Detections
Analytics

18.6.14.1 Ensure 'Hardened UNC Paths' is set to 'Enabled, with 'Require Mutual Authentication' and 'Require Integrity' set for all NETLOGON and SYSVOL shares'

Information

This policy setting configures secure access to UNC paths.

The recommended state for this setting is: Enabled, with 'Require Mutual Authentication' and 'Require Integrity' set for all NETLOGON and SYSVOL shares.

Note: If the environment exclusively contains Windows 8.0 / Server 2012 (non-R2) or newer systems, then the 'Privacy' setting may (optionally) also be set to enable SMB encryption. However, using SMB encryption will render the targeted share paths completely inaccessible by older OSes, so only use this additional option with caution and thorough testing.

Rationale:

In February 2015, Microsoft released a new control mechanism to mitigate a security risk in Group Policy as part of the MS15-011 / MSKB 3000483 security update. This mechanism requires both the installation of the new security update and also the deployment of specific group policy settings to all computers on the domain from Windows Vista / Server 2008 (non-R2) or newer (the associated security patch to enable this feature was not released for Server 2003). A new group policy template (NetworkProvider.admx/adml) was also provided with the security update.

Once the new GPO template is in place, the following are the minimum requirements to remediate the Group Policy security risk:

\\*\NETLOGON RequireMutualAuthentication=1, RequireIntegrity=1

\\*\SYSVOL RequireMutualAuthentication=1, RequireIntegrity=1

Note: A reboot may be required after the setting is applied to a client machine to access the above paths.

Additional guidance on the deployment of this security setting is available from the Microsoft Premier Field Engineering (PFE) Platforms TechNet Blog here: Guidance on Deployment of MS15-011 and MS15-014.

Impact:

Windows only allows access to the specified UNC paths after fulfilling additional security requirements.

Solution

To establish the recommended configuration, set the following Device Configuration Policy to Enabled:

To access the Device Configuration Policy from the Intune Home page:

Click Devices

Click Configuration profiles

Click Create profile

Select the platform (Windows 10 and later)

Select the profile (Administrative Templates)

Click Create

Enter a Name

Click Next

Configure the following Setting

Path: Computer Configuration/Network/Network Provider
Setting Name: Hardened UNC Paths
Configuration: Enabled: \\*\NETLOGON RequireMutualAuthentication=1, RequireIntegrity=1 and
\\*\SYSVOL RequireMutualAuthentication=1, RequireIntegrity=1

Select OK

Continue through the Wizard to complete the creation of the profile (profile assignments, applicability etc.)

Note: More than one configuration setting from each of the Configuration profiles (ex: Administrative Templates, Custom etc.) can be added to each Device Configuration Policy.

Default Value:

Disabled. (No UNC paths are hardened.)

See Also

https://workbench.cisecurity.org/benchmarks/14355

Item Details

Category: IDENTIFICATION AND AUTHENTICATION

References: 800-53|IA-3(1)

Plugin: Windows

Control ID: 894717d6a2f94ae58a15e5db9e4f7dc10b12d8413a94917c336256b327b9493f