| 3.1.2 Ensure access profile is set to use CHAP | CIS Juniper OS Benchmark v2.1.0 L1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| 3.2.1 Set 'ip access-list extended' to Forbid Private Source Addresses from External Networks - 'Default deny configured' | CIS Cisco IOS 12 L2 v4.0.0 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| 3.2.1 Set 'ip access-list extended' to Forbid Private Source Addresses from External Networks - 'Deny host 255.255.255.255' | CIS Cisco IOS 12 L2 v4.0.0 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| 3.2.2 Set inbound 'ip access-group' on the External Interface | CIS Cisco IOS 12 L2 v4.0.0 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| 3.3.2.3 Ensure net.ipv6.conf.all.accept_redirects is configured | CIS Debian Linux 12 v2.0.0 L1 Workstation | Unix | CONFIGURATION MANAGEMENT |
| 3.3.2.4 Ensure net.ipv6.conf.default.accept_redirects is configured | CIS Debian Linux 12 v2.0.0 L1 Workstation | Unix | CONFIGURATION MANAGEMENT |
| ARST-RT-000010 - The Arista router must be configured to enforce approved authorizations for controlling the flow of information within the network based on organization-defined information flow control policies. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | ACCESS CONTROL |
| ARST-RT-000020 - The Arista BGP router must be configured to reject inbound route advertisements for any Bogon prefixes. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | ACCESS CONTROL |
| ARST-RT-000200 - The out-of-band management (OOBM) Arista gateway router must be configured to not redistribute routes between the management network routing domain and the managed network routing domain. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | ACCESS CONTROL |
| ARST-RT-000290 - The MPLS router with RSVP-TE enabled must be configured with message pacing or refresh reduction to adjust maximum number of RSVP messages to an output queue based on the link speed and input queue size of adjacent core routers. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000520 - The Arista router must be configured to have IP directed broadcast disabled on all interfaces. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000560 - The Arista BGP router must be configured to use the maximum prefixes feature to protect against route table flooding and prefix de-aggregation attacks. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000760 - The PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit. | DISA STIG Arista MLS EOS 4.2x Router v2r1 | Arista | CONTINGENCY PLANNING |
| CASA-FW-000290 - The Cisco ASA must be configured to restrict it from accepting outbound packets that contain an illegitimate address in the source address field via an egress filter or by enabling Unicast Reverse Path Forwarding (uRPF) - network-object | DISA STIG Cisco ASA FW v2r1 | Cisco | CONFIGURATION MANAGEMENT |
| CASA-FW-000300 - The Cisco ASA must be configured to generate an alert that can be forwarded to organization-defined personnel and/or the firewall administrator when denial-of-service (DoS) incidents are detected - basic-threat | DISA STIG Cisco ASA FW v2r1 | Cisco | SYSTEM AND INFORMATION INTEGRITY |
| CASA-ND-000010 - The Cisco ASA must be configured to limit the number of concurrent management sessions to an organization-defined number. | DISA STIG Cisco ASA NDM v2r5 | Cisco | ACCESS CONTROL |
| CASA-ND-000100 - The Cisco ASA must be configured to automatically audit account modification. | DISA STIG Cisco ASA NDM v2r5 | Cisco | ACCESS CONTROL |
| CASA-ND-000270 - The Cisco ASA must be configured to produce audit records containing information to establish when (date and time) the events occurred. | DISA STIG Cisco ASA NDM v2r5 | Cisco | AUDIT AND ACCOUNTABILITY |
| CASA-ND-000450 - The Cisco ASA must be configured with only one local account to be used as the account of last resort in the event the authentication server is unavailable. | DISA STIG Cisco ASA NDM v2r5 | Cisco | ACCESS CONTROL |
| CASA-ND-000970 - The Cisco ASA must be configured to record time stamps for audit records that meet a granularity of one second for a minimum degree of precision. | DISA STIG Cisco ASA NDM v2r5 | Cisco | AUDIT AND ACCOUNTABILITY |
| CASA-ND-001150 - The Cisco ASA must be configured to implement cryptographic mechanisms using a FIPS 140-2 approved algorithm to protect the confidentiality of remote maintenance sessions. | DISA STIG Cisco ASA NDM v2r5 | Cisco | MAINTENANCE |
| CASA-ND-001240 - The Cisco ASA must be configured to generate audit records showing starting and ending time for administrator access to the system. | DISA STIG Cisco ASA NDM v2r5 | Cisco | AUDIT AND ACCOUNTABILITY |
| CASA-ND-001410 - The Cisco ASA must be configured to send log data to at least two central log servers for the purpose of forwarding alerts to organization-defined personnel and/or the firewall administrator. | DISA STIG Cisco ASA NDM v2r5 | Cisco | AUDIT AND ACCOUNTABILITY |
| CASA-VN-000010 - The Cisco ASA must be configured to generate log records containing information to establish what type of VPN events occurred. | DISA STIG Cisco ASA VPN v2r2 | Cisco | AUDIT AND ACCOUNTABILITY |
