Detections
Analytics

RHEL-10-800130 - RHEL 10 must use reverse path filtering on all Internet Protocol version 4 (IPv4) interfaces.

Information

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface on which they were received. It must not be used on systems that are routers for complicated networks but is helpful for end hosts and routers serving small networks.

Satisfies: SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00076

Solution

Configure RHEL 10 to use reverse path filtering on all IPv4 interfaces.

Create a configuration file if it does not already exist:

$ sudo vi /etc/sysctl.d/99-ipv4_rp_filter.conf

Add the following line to the file:

net.ipv4.conf.all.rp_filter = 1

Reload settings from all system configuration files with the following command:

$ sudo sysctl --system

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_RHEL_10_V1R1_STIG.zip

Item Details

Category: SYSTEM AND COMMUNICATIONS PROTECTION

References: 800-53|SC-5, 800-53|SC-7(2), CAT|II, CCI|CCI-001100, CCI|CCI-002385, Rule-ID|SV-281345r1167185_rule, STIG-ID|RHEL-10-800130, Vuln-ID|V-281345

Plugin: Unix

Control ID: c49f5ac115392a9505d1e02cf4f8a2f874f058b3bf8a2ea29dd145e3be686873