.php. Performing a manipulation of the argument product_name results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. | medium | 2026-03-23 |
| CVE-2026-4469 | A vulnerability was identified in itsourcecode Online Frozen Foods Ordering System 1.0. Affected by this vulnerability is an unknown functionality of the file /admin/admin_edit_menu_action.php. Such manipulation of the argument product_name leads to sql injection. The attack may be performed from remote. The exploit is publicly available and might be used. | medium | 2026-03-23 |
| CVE-2026-33035 | WWBN AVideo is an open source video platform. In versions 25.0 and below, there is a reflected XSS vulnerability that allows unauthenticated attackers to execute arbitrary JavaScript in a victim's browser. User input from a URL parameter flows through PHP's json_encode() into a JavaScript function that renders it via innerHTML, bypassing encoding and achieving full script execution. The vulnerability is caused by two issues working together: unescaped user input passed to JavaScript (videoNotFound.php), and innerHTML rendering HTML tags as executable DOM (script.js). The attack can be escalated to steal session cookies, take over accounts, phish credentials via injected login forms, spread self-propagating payloads, and compromise admin accounts — all by exploiting the lack of proper input sanitization and cookie security (e.g., missing HttpOnly flag on PHPSESSID). The issue has been fixed in version 26.0. | medium | 2026-03-24 |
| CVE-2026-33025 | AVideo is a video-sharing Platform. Versions prior to 8.0 contain a SQL Injection vulnerability in the getSqlFromPost() method of Object.php. The $_POST['sort'] array keys are used directly as SQL column identifiers inside an ORDER BY clause. Although real_escape_string() was applied, it only escapes string-context characters (quotes, null bytes) and provides no protection for SQL identifiers — making it entirely ineffective here. This issue has been fixed in version 8.0. To workaround this issue without upgrading, operators can apply a WAF rule to block POST requests where any sort[*] key contains characters outside [A-Za-z0-9_]. Alternatively, restrict access to the queue view (queue.json.php, index.php) to trusted IP ranges only. | high | 2026-03-24 |
| CVE-2026-33024 | AVideo is a video-sharing Platform. Versions prior to 8.0 contain a Server-Side Request Forgery vulnerability (CWE-918) in the public thumbnail endpoints getImage.php and getImageMP4.php. Both endpoints accept a base64Url GET parameter, base64-decode it, and pass the resulting URL to ffmpeg as an input source without any authentication requirement. The prior validation only checked that the URL was syntactically valid (FILTER_VALIDATE_URL) and started with http(s)://. This is insufficient: an attacker can supply URLs such as http://169.254.169.254/latest/meta-data/ (AWS/cloud instance metadata), http://192.168.x.x/, or http://127.0.0.1/ to make the server reach internal network resources. The response is not directly returned (blind), but timing differences and error logs can be used to infer results. The issue has been fixed in version 8.0. | critical | 2026-03-24 |
| CVE-2026-33017 | Langflow is a tool for building and deploying AI-powered agents and workflows. In versions prior to 1.9.0, the POST /api/v1/build_public_tmp/{flow_id}/flow endpoint allows building public flows without requiring authentication. When the optional data parameter is supplied, the endpoint uses attacker-controlled flow data (containing arbitrary Python code in node definitions) instead of the stored flow data from the database. This code is passed to exec() with zero sandboxing, resulting in unauthenticated remote code execution. This is distinct from CVE-2025-3248, which fixed /api/v1/validate/code by adding authentication. The build_public_tmp endpoint is designed to be unauthenticated (for public flows) but incorrectly accepts attacker-supplied flow data containing arbitrary executable code. This issue has been fixed in version 1.9.0. | critical | 2026-03-26 |
| CVE-2026-33013 | Micronaut Framework is a JVM-based full stack Java framework designed for building modular, easily testable JVM applications. Versions prior to both 4.10.16 and 3.10.5 do not correctly handle descending array index order during form-urlencoded body binding in theJsonBeanPropertyBinder::expandArrayToThreshold, which allows remote attackers to cause a DoS (non-terminating loop, CPU exhaustion, and OutOfMemoryError) via crafted indexed form parameters (e.g., authors[1].name followed by authors[0].name). This issue has been fixed in versions 4.10.16 and 3.10.5. | high | 2026-03-24 |
| CVE-2026-33012 | Micronaut Framework is a JVM-based full stack Java framework designed for building modular, easily testable JVM applications. Versions 4.7.0 through 4.10.16 used an unbounded ConcurrentHashMap cache with no eviction policy in its DefaultHtmlErrorResponseBodyProvider. If the application throws an exception whose message may be influenced by an attacker, (for example, including request query value parameters) it could be used by remote attackers to cause an unbounded heap growth and OutOfMemoryError, leading to DoS. This issue has been fixed in version 4.10.7. | high | 2026-03-24 |
