Detections
Analytics

SOL-11.1-100020 - The limitpriv zone option must be set to the vendor default or less permissive.

Information

Solaris zones can be assigned privileges generally reserved for the global zone using the "limitpriv" zone option. Any privilege assignments in excess of the vendor defaults may provide the ability for a non-global zone to compromise the global zone.

Solution

This check applies to the global zone only. Determine the zone that you are currently securing.

# zonename

If the command output is "global", this check applies.

The Zone Security profile is required:

Change the "limitpriv" setting to default.

# pfexec zonecfg -z [zone] set limitpriv=default

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_SOL_11_x86_V3R6_STIG.zip

Item Details

Category: CONFIGURATION MANAGEMENT

References: 800-53|CM-6b., CAT|III, CCI|CCI-000366, Rule-ID|SV-216239r959010_rule, STIG-ID|SOL-11.1-100020, STIG-Legacy|SV-60767, STIG-Legacy|V-47895, Vuln-ID|V-216239

Plugin: Unix

Control ID: e5849db97c55860d366cdbad0208da3eeba91d17e0c73333aba345c6bebe2cb8