| CASA-VN-000120 - The Cisco ASA must be configured to validate certificates via a trustpoint that identifies a DoD or DoD-approved certificate authority. | DISA STIG Cisco ASA VPN v2r2 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| CASA-VN-000150 - The Cisco ASA must be configured to use Internet Key Exchange (IKE) for all IPsec security associations. | DISA STIG Cisco ASA VPN v2r2 | Cisco | CONFIGURATION MANAGEMENT |
| CASA-VN-000160 - The Cisco ASA must be configured to use Internet Key Exchange v2 (IKEv2) for all IPsec security associations. | DISA STIG Cisco ASA VPN v2r2 | Cisco | CONFIGURATION MANAGEMENT |
| CASA-VN-000340 - The Cisco ASA VPN gateway must use cryptographic algorithms approved by NSA to protect NSS when transporting classified traffic across an unclassified network. | DISA STIG Cisco ASA VPN v2r2 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CASA-VN-000360 - The Cisco ASA VPN gateway must be configured to renegotiate the IKE security association after 24 hours or less. | DISA STIG Cisco ASA VPN v2r2 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| CASA-VN-000460 - The Cisco ASA remote access VPN server must be configured to display the Standard Mandatory DoD Notice and Consent Banner before granting access to the network. | DISA STIG Cisco ASA VPN v2r2 | Cisco | ACCESS CONTROL |
| CASA-VN-000560 - The Cisco ASA remote access VPN server must be configured to use a FIPS-validated algorithm and hash function to protect the integrity of TLS remote access sessions. | DISA STIG Cisco ASA VPN v2r2 | Cisco | ACCESS CONTROL |
| CASA-VN-000720 - The Cisco ASA VPN remote access server must be configured to generate log records when successful and/or unsuccessful VPN connection attempts occur. | DISA STIG Cisco ASA VPN v2r2 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000040 - The Cisco switch must be configured to use encryption for routing protocol authentication. | DISA Cisco NX OS Switch RTR STIG v3r4 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| IIST-SV-000142 - The IIS 10.0 web server must restrict inbound connections from non-secure zones. | DISA Microsoft IIS 10.0 Server STIG v3r7 | Windows | ACCESS CONTROL |
| IIST-SV-000142 - The IIS 10.0 web server must restrict inbound connections from non-secure zones. | DISA IIS 10.0 Server v2r10 | Windows | ACCESS CONTROL |
| JUEX-RT-000030 - The Juniper BGP router must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS). | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | ACCESS CONTROL |
| JUEX-RT-000040 - The Juniper BGP router must be configured to reject inbound route advertisements from a customer edge (CE) router for prefixes that are not allocated to that customer. | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | ACCESS CONTROL |
| JUEX-RT-000160 - The Juniper router must be configured to have all inactive interfaces disabled. | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | ACCESS CONTROL |
| JUEX-RT-000190 - The Juniper perimeter router must not be configured to redistribute static routes to an alternate gateway service provider into BGP or an IGP peering with the NIPRNet or to other autonomous systems. | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | ACCESS CONTROL |
| JUEX-RT-000230 - The Juniper multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups. | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | ACCESS CONTROL |
| JUEX-RT-000380 - The Juniper router must be configured to restrict traffic destined to itself. | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000440 - The Juniper PE router must be configured to block any traffic that is destined to IP core infrastructure. | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000470 - The Juniper out-of-band management (OOBM) gateway router must be configured to forward only authorized management traffic to the Network Operations Center (NOC). | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000690 - The Juniper multicast Rendezvous Point (RP) must be configured to rate limit the number of Protocol Independent Multicast (PIM) Register messages. | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000710 - The Juniper multicast Designated Router (DR) must be configured to increase the shortest-path tree (SPT) threshold or set it to infinity to minimalize source-group (S, G) state within the multicast topology where Any Source Multicast (ASM) is deployed. | DISA Juniper EX Series Switches Router STIG v2r1 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| SPLK-CL-000235 - Splunk Enterprise must notify analysts of applicable events for Tier 2 CSSP and JRSS only. | DISA STIG Splunk Enterprise 7.x for Windows v3r2 REST API | Splunk | ACCESS CONTROL |
| TCAT-AS-000970 - Idle timeout for the management application must be set to 10 minutes. | DISA STIG Apache Tomcat Application Server 9 v3r4 Middleware | Unix | ACCESS CONTROL, IDENTIFICATION AND AUTHENTICATION |
| TCAT-AS-001680 - ALLOW_BACKSLASH must be set to false. | DISA STIG Apache Tomcat Application Server 9 v3r4 Middleware | Unix | CONFIGURATION MANAGEMENT |
| WG040 A22 - Public web server resources must not be shared with private assets. | DISA STIG Apache Server 2.2 Unix v1r11 Middleware | Unix | |
| WG040 A22 - Public web server resources must not be shared with private assets. | DISA STIG Apache Server 2.2 Unix v1r11 | Unix | |