| 1.33 CISC-RT-000391 | CIS Cisco IOS XR Router RTR STIG v1.0.0 CAT II | Cisco | CONFIGURATION MANAGEMENT |
| 1.50 CISC-RT-000490 | CIS Cisco IOS XR Router RTR STIG v1.0.0 CAT II | Cisco | ACCESS CONTROL |
| 1.51 CISC-RT-000500 | CIS Cisco IOS XR Router RTR STIG v1.0.0 CAT II | Cisco | ACCESS CONTROL |
| 1.54 CISC-RT-000530 | CIS Cisco IOS XR Router RTR STIG v1.0.0 CAT II | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| 1.77 CISC-RT-000750 | CIS Cisco IOS XE Router RTR STIG v1.1.0 CAT II | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| 1.91 CISC-RT-000900 | CIS Cisco IOS XR Router RTR STIG v1.0.0 CAT II | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| 1.92 CISC-RT-000900 | CIS Cisco IOS XE Router RTR STIG v1.1.0 CAT II | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| 1.92 CISC-RT-000910 | CIS Cisco IOS XR Router RTR STIG v1.0.0 CAT II | Cisco | IDENTIFICATION AND AUTHENTICATION |
| 2.1.1.1.3 Set 'modulus' to greater than or equal to 2048 for 'crypto key generate rsa' | CIS Cisco IOS XE 16.x v2.2.0 L1 | Cisco | SYSTEM AND SERVICES ACQUISITION |
| 2.1.1.1.3 Set 'modulus' to greater than or equal to 2048 for 'crypto key generate rsa' | CIS Cisco IOS XE 17.x v2.2.1 L1 | Cisco | SYSTEM AND SERVICES ACQUISITION |
| ARST-RT-000640 - The Arista perimeter router must be configured to have Proxy ARP disabled on all external interfaces. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000640 - The Arista perimeter router must be configured to have Proxy ARP disabled on all external interfaces. | DISA Arista MLS EOS 4.X Router STIG v2r2 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000060 - The Cisco router must be configured to have all inactive interfaces disabled. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000090 - The Cisco router must not be configured to have any zero-touch deployment feature enabled when connected to an operational network. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000120 - The Cisco router must be configured to protect against or limit the effects of denial-of-service (DoS) attacks by employing control plane protection. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000170 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) unreachable messages disabled on all external interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000180 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) mask reply messages disabled on all external interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000200 - The Cisco router must be configured to log all packets that have been dropped at interfaces via an ACL. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000210 - The Cisco router must be configured to produce audit records containing information to establish where the events occurred. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000220 - The Cisco router must be configured to produce audit records containing information to establish the source of the events. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000230 - The Cisco router must be configured to disable the auxiliary port unless it is connected to a secured modem providing encryption and authentication. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000236 - The Cisco router must be configured to advertise a hop limit of at least 32 in Router Advertisement messages for IPv6 stateless auto-configuration deployments. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000260 - The Cisco perimeter router must be configured to only allow incoming communications from authorized sources to be routed to authorized destinations. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000270 - The Cisco perimeter router must be configured to block inbound packets with source Bogon IP address prefixes. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000280 - The Cisco perimeter router must be configured to protect an enclave connected to an approved gateway by using an inbound filter that only permits packets with destination addresses within the sites address space. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000300 - The Cisco perimeter router must be configured to not redistribute static routes to an approved gateway service provider into BGP, an IGP peering with the NIPRNet, or other autonomous systems. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000394 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop header with invalid option type values. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000397 - The Cisco perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000400 - The Cisco out-of-band management (OOBM) gateway router must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit, MPLS/VPN service, or IPsec tunnel. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000410 - The Cisco out-of-band management (OOBM) gateway router must be configured to forward only authorized management traffic to the Network Operations Center (NOC). | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000420 - The Cisco out-of-band management (OOBM) gateway router must be configured to have separate IGP instances for the managed network and management network. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000440 - The Cisco out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the Network Operations Center (NOC). | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000460 - The Cisco router providing connectivity to the Network Operations Center (NOC) must be configured to forward all in-band management traffic via an IPsec tunnel. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000480 - The Cisco BGP router must be configured to use a unique key for each autonomous system (AS) that it peers with. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000510 - The Cisco BGP router must be configured to reject inbound route advertisements from a customer edge (CE) router for prefixes that are not allocated to that customer. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000520 - The Cisco BGP router must be configured to reject outbound route advertisements for any prefixes that do not belong to any customers or the local autonomous system (AS). | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000550 - The Cisco BGP router must be configured to reject route advertisements from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000580 - The Cisco BGP router must be configured to use its loopback address as the source address for iBGP peering sessions. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000590 - The Cisco MPLS router must be configured to use its loopback address as the source address for LDP peering sessions. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000600 - The Cisco MPLS router must be configured to synchronize IGP and LDP to minimize packet loss when an IGP adjacency is established prior to LDP peers completing label exchange. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000620 - The Cisco MPLS router must be configured to have TTL Propagation disabled. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000650 - The Cisco PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD). | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000740 - The Cisco PE router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode enabled on all CE-facing interfaces. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000750 - The Cisco PE router must be configured to drop all packets with any IP options. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000810 - The Cisco multicast edge router must be configured to establish boundaries for administratively scoped multicast traffic. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000820 - The Cisco multicast Rendezvous Point (RP) router must be configured to limit the multicast forwarding cache so that its resources are not saturated by managing an overwhelming number of Protocol Independent Multicast (PIM) and Multicast Source Discovery Protocol (MSDP) source-active entries. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000830 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Register messages received from the Designated Router (DR) for any undesirable multicast groups and sources. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000840 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
| CISC-RT-000880 - The Cisco multicast Designated Router (DR) must be configured to limit the number of mroute states resulting from Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Host Membership Reports. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000930 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to filter source-active multicast advertisements to external MSDP peers to avoid global visibility of local-only multicast sources and groups. | DISA Cisco IOS Router RTR STIG v3r4 | Cisco | ACCESS CONTROL |
