Detections
Analytics

OS10-RTR-000480 - The Dell OS10 out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the NOC.

Information

If the gateway router is not a dedicated device for the OOBM network, several safeguards must be implemented for containment of management and production traffic boundaries. It is imperative that hosts from the managed network are not able to access the OOBM gateway router.

NOTE: Nessus has provided the target output to assist in reviewing the benchmark to ensure target compliance.

Solution

This requirement is not applicable for the DODIN Backbone. If the OOBM gateway router is a dedicated device for the OOBM network, this requirement is not applicable.

Step 1: Configure an inbound ACL to bind to any OOBM interface connecting to the OOBM backbone which ensures that traffic destined to the OS10 OOBM router is only from the OOBM or NOC address space.

OS10(config)# ip access-list MGMT_TRAFFIC_FROM_NOC
OS10(config-ipv4-acl)# seq 10 permit ip 10.10.1.0/24 host 10.10.1.1
OS10(config-ipv4-acl)# seq 20 permit ip 10.10.1.0/24 host 10.10.2.1
OS10(config-ipv4-acl)# seq 30 deny ip any host 10.10.1.1 log
OS10(config-ipv4-acl)# seq 40 deny ip any host 10.10.2.1 log
OS10(config-ipv4-acl)# seq 50 permit ip 10.10.1.0/24 10.10.2.0/24
OS10(config-ipv4-acl)# seq 60 deny ip any any log
OS10(config-ipv4-acl)# exit

Step 2: Configure an inbound ACL to bind to any OOBM LAN interfaces which ensures that traffic destined to the OS10 OOBM router is from the OOBM LAN address space.

OS10(config)# ip access-list MGMT_TRAFFIC_FROM_OOBM_LAN
OS10(config-ipv4-acl)# seq 10 permit ip 10.10.2.0/24 host 10.10.1.1
OS10(config-ipv4-acl)# seq 20 permit ip 10.10.2.0/24 host 10.10.2.1
OS10(config-ipv4-acl)# seq 30 deny ip any host 10.10.1.1 log
OS10(config-ipv4-acl)# seq 40 deny ip any host 10.10.2.1 log
OS10(config-ipv4-acl)# seq 50 permit ip 10.10.2.0/24 10.10.1.0/24
OS10(config-ipv4-acl)# seq 60 deny ip any any log
OS10(config-ipv4-acl)# exit

Step 3: Apply the ACLs to the OOBM interfaces.

OS10(config)# interface ethernet1/1/1
OS10(conf-if-eth1/1/1)# ip access-group MGMT_TRAFFIC_FROM_NOC in
OS10(conf-if-eth1/1/1)# exit
OS10(config)# interface ethernet1/1/2
OS10(conf-if-eth1/1/2)# ip access-group MGMT_TRAFFIC_FROM_OOBM_LAN in
OS10(conf-if-eth1/1/2)# exit

Ensure that traffic from the managed network is not able to access the OOBM gateway router using either receive path or interface ingress ACLs.

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Dell_OS10_Switch_Y24M12_STIG.zip

Item Details

Category: SYSTEM AND COMMUNICATIONS PROTECTION

References: 800-53|SC-7a., CAT|II, CCI|CCI-001097, Rule-ID|SV-269880r1052242_rule, STIG-ID|OS10-RTR-000480, Vuln-ID|V-269880

Plugin: Dell_OS10

Control ID: aa9b7e4ff5683ab96da026ed4dfe67f904d5f367afe1f16644cfb95b8b0b84c4