CISC-ND-001000 - The Cisco switch must be configured to generate an alert for all audit failure events - logging trap

Warning! Audit Deprecated

This audit has been deprecated and will be removed in a future update.

View Next Audit Version

Information

It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected.

Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less).

Solution

Configure the Cisco switch to send critical to emergency log messages to the syslog server as shown in the example below:

4(config)#logging host x.x.x.x
SW4(config)#logging trap critical

Note: The parameter 'critical' can replaced with a lesser severity level (i.e., error, warning, notice, informational).

See Also

https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Cisco_IOS_Switch_Y21M07_STIG.zip

Item Details

Category: AUDIT AND ACCOUNTABILITY

References: 800-53|AU-12, CAT|II, CCI|CCI-001858, Rule-ID|SV-220600r521267_rule, STIG-ID|CISC-ND-001000, STIG-Legacy|SV-110429, STIG-Legacy|V-101325, Vuln-ID|V-220600

Plugin: Cisco

Control ID: 45b7e6e04e79b51c87b966143867b33859889bd8a33cc2d709885a1a5ffeec98