| 1.34 CISC-RT-000391 | CIS Cisco IOS XE Router RTR STIG v1.1.0 CAT II | Cisco | CONFIGURATION MANAGEMENT |
| 1.76 CISC-RT-000750 | CIS Cisco IOS XR Router RTR STIG v1.0.0 CAT II | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-ND-000130 - The Arista network device must display the Standard Mandatory DOD Notice and Consent Banner before granting access to the device. | DISA Arista MLS EOS 4.X NDM STIG v2r2 | Arista | ACCESS CONTROL |
| CISC-RT-000010 - The Cisco router must be configured to enforce approved authorizations for controlling the flow of information within the network based on organization-defined information flow control policies. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000050 - The Cisco router must be configured to enable routing protocol authentication using FIPS 198-1 algorithms with keys not exceeding 180 days of lifetime. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL, IDENTIFICATION AND AUTHENTICATION |
| CISC-RT-000150 - The Cisco router must be configured to have Gratuitous ARP disabled on all external interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000160 - The Cisco router must be configured to have IP directed broadcast disabled on all interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000190 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) redirect messages disabled on all external interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000220 - The Cisco router must be configured to produce audit records containing information to establish the source of the events. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000235 - The Cisco router must be configured to have Cisco Express Forwarding enabled. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000237 - The Cisco router must not be configured to use IPv6 Site Local Unicast addresses. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000240 - The Cisco perimeter router must be configured to deny network traffic by default and allow network traffic by exception. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000250 - The Cisco perimeter router must be configured to enforce approved authorizations for controlling the flow of information between interconnected networks in accordance with applicable policy. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000290 - The Cisco perimeter router must be configured to not be a Border Gateway Protocol (BGP) peer to an approved gateway service provider. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000310 - The Cisco perimeter router must be configured to restrict it from accepting outbound IP packets that contain an illegitimate address in the source address field via egress filter or by enabling Unicast Reverse Path Forwarding (uRPF). | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000320 - The Cisco perimeter router must be configured to filter traffic destined to the enclave in accordance with the guidelines contained in DoD Instruction 8551.1. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000330 - The Cisco perimeter router must be configured to filter ingress traffic at the external interface on an inbound direction. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000340 - The Cisco perimeter router must be configured to filter egress traffic at the internal interface on an inbound direction. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000350 - The Cisco perimeter router must be configured to block all packets with any IP options. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000360 - The Cisco perimeter router must be configured to have Link Layer Discovery Protocol (LLDP) disabled on all external interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000370 - The Cisco perimeter router must be configured to have Cisco Discovery Protocol (CDP) disabled on all external interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000380 - The Cisco perimeter router must be configured to have Proxy ARP disabled on all external interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000390 - The Cisco perimeter router must be configured to block all outbound management traffic. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000391 - The Cisco perimeter router must be configured to suppress Router Advertisements on all external IPv6-enabled interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000393 - The Cisco perimeter router must be configured drop IPv6 packets with a Routing Header type 0, 1, or 3-255. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000395 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000398 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000430 - The Cisco out-of-band management (OOBM) gateway router must be configured to not redistribute routes between the management network routing domain and the managed network routing domain. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000450 - The Cisco router must be configured to only permit management traffic that ingresses and egresses the out-of-band management (OOBM) interface. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000470 - The Cisco BGP router must be configured to enable the Generalized TTL Security Mechanism (GTSM). | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000490 - The Cisco BGP router must be configured to reject inbound route advertisements for any Bogon prefixes. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000530 - The Cisco BGP router must be configured to reject outbound route advertisements for any prefixes belonging to the IP core. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000540 - The Cisco BGP router must be configured to reject route advertisements from BGP peers that do not list their autonomous system (AS) number as the first AS in the AS_PATH attribute. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000570 - The Cisco BGP router must be configured to limit the prefix size on any inbound route advertisement to /24 or the least significant prefixes issued to the customer. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000610 - The MPLS router with RSVP-TE enabled must be configured with message pacing to adjust maximum burst and maximum number of RSVP messages to an output queue based on the link speed and input queue size of adjacent core routers. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000640 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT). | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000670 - The Cisco PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000760 - The Cisco PE router must be configured to enforce a Quality-of-Service (QoS) policy to provide preferred treatment for mission-critical applications. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000770 - The Cisco P router must be configured to enforce a Quality-of-Service (QoS) policy to provide preferred treatment for mission-critical applications. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000790 - The Cisco multicast router must be configured to disable Protocol Independent Multicast (PIM) on all interfaces that are not required to support multicast routing. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000800 - The Cisco multicast router must be configured to bind a Protocol Independent Multicast (PIM) neighbor filter to interfaces that have PIM enabled. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000850 - The Cisco multicast Rendezvous Point (RP) must be configured to rate limit the number of Protocol Independent Multicast (PIM) Register messages. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000860 - The Cisco multicast Designated Router (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join only multicast groups that have been approved by the organization. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000870 - The Cisco multicast Designated Router (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join a multicast group only from sources that have been approved by the organization. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000890 - The Cisco multicast Designated Router (DR) must be configured to set the shortest-path tree (SPT) threshold to infinity to minimalize source-group (S, G) state within the multicast topology where Any Source Multicast (ASM) is deployed. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000900 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to only accept MSDP packets from known MSDP peers. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000910 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to authenticate all received MSDP packets. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| CISC-RT-000920 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to filter received source-active multicast advertisements for any undesirable multicast groups and sources. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000940 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to limit the amount of source-active messages it accepts on a per-peer basis. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
