CISC-ND-000110 - The Cisco switch must be configured to automatically audit account disabling actions - aaa accounting default group

Information

Account management, as a whole, ensures access to the network device is being controlled in a secure manner by granting access to only authorized personnel. Auditing account disabling actions will support account management procedures. When device management accounts are disabled, user or service accessibility may be affected. Auditing also ensures authorized active accounts remain enabled and available for use when required.

Solution

Configure the switch to log account disabling using the following steps:

Step 1: Configure the AAA servers as shown in the example below:

SW1(config)# radius-server host 10.1.48.10
SW1(config)# radius-server host 10.1.48.12

Step 2: Configure an AAA server group as shown in the example below:

SW1(config)# aaa group server radius RADIUS_SERVERS
SW1(config-radius)# server 10.1.48.10
SW1(config-radius)# server 10.1.48.12
SW1(config-radius)# exit

Step 3: Enable AAA accounting as shown in the example below:

SW1(config)# aaa accounting default group RADIUS_SERVERS
SW1(config)# end

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Cisco_NX-OS_Switch_Y21M10_STIG.zip

Item Details

Category: ACCESS CONTROL

References: 800-53|AC-2(4), CAT|II, CCI|CCI-001404, Rule-ID|SV-220477r604141_rule, STIG-ID|CISC-ND-000110, STIG-Legacy|SV-110601, STIG-Legacy|V-101497, Vuln-ID|V-220477

Plugin: Cisco

Control ID: 1cfbad0d4703874b69167080b70cc1926d1c8275392f5054f080a6434f2f9b68