Item Search

NameAudit NamePluginCategory
1.36 CISC-ND-001260CIS Cisco IOS XE Switch NDM STIG v1.1.0 CAT IICisco

AUDIT AND ACCOUNTABILITY

1.38 CISC-ND-001370CIS Cisco NX OS Switch NDM STIG v1.1.0 CAT ICisco

CONFIGURATION MANAGEMENT

1.39 CISC-ND-001370CIS Cisco IOS Switch NDM STIG v1.1.0 CAT ICisco

CONFIGURATION MANAGEMENT

CISC-RT-000010 - The Cisco router must be configured to enforce approved authorizations for controlling the flow of information within the network based on organization-defined information flow control policies.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000060 - The Cisco router must be configured to have all inactive interfaces disabled.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000170 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) unreachable messages disabled on all external interfaces.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000180 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) mask reply messages disabled on all external interfaces.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000190 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) redirect messages disabled on all external interfaces.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000240 - The Cisco perimeter router must be configured to deny network traffic by default and allow network traffic by exception.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000250 - The Cisco perimeter router must be configured to enforce approved authorizations for controlling the flow of information between interconnected networks in accordance with applicable policy.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000290 - The Cisco perimeter router must be configured to not be a Border Gateway Protocol (BGP) peer to an alternate gateway service provider.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000300 - The Cisco perimeter router must be configured to not redistribute static routes to an alternate gateway service provider into BGP or an Interior Gateway Protocol (IGP) peering with the NIPRNet or to other autonomous systems.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000350 - The Cisco perimeter router must be configured to block all packets with any IP options.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000360 - The Cisco perimeter router must be configured to have Link Layer Discovery Protocol (LLDP) disabled on all external interfaces.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000390 - The Cisco perimeter router must be configured to block all outbound management traffic.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000391 - The Cisco perimeter router must be configured to suppress Router Advertisements on all external IPv6-enabled interfaces.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

CONFIGURATION MANAGEMENT

CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000395 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Destination Option header with invalid option type values.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000396 - The Cisco perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000420 - The Cisco out-of-band management (OOBM) gateway router must be configured to have separate Interior Gateway Protocol (IGP) instances for the managed network and management network.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000430 - The Cisco out-of-band management (OOBM) gateway router must be configured to not redistribute routes between the management network routing domain and the managed network routing domain.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000450 - The Cisco router must be configured to only permit management traffic that ingresses and egresses the out-of-band management (OOBM) interface.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000460 - The Cisco router providing connectivity to the Network Operations Center (NOC) must be configured to forward all in-band management traffic via an IPsec tunnel.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000470 - The Cisco BGP router must be configured to enable the Generalized TTL Security Mechanism (GTSM).DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000510 - The Cisco BGP router must be configured to reject inbound route advertisements from a customer edge (CE) router for prefixes that are not allocated to that customer.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000520 - The Cisco BGP router must be configured to reject outbound route advertisements for any prefixes that do not belong to any customers or the local autonomous system (AS).DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000550 - The Cisco BGP router must be configured to reject route advertisements from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000560 - The Cisco BGP router must be configured to use the maximum prefixes feature to protect against route table flooding and prefix de-aggregation attacks.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000600 - The Cisco MPLS router must be configured to synchronize IGP and LDP to minimize packet loss when an IGP adjacency is established prior to LDP peers completing label exchange.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

CONFIGURATION MANAGEMENT

CISC-RT-000640 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT).DISA Cisco IOS XR Router RTR STIG v3r3Cisco

CONTINGENCY PLANNING

CISC-RT-000660 - The Cisco PE router providing MPLS Layer 2 Virtual Private Network (L2VPN) services must be configured to authenticate targeted Label Distribution Protocol (LDP) sessions used to exchange virtual circuit (VC) information using a FIPS-approved message authentication code algorithm.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

IDENTIFICATION AND AUTHENTICATION

CISC-RT-000670 - The Cisco PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate pseudowire ID for each attachment circuit.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

CONTINGENCY PLANNING

CISC-RT-000680 - The Cisco PE router providing Virtual Private LAN Services (VPLS) must be configured to have all attachment circuits defined to the virtual forwarding instance (VFI) with the globally unique VPN ID assigned for each customer VLAN.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

CONFIGURATION MANAGEMENT

CISC-RT-000690 - The Cisco PE router must be configured to enforce the split-horizon rule for all pseudowires within a Virtual Private LAN Services (VPLS) bridge domain.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

CONFIGURATION MANAGEMENT

CISC-RT-000710 - The Cisco PE router must be configured to implement Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) snooping for each Virtual Private LAN Services (VPLS) bridge domain.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000720 - The Cisco PE router must be configured to limit the number of MAC addresses it can learn for each Virtual Private LAN Services (VPLS) bridge domain.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000780 - The Cisco PE router must be configured to enforce a Quality-of-Service (QoS) policy to limit the effects of packet flooding denial-of-service (DoS) attacks.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000790 - The Cisco multicast router must be configured to disable Protocol Independent Multicast (PIM) on all interfaces that are not required to support multicast routing.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000800 - The Cisco multicast router must be configured to bind a Protocol Independent Multicast (PIM) neighbor filter to interfaces that have PIM enabled.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

ACCESS CONTROL

CISC-RT-000810 - The Cisco multicast edge router must be configured to establish boundaries for administratively scoped multicast traffic.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000820 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000830 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Register messages received from the Designated Router (DR) for any undesirable multicast groups and sources.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000840 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000870 - The Cisco multicast Designated Router (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join a multicast group only from sources that have been approved by the organization.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000890 - The Cisco multicast Designated Router (DR) must be configured to set the shortest-path tree (SPT) threshold to infinity to minimalize source-group (S, G) state within the multicast topology where Any Source Multicast (ASM) is deployed.DISA Cisco IOS XE Router RTR STIG v3r5Cisco

SYSTEM AND COMMUNICATIONS PROTECTION

CISC-RT-000910 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to authenticate all received MSDP packets.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

IDENTIFICATION AND AUTHENTICATION

CISC-RT-000920 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to filter received source-active multicast advertisements for any undesirable multicast groups and sources.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000940 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to limit the amount of source-active messages it accepts on a per-peer basis.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

ACCESS CONTROL

CISC-RT-000950 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to use a loopback address as the source address when originating MSDP traffic.DISA Cisco IOS XR Router RTR STIG v3r3Cisco

CONTINGENCY PLANNING

DISA_STIG_Mozilla_Firefox_v6r8_Windows.audit from DISA Mozilla Firefox STIG v6r8DISA Mozilla Firefox STIG v6r8 WindowsWindows