EX13-EG-000150 - Exchange Receive connectors must control the number of recipients per message.

Information

Email system availability depends in part on best practice strategies for setting tuning configurations.

This configuration controls the maximum number of recipients who will receive a copy of a message at one time. This tunable value is related to throughput capacity and can enable the ability to optimize message delivery.

Note: There are two types of default Receive connecters:

'Client Servername' accepts SMTP connections from all non-MAPI clients, such as POP and IMAP. As POP and IMAP are not authorized for use in DoD, these should not be present. Their default value for MaxRecipientsPerMessage is 200.

'Default Servername' accepts connections from other Hub Transport servers and any Edge Transport servers. Their default value for MaxRecipientsPerMessage is 5000.

Solution

Update the EDSP.

Open the Exchange Management Shell and enter the following command:

Set-ReceiveConnector -Identity <'IdentityName'> -MaxRecipientsPerMessage 5000

Note: The <IdentityName> value must be in quotes.

or

The value as identified by the EDSP that has obtained a signoff with risk acceptance.

Repeat the procedure for each Receive connector.

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_MS_Exchange_2013_Y21M12_STIG.zip

Item Details

Category: SYSTEM AND COMMUNICATIONS PROTECTION

References: 800-53|SC-5(2), CAT|II, CCI|CCI-001095, Rule-ID|SV-84477r1_rule, STIG-ID|EX13-EG-000150, Vuln-ID|V-69855

Plugin: Windows

Control ID: 9db58df4c63eca72ca1b5f4b0c35e5f2635107cf4855212b42e53519b14cfd26