Item Search

NameAudit NamePluginCategory
1.9 SSL Strong Algorithm - b) ciphersuiteTenable ZTE ROSNG Best PracticesZTE_ROSNG
1.189 RHEL-09-253045CIS Red Hat Enterprise Linux 9 STIG v1.0.0 CAT IIUnix

CONFIGURATION MANAGEMENT

AOSX-15-001060 - The macOS system must accept and verify Personal Identity Verification (PIV) credentials, implement a local cache of revocation data to support path discovery and validation in case of the inability to access revocation information via the network, and only allow the use of DoD PKI-established certificate authorities for verification of the establishment of protected sessions.DISA STIG Apple Mac OSX 10.15 v1r10Unix

IDENTIFICATION AND AUTHENTICATION, SYSTEM AND COMMUNICATIONS PROTECTION

ARST-RT-000050 - The Arista BGP router must be configured to reject outbound route advertisements for any prefixes that do not belong to any customers or the local autonomous system (AS).DISA STIG Arista MLS EOS 4.2x Router v2r1Arista

ACCESS CONTROL

ARST-RT-000320 - The PE router must be configured to enforce a Quality-of-Service (QoS) policy in accordance with the QoS GIG Technical Profile.DISA Arista MLS EOS 4.X Router STIG v2r2Arista

SYSTEM AND COMMUNICATIONS PROTECTION

ARST-RT-000350 - The Arista router must be configured to drop all fragmented Internet Control Message Protocol (ICMP) packets destined to itself.DISA STIG Arista MLS EOS 4.2x Router v2r1Arista

SYSTEM AND COMMUNICATIONS PROTECTION

ARST-RT-000420 - The out-of-band management (OOBM) Arista gateway router must be configured to forward only authorized management traffic to the Network Operations Center (NOC).DISA STIG Arista MLS EOS 4.2x Router v2r1Arista

SYSTEM AND COMMUNICATIONS PROTECTION

ARST-RT-000610 - The Arista perimeter router must be configured to only allow incoming communications from authorized sources to be routed to authorized destinations.DISA STIG Arista MLS EOS 4.2x Router v2r1Arista

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-ND-000010 - The Cisco router must be configured to limit the number of concurrent management sessions to an organization-defined number.DISA Cisco IOS XE Router NDM STIG v3r7Cisco

ACCESS CONTROL

CISC-ND-000090 - The Cisco router must be configured to automatically audit account creation.DISA Cisco IOS XE Router NDM STIG v3r7Cisco

ACCESS CONTROL

CISC-ND-000140 - The Cisco router must be configured to enforce approved authorizations for controlling the flow of management information within the device based on control policies.DISA Cisco IOS XR Router NDM STIG v3r6Cisco

ACCESS CONTROL

CISC-ND-000290 - The Cisco router must produce audit records containing information to establish where the events occurred.DISA Cisco IOS XR Router NDM STIG v3r6Cisco

AUDIT AND ACCOUNTABILITY

CISC-ND-000470 - The Cisco router must be configured to prohibit the use of all unnecessary and nonsecure functions and services.DISA Cisco IOS XE Router NDM STIG v3r7Cisco

CONFIGURATION MANAGEMENT

CISC-ND-000880 - The Cisco router must be configured to automatically audit account enabling actions.DISA Cisco IOS XE Router NDM STIG v3r7Cisco

ACCESS CONTROL

CISC-ND-001130 - The Cisco router must be configured to authenticate SNMP messages using a FIPS-validated Keyed-Hash Message Authentication Code (HMAC).DISA Cisco IOS XR Router NDM STIG v3r6Cisco

IDENTIFICATION AND AUTHENTICATION

CISC-ND-001140 - The Cisco router must be configured to encrypt SNMP messages using a FIPS 140-2 approved algorithm.DISA Cisco IOS XE Router NDM STIG v3r7Cisco

ACCESS CONTROL

CISC-ND-001270 - The Cisco router must be configured to generate log records for privileged activities.DISA Cisco IOS XE Router NDM STIG v3r7Cisco

AUDIT AND ACCOUNTABILITY

CISC-ND-001370 - The Cisco router must be configured to use at least two authentication servers for the purpose of authenticating users prior to granting administrative access.DISA Cisco IOS XE Router NDM STIG v3r7Cisco