| CVE-2026-33011 | Nest is a framework for building scalable Node.js server-side applications. In versions 11.1.15 and below, a NestJS application using @nestjs/platform-fastify GET middleware can be bypassed because Fastify automatically redirects HEAD requests to the corresponding GET handlers (if they exist). As a result: middleware will be completely skipped, the HTTP response won't include a body (since the response is truncated when redirecting a HEAD request to a GET handler), and the actual handler will still be executed. This issue is fixed in version 11.1.16. | high | 2026-03-23 |
| CVE-2026-32954 | ERP is a free and open source Enterprise Resource Planning tool. In versions prior to 16.8.0 and 15.100.0, certain endpoints were vulnerable to time-based and boolean-based blind SQL injection due to insufficient parameter validation, allowing attackers to infer database information. This issue has been fixed in versions 15.100.0 and 16.8.0. | high | 2026-03-23 |
| CVE-2026-32953 | Tillitis TKey Client package is a Go package for a TKey client. Versions 1.2.0 and below contain a critical bug in the tkeyclient Go module which causes 1 out of every 256 User Supplied Secrets (USS) to be silently ignored, producing the same Compound Device Identifier (CDI)—and thus the same key material—as if no USS is provided. This happens because a buffer index error overwrites the USS-enabled boolean with the first byte of the USS digest, so any USS whose hash starts with 0x00 is effectively discarded. This issue has been fixed in version 1.3.0. Users unable to upgrade immediately should switch to a USS whose hash does not begin with a zero byte. | medium | 2026-03-20 |
| CVE-2026-32950 | SQLBot is an intelligent data query system based on a large language model and RAG. Versions prior to 1.7.0 contain a critical SQL Injection vulnerability in the /api/v1/datasource/uploadExcel endpoint that enables Remote Code Execution (RCE), allowing any authenticated user (even the lowest-privileged) to fully compromise the backend server. The root cause is twofold: Excel Sheet names are concatenated directly into PostgreSQL table names without sanitization (datasource.py#L351), and those table names are embedded into COPY SQL statements via f-strings instead of parameterized queries (datasource.py#L385-L388). An attacker can bypass the 31-character Sheet name limit using a two-stage technique—first uploading a normal file whose data rows contain shell commands, then uploading an XML-tampered file whose Sheet name injects a TO PROGRAM 'sh' clause into the SQL. Confirmed impacts include arbitrary command execution as the postgres user (uid=999), sensitive file exfiltration (e.g., /etc/passwd, /etc/shadow), and complete PostgreSQL database takeover. This issue has been fixed in version 1.7.0. | high | 2026-03-23 |
| CVE-2026-32949 | SQLBot is an intelligent data query system based on a large language model and RAG. Versions prior to 1.7.0 contain a Server-Side Request Forgery (SSRF) vulnerability that allows an attacker to retrieve arbitrary system and application files from the server. An attacker can exploit the /api/v1/datasource/check endpoint by configuring a forged MySQL data source with a malicious parameter extraJdbc="local_infile=1". When the SQLBot backend attempts to verify the connectivity of this data source, an attacker-controlled Rogue MySQL server issues a malicious LOAD DATA LOCAL INFILE command during the MySQL handshake. This forces the target server to read arbitrary files from its local filesystem (such as /etc/passwd or configuration files) and transmit the contents back to the attacker. This issue was fixed in version 1.7.0. | high | 2026-03-23 |
| CVE-2026-32947 | Harden-Runner is a CI/CD security agent that works like an EDR for GitHub Actions runners. In versions 2.15.1 and below, a DNS over HTTPS (DoH) vulnerability allows attackers to bypass egress-policy: block network restrictions by tunneling exfiltrated data through permitted HTTPS endpoints like dns.google. The attack works by encoding sensitive data (e.g., the runner's hostname) as subdomains in DoH queries, which appear as legitimate HTTPS traffic to Harden-Runner's domain-based filtering but are ultimately forwarded to an attacker-controlled domain. This effectively enables data exfiltration without directly connecting to any blocked destination. Exploitation requires the attacker to already have code execution within the GitHub Actions workflow. The issue was fixed in version 2.16.0. | medium | 2026-03-24 |
| CVE-2026-4468 | A vulnerability was determined in Comfast CF-AC100 2.6.0.8. Affected is an unknown function of the file /cgi-bin/mbox-config?method=SET§ion=update_interface_png. This manipulation causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | medium | 2026-03-20 |
