Detections
Analytics
CISC-RT-000050 - The Cisco switch must be configured to authenticate all routing protocol messages using NIST-validated FIPS 198-1 message authentication code algorithm.
Warning! Audit Deprecated
This audit has been deprecated and will be removed in a future update.
View Next Audit VersionInformation
A rogue switch could send a fictitious routing update to convince a site's perimeter switch to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to learn confidential information about the site's network or used to disrupt the network's ability to communicate with other networks. This is known as a "traffic attraction attack" and is prevented by configuring neighbor switch authentication for routing updates. However, using clear-text authentication provides little benefit since an attacker can intercept traffic and view the authentication key. This would allow the attacker to use the authentication key in an attack.Since MD5 is vulnerable to "birthday" attacks and may be compromised, routing protocol authentication must use FIPS 140-2 validated algorithms and modules to encrypt the authentication key. This requirement applies to all IPv4 and IPv6 protocols that are used to exchange routing or packet forwarding information; this includes all Interior Gateway Protocols (such as OSPF, EIGRP, and IS-IS) and Exterior Gateway Protocols (such as BGP), MPLS-related protocols (such as LDP), and multicast-related protocols.
Solution
Configure routing protocol authentication to use a NIST-validated FIPS 198-1 message authentication code algorithm as shown in the example below:SW1(config)# key chain OSPF_KEY
SW1(config-keychain)# key 1
SW1(config-keychain-key)# key-string xxxxxxxxxxxx
SW1(config-keychain-key)# send-lifetime 00:00:00 Oct 1 2019 23:59:59 Dec 31 2019
SW1(config-keychain-key)# accept-lifetime 00:00:00 Oct 1 2019 01:05:00 Jan 1 2020
SW1(config-keychain-key)# cryptographic-algorithm hmac-sha-256
SW1(config-keychain-key)# key 2
SW1(config-keychain-key)# key-string kxxxxxxxxxxxxx
SW1(config-keychain-key)# send-lifetime 00:00:00 Jan 1 2020 23:59:59 Mar 31 2020
SW1(config-keychain-key)# accept-lifetime 23:55:00 Dec 31 2019 01:05:00 Apr 1 2020
SW1(config-keychain-key)# cryptographic-algorithm hmac-sha-256
SW1(config-keychain-key)# end
SW1(config)# int e2/2
SW2(config-if)# ip ospf authentication key-chain OSPF_KEY
See Also
https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Cisco_NX-OS_Switch_Y26M01_STIG.zip
Item Details
Audit Name: DISA Cisco NX OS Switch RTR STIG v3r3
References: CAT|II, CCI|CCI-000803, Rule-ID|SV-221075r999684_rule, STIG-ID|CISC-RT-000050, STIG-Legacy|SV-110969, STIG-Legacy|V-101865, Vuln-ID|V-221075
Plugin: Cisco
Control ID: e09206422106dcb22dd33ec6a20b8aabf5724bb43a94025b704faab4cb11608f