CONFIGURATION MANAGEMENT

CISC-ND-001410 - The Cisco router must be configured to back up the configuration when changes occur.DISA Cisco IOS XE Router NDM STIG v3r7Cisco

CONFIGURATION MANAGEMENT, CONTINGENCY PLANNING

CISC-ND-001450 - The Cisco router must be configured to send log data to at least two syslog servers for the purpose of forwarding alerts to the administrators and the information system security officer (ISSO).DISA Cisco IOS XR Router NDM STIG v3r6Cisco

AUDIT AND ACCOUNTABILITY

CISC-RT-000010 - The Cisco router must be configured to enforce approved authorizations for controlling the flow of information within the network based on organization-defined information flow control policies.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000060 - The Cisco router must be configured to have all inactive interfaces disabled.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000170 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) unreachable messages disabled on all external interfaces.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000180 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) mask reply messages disabled on all external interfaces.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000190 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) redirect messages disabled on all external interfaces.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000240 - The Cisco perimeter router must be configured to deny network traffic by default and allow network traffic by exception.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000250 - The Cisco perimeter router must be configured to enforce approved authorizations for controlling the flow of information between interconnected networks in accordance with applicable policy.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000290 - The Cisco perimeter router must be configured to not be a Border Gateway Protocol (BGP) peer to an alternate gateway service provider.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000300 - The Cisco perimeter router must be configured to not redistribute static routes to an alternate gateway service provider into BGP or an Interior Gateway Protocol (IGP) peering with the NIPRNet or to other autonomous systems.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000390 - The Cisco perimeter router must be configured to block all outbound management traffic.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000395 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000396 - The Cisco perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000460 - The Cisco router providing connectivity to the Network Operations Center (NOC) must be configured to forward all in-band management traffic via an IPsec tunnel.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000520 - The Cisco BGP router must be configured to reject outbound route advertisements for any prefixes that do not belong to any customers or the local autonomous system (AS).DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000560 - The Cisco BGP router must be configured to use the maximum prefixes feature to protect against route table flooding and prefix de-aggregation attacks.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000680 - The Cisco PE router providing Virtual Private LAN Services (VPLS) must be configured to have all attachment circuits defined to the virtual forwarding instance (VFI) with the globally unique VPN ID assigned for each customer VLAN.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

CONFIGURATION MANAGEMENT

CISC-RT-000690 - The Cisco PE router must be configured to enforce the split-horizon rule for all pseudowires within a Virtual Private LAN Services (VPLS) bridge domain.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

CONFIGURATION MANAGEMENT

CISC-RT-000710 - The Cisco PE router must be configured to implement Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) snooping for each Virtual Private LAN Services (VPLS) bridge domain.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000780 - The Cisco PE router must be configured to enforce a Quality-of-Service (QoS) policy to limit the effects of packet flooding denial-of-service (DoS) attacks.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000790 - The Cisco multicast router must be configured to disable Protocol Independent Multicast (PIM) on all interfaces that are not required to support multicast routing.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000800 - The Cisco multicast router must be configured to bind a Protocol Independent Multicast (PIM) neighbor filter to interfaces that have PIM enabled.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000810 - The Cisco multicast edge router must be configured to establish boundaries for administratively scoped multicast traffic.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000830 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Register messages received from the Designated Router (DR) for any undesirable multicast groups and sources.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000840 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000870 - The Cisco multicast Designated Router (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join a multicast group only from sources that have been approved by the organization.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000890 - The Cisco multicast Designated Router (DR) must be configured to set the shortest-path tree (SPT) threshold to infinity to minimalize source-group (S, G) state within the multicast topology where Any Source Multicast (ASM) is deployed.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000920 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to filter received source-active multicast advertisements for any undesirable multicast groups and sources.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

O19C-00-015200 - Oracle Database, when using public key infrastructure (PKI)-based authentication, must enforce authorized access to the corresponding private key.DISA Oracle Database 19c STIG v1r5 UnixUnix

IDENTIFICATION AND AUTHENTICATION

PANW-IP-000047 - The Palo Alto Networks security platform must generate a log record when unauthorized network services are detected.DISA Palo Alto Networks IDPS STIG v3r2Palo_Alto

SYSTEM AND INFORMATION INTEGRITY