Detections
Analytics
CISC-ND-000980 - The Cisco switch must be configured to allocate audit record storage capacity in accordance with organization-defined audit record storage requirements.
Information
In order to ensure network devices have a sufficient storage capacity in which to write the audit logs, they need to be able to allocate audit record storage capacity. The task of allocating audit record storage capacity is usually performed during initial device setup if it is modifiable.The value for the organization-defined audit record storage requirement will depend on the amount of storage available on the network device, the anticipated volume of logs, the frequency of transfer from the network device to centralized log servers, and other factors.
Solution
Configure the buffer size for logging as shown in the example below:SW2(config)#logging buffered xxxxxxxx informational
See Also
https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Cisco_IOS_XE_Switch_Y22M07_STIG.zip
Item Details
Audit Name: DISA STIG Cisco IOS XE Switch NDM v2r3
References: CAT|II, CCI|CCI-001849, Rule-ID|SV-220547r508587_rule, STIG-ID|CISC-ND-000980, STIG-Legacy|SV-110549, STIG-Legacy|V-101445, Vuln-ID|V-220547
Plugin: Cisco
Control ID: 83b42900b0ca1fe6ac4e22f0067f6e97a8b146f11f5b462acdef71ebba3377c2